• 제목/요약/키워드: Peak flood

검색결과 315건 처리시간 0.02초

유출저감을 위한 유역내 침투시설의 적용 (An Application of Infiltration Facilities for Reducing the Runoff in the Basin)

  • 이재준;설지수
    • 한국방재학회 논문집
    • /
    • 제11권3호
    • /
    • pp.133-141
    • /
    • 2011
  • 유역의 도시화는 유출총량과 첨두유량의 증가와 도달시간이 감소시키며, 홍수피해의 위험성을 더욱 크게 만든다. 침투시설은 도시유역의 유출총량과 첨두유량을 감소시킬 수 있고, 그 종류에는 침투트렌치와 투수성 포장재 등이 있다. 본 연구에서는 침투시설 설치에 따른 우수유출저감효과를 알아보기 위하여 경북 구미시 옥계동의 $0.18km^2$와 공단동의 $0.67km^2$의 면적을 가진 도시유역을 대상으로 하여 각각의 유역특성을 분석하고, 유출총량 및 첨두유량의 저감량을 WinSLAMM 모형을 이용하여 분석하였다. 또한, 침투시설 설치에 따른 첨두유량저감효과를 분석하였고, 침투시설 면적비와 유출저감률과의 관계식을 도출하였다.

Fuzzy추론 시스템과 신경회로망을 결합한 하천유출량 예측 (Runoff Forecasting Model by the Combination of Fuzzy Inference System and Neural Network)

  • 허창환;임기석
    • 한국농공학회논문집
    • /
    • 제49권3호
    • /
    • pp.21-31
    • /
    • 2007
  • This study is aimed at the development of a runoff forecasting model by using the Fuzzy inference system and Neural Network model to solve the uncertainties occurring in the process of rainfall-runoff modeling and improve the modeling accuracy of the stream runoff forecasting. The Neuro-Fuzzy (NF) model were used in this study. The NF model, recently received a great deal of attention, improve the existing Neural Networks by the aid of the Fuzzy theory applied to each node. The study area is the downstreams of Naeseung-chun. Therefore, time-dependent data was obtained from the Wolpo water level gauging station. 11 and 2 out of total 13 flood events were selected for the training and testing set of model respectively. The schematic diagram method and the statistical analysis are conducted to evaluate the feasibility of rainfall-runoff modeling. The model accuracy was rapidly decreased as the forecasting time became longer. The NF model can give accurate runoff forecasts up to 4 hours ahead in standard above the Determination coefficient $(R^2)$ 0.7. In the comparison of the runoff forecasting using the NF and TANK models, characteristics of peak runoff in the TANK model was higher than ones in the NF models, but peak values of hydrograph in the NF models were similar.

다목적 저류지의 수질개선을 위한 설계과정 및 적용에 관한 연구 - 남악 신도시 개발지를 대상으로 - (A Study on the Application and Design Procedure of Multi-Purpose Wet Detention Ponds for Improving Water Quality - Case Study of NamAk New Town Development Area -)

  • 우창호
    • 한국환경복원기술학회지
    • /
    • 제7권1호
    • /
    • pp.97-109
    • /
    • 2004
  • The disposal of stormwater is one of the major problems in urban water management. One method of reducing peak runoff rates and other detrimental impacts of stormwater is detention storage. Detention ponds as a water quality control alternatives have been investigated by a number of researchers. Recognizing multiple roles such as flood peak attenuation, pollution removal and aesthetic enhancement, the design and management of detentions ponds deserve more research. The purpose of this research is to establish design criteria wet detention ponds to improve water quality. Water quality in detention pond discharge might be improve with physical, chemical and biological alterations. Physical alteration was focused in this study. There are several methods for estimating the suspended solid control capability of wet detention ponds. Existing models of suspended solids removal are based on sedimentation and gravity settling theory. The pollutant trap efficiency of pond is a function of several interrelating factors. Detention time is the most important factor, because it determine gravity settling quantities of pollutants. Desirable modification of physical factors for improvement of water quality in wet detention ponds are volume ratio, area ratio, length to width ratio, depth, out let location, bottom soil type. In order to apply design procedure in actual site, Namak new town development area was selected.

방사선 검출기용 데이터획득장치로서의 오실로스코프 활용 가능성 평가 (Feasibility Study of Data Acquisition System based on Oscilloscope for Radiation Detector)

  • 양진규;강지훈
    • 전기학회논문지
    • /
    • 제66권12호
    • /
    • pp.1804-1809
    • /
    • 2017
  • A data acquisition (DAQ) system based on oscilloscope was developed and evaluated for radiation detector. The dedicated LabVIEW program that perform the oscilloscope control and the data process was developed. Triggered events for each analog channel were acquired and the output signals were subsequently digitized and recorded for offline processing. Radiation pulse generation circuit was developed to evaluate the intrinsic characteristics of DAQ system. Energy linearity and energy resolution performances were assessed by voltage-peak channels and FWHM obtained from Gaussian fit, respectively. Radiation detector consists of LYSO and GAPD array. The 16 output signals were multiplexed by the RCD networks, and they were fed into the custom-made preamplifiers. Voltage-peak channels was linearly changed as a function of input voltage and the estimated coefficient of determination ($R^2$) was 0.999. No considerable changes in voltage resolution were observed. All 16 crystals were clearly identifiable on the resulting flood image and the mean energy resolution was ~15.1%. This study demonstrated that it is feasible to develop the DAQ system based on oscilloscope and LabVIEW program for radiation detector and the proposed approach offers opportunities to build simple DAQ system in various radiation measurement field.

국내 기존 합성단위도 방법의 비교 (The Comparison of Existing Synthetic Unit Hydrograph Method in Korea)

  • 정성원;문장원
    • 한국수자원학회논문집
    • /
    • 제34권6호
    • /
    • pp.659-672
    • /
    • 2001
  • 수공구조물의 설계홍수량 산정은 일반적으로 유출자료의 통계적 분석을 통해 산정된다. 하지만 자료의 부족으로 통계적인 방법을 이용하기 힘든 경우 이에 대한 대안으로 주로 강우-유출모형이 이용되고 있으며, 이 중 유출모형은 합성단위도법이 많이 이용되고 있다. 이러한 합성단위도 방법 중 국내에서는 Nakayasu 방법, Snyder 방법, SCS 방법, HYMO 방법 등이 주로 이용되거나 제안되었으며, 본 연구에서는 이러한 기존 방법들과 최근 개발된 건기연의 합성단위도법을 총 10개 유역의 지점 대표단위도와 비교 검토함으로써 국내 수문특성에 가장 적합한 방법을 결정해보고자 하였다. 먼저 지점 대표단위도와 각 방법으로부터 합성된 단위도의 첨두유량 및 첨두시간을 비교하였으며, 평균제곱근오차의 산정과 비교를 통해 단위도의 형상을 비교하였다. 그 결과, 일본에서 개발된 Nakayasu 방법은 단위도의 첨두유량, 첨두시간과 단위도의 형상에서 실제와 매우 다른 왜곡된 결과를 나타내고 있었으며, 나머지 방법들은 지점에 따라 차이는 있으나 전반적으로 건기연(2000)의 방법이 실제 대표단위도에 가장 근접한 결과를 주고 있었다. 또한, 합성단위도 개발에 이용된 자료, 지점 및 유역특성 등을 조사한 결과, 과거의 성과를 함께 이용한 건기연의 방법이 가장 포괄적임을 알 수 있었다. 따라서 수문실무에서 합성단위도법을 적용할 경 우, Nakayasu 방법을 이용하여 설계홍수량을 추정하는 방법은 지양되어야 할 것으로 보여지며, 건기연의 방법을 이용하는 것이 가장 적절한 결과를 줄 것으로 판단할 수 있었다. 하지만 만약 SCS나 Nakayasu 방법을 적용한다 할 지라도 국내 자료를 통해 해당 모형의 매개변수나 회귀적 등을 조정하여 이용한다면 보다 적절한 결과를 얻을 수 있을 것으로 생각된다.다. 재생 $Al_2$O$_3$시편의 치밀화를 위하여 5~20wt%의 폐유리분말을 첨가하여 1200~1$650^{\circ}C$에서 5시간 소결한 시편은 폐유리분말의 첨가량이 증가함에 따라 최대 밀도와 3점곡강도를 나타내는 온도는 감소하였으나, 140$0^{\circ}C$이상에서는 페유리분말을 첨가하지 않은 시편에 비하여 밀도와 3점곡강도가 감소하여 재생 $Al_2$O$_3$세라믹스의 소결성 향상에는 기여하지 못하였다.TEX>$_{0}$=32900 GHz, $\tau$$_{f}$ =-2.2 ppm/$^{\circ}C$이었다. B$_2$O$_3$첨가의 경우 최적의 첨가량은 1.0~2.5 wt%이었으며 8$50^{\circ}C$에서 소결한 경우 얻어진 유전특성은 $\varepsilon$$_{r}$20.3~22.1, Q$\times$f$_{0}$=48700~54700 GHz, $\tau$$_{f}$ =+2.4~+8.2ppm/$^{\circ}C$이었다.describe the desired urban resort nature of the stadium. From this historical perspective it seems that stadiums have great potential as urban resorts. The factor that will determine their success is

  • PDF

확률강우의 적정시간분포 결정에 관한 연구 (A Case Study for the Determination of Time Distribution of Frequency Based Rainfall)

  • 이정기;김형수;강인주
    • 한국습지학회지
    • /
    • 제6권3호
    • /
    • pp.71-81
    • /
    • 2004
  • 최근 증가하고 있는 집중호우로 인해 피해 규모가 대형화 되어가고 있는 추세로 수공구조물 설계 시 보다 정확한 수문분석을 요구 하고 있다. 강우의 시간분포는 정확한 수공구조물의 설계 시 첨두홍수량 산정에 가장 중요한 영향을 미친다. 따라서 본 연구에서는 대전지역의 기상학적, 지형학적 특성에 맞는 적절한 강우분포형을 제시하고자 한다. 본 연구는 대전지역의 강우관측이 시작된 1969년부터 2002년까지 34년 중 강우가 집중되는 기간인 5월부터 10월사이의 강우자료를 바탕으로 강우분석을 실시하였다. Huff 방법에 의한 강우분포의 형태는 초기에 호우가 집중되는 1분위로 나타났고, 본 연구에 의한 방법은 Huff방법의 3분위에 속하는 53%에서 호우가 집중되는 양상으로 나타났다. 즉, Huff 방법과 본 연구에서 제안한 방법으로 호우사상의 시간분포를 결정하였는데 그 형태가 다르게 나타났다. 이는 Huff 방법이 호우사상별로 분위를 결정 하는 반면 본 연구에서는 지속시간별 강우량을 누가하고 지속시간별 분포형태를 무차원화하여 결정하였다. 강우의 시간분포 형태가 다른 두 가지 방법으로 실제 유역인 갑천유역에 적용하여 홍수량을 산정하였다. 유효우량 산정 시 토양의 특성을 고려한 SCS방법을 사용하였고, 홍수량 산정은 단위도법에 의해 추정하였다. 홍수량 추정결과 100년 빈도, 지속시간 24시간 첨두홍수량은 Huff 방법의 경우 $3421.20m^3/sec$로 나타났고, 본 연구 방법의 경우는 $3493.38m^3/sec$로 나타났다. 이처럼 첨두홍수량의 차이가 나타난 이유는 강우의 시간분포와 홍수도달시간이 서로 상이하여 다른 결과를 보였고, 본 연구 방법으로 강우를 분포시켰을 때 첨두홍수량이 Huff 방법보다 $72.18m^3/sec$ 정도 커짐을 알 수 있었다. 유효우량 산정 시 초기의 강우량이 크면 손실우량도 커지고, 강우의 시간분포 형태에 따라 첨두홍수량도 차이를 보이게 되므로 강우의 시간분포 결정시 신중을 기하여야 할 것으로 사료된다.

  • PDF

L-모멘트법을 이용한 지역홍수빈도분석을 통한 금강유역 미계측 유역의 설계홍수량 산정 (Estimating design floods for ungauged basins in the geum-river basin through regional flood frequency analysis using L-moments method)

  • 이진영;박동혁;신지예;김태웅
    • 한국수자원학회논문집
    • /
    • 제49권8호
    • /
    • pp.645-656
    • /
    • 2016
  • 본 연구에서는 금강유역에 대한 지역홍수빈도분석을 실시하고 재현기간에 따른 홍수량을 추정하는 관계식을 제안하였다. 유역 내 유량자료의 수문학적 독립성과 동질성에 대한 검증을 위하여 Lag-1 자기상관성 분석, 동질성 검정, 이상치 검정, 불일치척도 검정을 수행하였다. 검정 결과, 금강유역의 대상 관측소들은 시간에 대하여 독립적이고 동질적 모집단에 속하며 이상치는 없었다. 일반 극치 분포(GEV), 3변수 대수정규 분포(LN-III), 피어슨-III 분포(P-III), 일반 로지스틱 분포(GLO), 일반 파레토 분포(GPA) 등 5개의 3변수 확률분포함수에 대한 L-모멘트비도와 평균가중거리(AWD), 그리고 $Z^{DIST}$ 적합도 산정 결과, GLO 분포함수가 금강유역의 최적 확률분포형으로 선정되었다. GLO 분포를 바탕으로 지역홍수빈도를 추정하는 회귀모형을 제안하였고, 강경 관측소의 관측 유량을 이용하여 회귀모형의 적용성을 검증하였다.

부자 측정 시 식생을 고려한 유량산정에 관한 연구 (Discharge Computation from Float Measurement in Vegetated Stream)

  • 이태희;정성원
    • 대한토목학회논문집
    • /
    • 제39권2호
    • /
    • pp.307-316
    • /
    • 2019
  • 하도 내 식생발달은 흐름저항을 크게하여 홍수 시 하천 수위를 상승시키고 수위-유량관계의 변화에도 영향을 미치고 있다. 홍수 시 수위가 첨두에 도달하고 하강하여 하도 내 드러난 식생은 대부분 도복(倒伏, prone) 상태에 있다. 이렇게 식생이 도복상태로 되어있는 식생층 구간은 식생된 개수로 흐름의 유속분포를 고려하였을 때 유속이 0인 지점의 높이로 고려된다(Stephan and Guthnecht, 2002). 그러나 부자 측정에 의한 유량산정에 있어서 식생층 구간의 높이를 고려하지 않고 하상높이를 유하면적으로 적용하면 유량이 과대 산정되는 경향이 발생한다. 본 연구에서는 식생된 하천에서 정도 높은 유량을 산정하기 위해 영강의 점촌, 내성천의 향석 지점에서 홍수 후 식생층 높이를 측량하고 통수단면적에서 식생층 투영면적을 제외하여 유량을 산정하였다. 그 결과, 유량의 규모에 따라 차이는 있지만 최소 4.34 %에서 최대 10.82 %의 유량편차를 보였다. 따라서 홍수 시 통수단면적을 적용하여 유량을 산정하는 유속-단면적 방법에 있어서 식생하천에서 식생층 높이의 투영면적을 고려하여 유량을 산정한다면 좀더 적합한 유량산정이 이루어질 것으로 판단된다.

선형 Model에 의한 소류역에 있어서의 무차원 단위도 유도에 관한 연구 (A study on the derivation of Dimensionless Unit Hydrographs by the Linear model in the small watersheds)

  • 이순혁;한중석
    • 한국농공학회지
    • /
    • 제23권3호
    • /
    • pp.78-87
    • /
    • 1981
  • This study was attempted to get dimensionless unit hydrograph by linear model which can be used to the estimation of flood for the development of Agricultural water resources and laid emphasis on the application of dimensionless unit hydrographs for the ungaged watersheds by applying linear model. The results summarized through this study are as follows. 1.Peak discharge is found to be Qp= CAR (C =0. 895A-o.145) having high significance between peak discharge, Qp and effective rainfall, R within the range of small watershed area, 84 to 470km2. consequently, linearity was acknowledged between rainfall and runoff. Reasonability is confirmed for the derivation of dimensionless unit hydrograph by linear model. 2.Through mathematical analysis, formula for the derivation of dimensionless unit hydrograph was derived. qp--p=(tp--t)n-1[e-(n-1)](tp--t-1) 3.Moment method was used for the evaluation of storage constant, K and shape parameter, n for the derivation of dimensionless unit hydrograph. Storage constant, K is more closely related with the such watershed characteristics as length of main stream and slopes. On the other hand, the shape parameter, n was derived with such watershed characteristics as watershed area, river length, centroid distance of the basin and slopes. 4.Time to peak discharge, Tp could be expressed as Tp=1. 25 (√s/L)0.76 having a high significance. 5.Dimensionless unit hydrographs by linear model stood more closely to the observe dimensionless unit hydrographs On the contrary, dimensionless unit hydrographs by S.C. S. method has much difference in comparison with linear model at the falling limb of hydrographs. 6.Relative errors in the q/qp at the point of 0.8 and 1.2 for the dimensionles ratio by linear model and S. C. S. method showed to be 2.41, 1.57 and 4.0, 3.19 percent respectively to the q/qp of observed dimensionless unit hydrographs. 7.Derivation of dimensionless unit hydrograph by linear model can be accomplished by linking the two empirical formulars for storage constant, K, and shape parameter, n with derivation formular for dimensionless unit hydrograph for the ungaged small watersheds.

  • PDF

중규모 유역에서 Clark 방법과 ModClark 방법을 이용한 유출해석 시적정 소유역 분할 개수에 대한 연구 (A Study on Proper Number of Subbasin Division for Runoff Analysis Using Clark and ModClark Methodsdd in Midsize Basins)

  • 이동훈;최종인;신수훈;이재응
    • 대한토목학회논문집
    • /
    • 제33권1호
    • /
    • pp.157-170
    • /
    • 2013
  • 본 연구에서는 강우-유출 모형을 이용하여 소유역 분할에 따른 유출변화 특성을 파악한 후 다수의 시험유역에 대해 적합한 소유역 분할개수를 제시하였다. 강우-유출과정을 모의하기 위하여 HEC-HMS 내의 집중형 모형인 Clark 방법과 준분포형 모형인 ModClark 방법을 시험유역인 안동댐, 임하댐 및 평창강의 3개 유역에 적용하였다. 각각의 시험유역에 대하여 1개, 3개, 5개, 6개, 7개, 9개, 10개, 12개, 15개의 9가지 case로 등면적 분할을 하였으며, 모의된 첨두유량과 첨두시간을 실제 관측된 수문곡선과 비교 분석하였다. 시험유역에 대한 소유역 분할에 따른 유출모의 결과 소유역 분할 수가 증가할수록 첨두유량은 증가하였고 첨두시간은 짧아졌으며 이러한 경향은 일정 분할개수 이후 급격히 감소하는 것으로 나타났다. 본 연구에서는 이러한 경향이 감소하기 시작하는 소유역 분할 수를 최소분할개수로 나타내었으며, 첨두유량 및 첨두시간을 종합적으로 고려하였을 때 안동댐 및 임하댐 유역은 최소분할개수가 5개, 평창강 유역은 7개로 분석되었다.