• Korean Journal of Cognitive Science
• /
• v.35 no.1
• /
• pp.49-95
• /
• 2024

Polygraph examination, statement validity analysis and P300-based concealed information test are major three examination tools, which are use to determine a person's truthfulness and credibility in criminal procedure. Although polygraph examination is most common in criminal procedure, but it has little admissibility of evidence due to the weakness of scientific basis. In 1990s to support the weakness of scientific basis about polygraph, Farwell and Donchin proposed the P300-based concealed information test technique. The P300-based concealed information test has two strong points. First, the P300-based concealed information test is easy to conduct with polygraph. Second, the P300-based concealed information test has plentiful scientific basis. Nevertheless, the utilization of P300-based concealed information test is infrequent, because of the quantity of probe stimulus. The probe stimulus contains closed information that is relevant to the crime or other investigated situation. In tradition P300-based concealed information test protocol, three or more probe stimuli are necessarily needed. But it is hard to acquire three or more probe stimuli, because most of the crime relevant information is opened in investigative situation. In addition, P300-based concealed information test uses oddball paradigm, and oddball paradigm makes imbalance between the number of probe and irrelevant stimulus. Thus, there is a possibility that the unbalanced number of probe and irrelevant stimulus caused systematic underestimation of P300 amplitude of irrelevant stimuli. To overcome the these two limitation of P300-based concealed information test, one-probe P300-based concealed information test protocol is explored with various machine learning algorithms. According to this study, parameters of the modified one-probe protocol are as follows. In the condition of female and male face stimuli, the duration of stimuli are encouraged 400ms, the repetition of stimuli are encouraged 60 times, the analysis method of P300 amplitude is encouraged peak to peak method, the cut-off of guilty condition is encouraged 90% and the cut-off of innocent condition is encouraged 30%. In the condition of two-syllable word stimulus, the duration of stimulus is encouraged 300ms, the repetition of stimulus is encouraged 60 times, the analysis method of P300 amplitude is encouraged peak to peak method, the cut-off of guilty condition is encouraged 90% and the cut-off of innocent condition is encouraged 30%. It was also conformed that the logistic regression (LR), linear discriminant analysis (LDA), K Neighbors (KNN) algorithms were probable methods for analysis of P300 amplitude. The one-probe P300-based concealed information test with machine learning protocol is helpful to increase utilization of P300-based concealed information test, and supports to determine a person's truthfulness and credibility with the polygraph examination in criminal procedure.

• The Journal of the Acoustical Society of Korea
• /
• v.13 no.5
• /
• pp.77-82
• /
• 1994

In speech signal processing, it is very important to detect the pitch exactly. Although various methods for detecting the pitch of speech signals have been developed, it is difficult to exactly extract the pitch for wide range of speakers and various utterances. Thus we propose a new pitch detection algorithm which takes advantage of the G-peak extraction. It is a method to detect the pitch period of the voiced signals by finding MZCI (maximum zero-crossing interval) of the G-peak which is defined as cut-off bandwidth rate of LPF (low pass filter). This algorithm performs robustly with a gross error rate of 3.63% even in 0 dB SNR environement. The gross error rate for clean speech is only 0.18%. Also it is able to process all courses with high speed.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.6
• /
• pp.40-44
• /
• 2014

In this paper, maximum power is the lowering device using the facility's energy use and peak load electricity through analyzing attitude should like to make it reduce its power base rate. Simulator to manage the demand for power, a maximum electric power base power from electronic watt-hour meters by a device's signal, predictive power, the current power by computing the goal of power for less than Maximum peak power and peak shift, so that you can manage, and peak York, which role you want a cut Metal heat treatment result which analyzes the data, demand for electricity company over the years of analyzing the characteristics of each load, and effects and Reducing power consumption device every month identified seven Sequence control to the load system and successful power control is about showing that the defined goals.

• Asian-Australasian Journal of Animal Sciences
• /
• v.26 no.5
• /
• pp.723-731
• /
• 2013

This study provides a comparative analysis of the effects of pre-slaughter penetrative and non-penetrative stunning and post-slaughter stunning on meat quality attributes in longissimus lumborum (LL) and semitendinosus (ST) muscles in heifers. Ten animals were assigned to each of four treatment groups: i) animals were subjected to conventional Halal slaughter (a clean incision through the structures at the front of the upper neck - the trachea, oesophagus, carotid arteries and jugular veins) and post-cut penetrating mechanical stun within 10 to 20 s of the neck cut (Unstunned; US); ii) high power non-penetrating mechanical stunning followed by the neck cut (HPNP); iii) low power non-penetrating mechanical stunning followed by the neck cut (LPNP); and iv) penetrative stunning using a captive bolt pistol followed by the neck cut (P). For each carcass, muscle samples were removed within 45 min of slaughter, portioned and analysed for pH, cooking loss, water holding capacity (WHC), tenderness (WBS), lipid oxidation (TBARS) and color, over a two week storage period. Stunning did not affect pH and cooking loss. Significant differences in water holding capacity, tenderness, lipid oxidation and color were present at different storage time points. HPNP stunning resulted in lower WHC and color values, particularly lightness ($L^*$), higher TBARS values and peak force values compared with those stunned using LPNP, P and US. These adverse effects on quality were mostly encountered in the ST muscle. In conclusion, the meat quality achieved using P, LPNP and US treatments was comparable, and no treatment stood out as considerably better than another.

• Journal of Korea Multimedia Society
• /
• v.20 no.8
• /
• pp.1330-1337
• /
• 2017

In off-line phase of the preliminary Cut-off indoor positioning scheme, which is one of the indoor positioning scheme using the fingerprint, relative ranks of peak RSSIs received from beacons at each reference point are stored in the fingerprint map. In some reference points, signals of multiple beacons may be received. In this case, the relative ranks may be different when constructing fingerprint and when receiving signals in real-time. To solve this problem, we propose a method to utilize only up to five beacons with high ranking when constructing a fingerprint and when receiving signals in real-time and comparing them with stored information of a fingerprint. Experiments were conducted on the estimation probabilities and the average error when using this method. Those are compared with the previous methods. Experimental results show that the estimation probabilities and the average error are improved by removing only the remaining five beacons at each reference point of the fingerprint.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.20 no.6
• /
• pp.714-719
• /
• 2011

The surface roughness depending on the machining method is very important because is produce a finished product through riveting, sealing, bonding, and special paint in order to curb the turbulence and air resistance which occur between the sheets. Aluminum alloy 2024 which is widely used for interior and exterior material of aircraft are tested. Jin-young JW-60C wire cutting machine was used in this experiment. In this paper, the experimental investigation has been performed to find out the influence of the surface roughness and surface shape characteristics on the wire-cut EDM of discharge energy in aluminium alloy 2024. The selected experimental parameters are peak current, no-load voltage, off time and feed rate. The experimental results give the guideline for selecting reasonable machining parameters. The high discharge energy on the idle time, almost no change in surface roughness can be seen.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.9 no.4
• /
• pp.266-272
• /
• 2009

In the present work three dimensional process and device simulations were employed to study the performance variations with RTA. It is observed that with the increase in RTA temperature, the arsenic dopants from the source /drain region diffuse laterally under the spacer region and simultaneously acceptors (Boron) are redistributed from the central axis region of the fin towards the Si/SiO2 interface. As a consequence both drive current and peak cut-off frequency of an n-FinFET are observed to improve with RTA temperatures. Volume inversion and hence the flow of carries through the central axis region of the fin due to reduced scattering was found behind the performance improvements with increasing RTA temperature.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.966-971
• /
• 2009

The recent environmental protection trend requires more strict energy saving, therefore every transportation system should reduce energy consumption to the minimum value. High-efficiency operation system, energy saving and CO2 emissions shall be addressed as important issue in railway system. These issues are the most essential factors of railway, compared to major public transportation system. Recently, saving energy in the electric railway system has been studied. For such new energy saving, the Energy storage system is considered for saving energy. Energy saving is possible by efficient use of regenerated energy. Regenerated energy is recycled amongst vehicles by mean of charge and discharge corresponding to powering and braking of electric vehicle operations. This energy saving contributes to cut CO2 to reduce greenhouse gas emissions. Recycling regenerated energy demonstrate significant effect on peak cut of consumption energy in railway substation. Absorption of excess energy avoids regeneration failure due to high traction voltage. This paper presents effects by applying the energy storage system to SeoulMetro Line 2.

• Journal of Magnetics
• /
• v.21 no.2
• /
• pp.187-191
• /
• 2016

Retrieving the equivalent electromagnetic parameters (permittivity and permeability) plays an important role in the research and application of metamaterials. Frequency dispersion of magnetic permeability has been theoretically predicted in a metamaterial composed of cut wire pairs (CWP) separated by dielectric substrate on the basis of circuit theory. Magnetic resonance resulting from antiparallel currents between the CWP is observed at the frequency of minimum reflection loss (corresponding to absorption peak) and effective resonator size can be determined. Having calculated the circuit parameters (inductance L, capacitance C) and resonance frequency from CWP dimension, the frequency dispersion of permeability of Lorentz like magnetic response can be predicted. The simulated resonance frequency and permeability spectra can be explained well on the basis of the circuit theory of an RLC resonator.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.4
• /
• pp.32-39
• /
• 1998

Remez exchange algorithm was applied to realize an IF SAW filter for CDMA cellular phone systems. A SAW filter with withdrawal weighted transducers was simulated and then fabricated on 42.75.deg. ST-cut Quaritz wafer. Excellent agreement wasobtained between calculated andmeasured responses. Fabricated SAWfilterswere mounted on ceramic SMD package for reducing their size and volume. SAW filters were measured under matched circuit. As a result, 5 dB bandwidth of 1.32 MHz, 33dB bandwidth of 1.76 MHz, insertion loss of 13.8 dB and peak to peak ripple at passband of 0.26 dB were obtained. Linear group delay responses at passband were also obtained. These characteristics were good for practical use of IF SAW filter for CDMA system.