• Journal of Oral Medicine and Pain
• /
• v.25 no.1
• /
• pp.87-97
• /
• 2000

This study was performed to investigate the effects of repetitive mandibular opening movement and change of head posture on the vibration of temporomandibular(TM) joint. For this study, 23 patients with internal derangement of TM joint were selected. All they had clinically noticeable TM joint sound. Observation of the joint vibration were performed in four head postures, namely, natural head posture (NHP), forward head posture(FHP), upward head posture(UHP), and downward head posture(DHP). For recording of joint sound vibration, Sonopak of Biopak system(Bioresearch Inc., Milwaukee, USA) was used, The author could take results related to integral higher than 300Hz, integral lower than 300Hz, ratio of integral higher than 300Hz to integral lower than 300Hz, total integral which was sum of higher and lower integral, peak amplitude, and peak frequency in each opening movement, which was carried out three times in each head posture. Integral means amount of vibration. The data obtained were analysed by SPSS windows program and the results of this study were as follows : 1. In NHP, total integral in right TM joint was 5O.3Hz in the first opening, 67.9Hz in the second opening, and 74.0Hz in the third opening movement, bur there was no significant increase of total integral with repetitive opening movement. This finding was similar in left TM joint. Integral lower than 300Hz were higher than integral higher than 300Hz in almost every opening movement. 2. There was no significant difference of total integral between right and left side of TM joint, but there was a tendency of higher total integral in right TM joint than that in left TM joint except for results in DHP. 3. Peak amplitude in NHP ranged from 2.0 to 4.7, and peak frequency in NHP were 101.4-170.0Hz. And there was no consistent findings related to increase or decrease of these value according to repetitive opening in each head posture. 4. Change of head posture did not result any difference in integral, peak amplitude, and peak frequency. In conclusion, change of head posture and repetitive mandibular opening movement did not make any significant effect on the vibration of temporo-mandibular joint, especially, on total integral, peak amplitude, and peak frequency.

• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.1
• /
• pp.15-26
• /
• 2013

This paper proposes a classification method of parallel, vertical parking states and pillars for parking assist system using ultrasonic sensors. Since, in general parking space detection module, the compressed amplitude of ultrasonic data are received, the analysis of them is difficult. To solve these problems, in preprocessing state, symmetric transform and noise removal are performed. In feature extraction process, four features, standard deviation of distance, reconstructed peak, standard deviation of reconstructed signal and sum of width, are proposed. Gaussian fitting model is used to reconstruct saturated peak signal and discriminability of each feature is measured. To find the best combination among these features, multi-class SVM and subset generator are used for more accurate and robust classification. The proposed method shows 92 % classification rate and proves the applicability to parking space detection modules.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.6
• /
• pp.799-806
• /
• 2004

This paper presents a scheme for finding an optimal combination of design parameters affecting on the handling performance of a large truck using design of experiments. The average of the sum of peak-to-peak roll angles at the first and second part of the double lane is used as an objective function for design of experiments. Six design parameters are selected from all possible parameters affecting on the handling performance. The table of orthogonal arrays is made by 27 times simulations. A computational model of a large truck is developed by MSC/NASTRAN and MSC/ADAMS, and verified the reliability of it with the results of vehicle tests performed in a double lane change course. It is used for the simulations. Analyses of variance and factor effect of the table of orthogonal arrays are performed. This paper proposes an optimal combination of those six design parameters for improving the handling performance of the large truck.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.11a
• /
• pp.361-365
• /
• 2006

In order to predict method of blasting vibration in ground and it's resident located around blasting field in urban area, blasting vibration characteristics were measured the vibration velocity(cm/sec), vibration acceleration($cm/sec^2$), vibration acceleration level(dB) and vibration level(dB(V)). The charged powder were used to 1.25kg and measuring sites were 25 points front 4m to 90m at the ground. The correlation of vibration velocity, vibration acceleration, vibration acceleration level and vibration level by square root scaled distance and cube root scaled distance were investigated. The correlation of PPV(peak particle velocity) velocity by SRSD(square root scaled distance) and CRSD(cube root scaled distance) was 0.85 and 0.86 and the correlation of PVS(peak vector sum) velocity by SRSD and CRSD was 0.82. Also vibration acceleration, vibration acceleration level and vibration level by SRSD and CRSD was 0.61, 0.62 and 0.82, respectively. As results, the vibration velocity and vibration level(dB(V)) was showed good correlation, but the vibration acceleration and vibration acceleration level was not showed good correlation.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.4
• /
• pp.586-592
• /
• 2016

The current control of Continuous Conduction Mode(CCM) can be implemented by several methods: peak current control; average current control; and hysteresis control. Among these methods, the hysteresis current control is popularly applied in various converter applications because of its simplicity of implementation, fast current control response and inherent peak current limiting capability. However, a current controller with conventional hysteresis band which multiplies the current reference has the disadvantage that the modulation frequency varies in one cycle of the input voltage and, as a result, generates high switching frequency in the low input voltage section. Also it is complicated to design the input filter due to varying switching frequency. This paper proposed an optimum hysteresis-band current control method where the band is generated by using both multiplication method and sum method to maintain the modulation frequency to be nearly constant. This approach can solve the high switching frequency in the low input voltage section, and achieve easy design of input filter. The performance of the proposed converter is verified with the simulation and the experimental works.

• BMB Reports
• /
• v.29 no.1
• /
• pp.38-44
• /
• 1996

Taq DNA polymerase from Thermus aquaticus has been shown to be very useful in the polymerase chain reaction method, which is being used for amplifying DNA. Not only does Taq DNA polymerase have high commercial value commercial value for the polymerase chain reaction application, but it is also important in studying DNA replication, because it is apparently an homologue to E. coli DNA polymerase I, which has long been used for DNA replication study (Lawyer et ai., 1993). The crystal structure determination of Taq DNA polymerase was initiated. An X-ray diffraction pattern breaks down a crystal structure into discrete sine waves in a Fourier series. The original shape of a crystal object in terms of electron density may be represented as the sum of those sine waves with varying amplitudes and phases in three dimensions. The molecular replacement method was initially employed to provide phase information for the structure of Taq DNA polymerase. The rotation search using the program MERLOT resulted in a solution peak with 5.4 r.m.s. PC-refinement of the X-PLOR program verified the result and also optimized the orientation angles. Next, the translation search using the X-PLOR program resulted in a unique solution peak with 7.35 r.m.s. In addition, the translation search indicated $P3_121$ to be the true space group out of two possible ones. The phase information from the molecular replacement was useful in the MIR phasing experiment.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2013.11a
• /
• pp.223-226
• /
• 2013

정확한 움직임 추정 기술은 원본과 가장 유사한 영상의 복원에 효과적이고 압축률에도 중요한 영향을 미친다. 하지만 기존의 전역 탐색 (Full Search) 알고리듬과 Sum of Absolute Difference (SAD)라는 정합 오차 기준은 연산량이 높고 하드웨어 구현시 비효율적이다. 이를 보완하기 위한 1비트 변환 알고리듬은 움직임 벡터의 변화량을 0과 1의 연산으로 나타내는데, 이 알고리듬은 움직임이 많아 픽셀 값의 변화가 심한 블록의 변화량도 0과 1로만 표현한다. 그렇기 때문에 정확한 움직임이 반영되지 않고 그로 인해 낮은 Peak Siganl to Noise Ratio (PSNR)을 가져온다. 이 점을 개선하고자 본 논문에서는 참조블록들의 움직임 벡터를 파악하고 분류하여 선택적으로 움직임의 변화량이 큰 영역은 전역 탐색 알고리듬을, 움직임이 작거나 없는 영역은 1비트 연산을 수행하도록 하여 기존의 알고리듬과 비교하여 Peak Siganl to Noise Ratio (PSNR)측면에서 우수한 성능을 확인할 수 있었다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.5C
• /
• pp.437-443
• /
• 2012

In this paper, we propose a novel unambiguous correlation function for binary offset carrier (BOC) signal acquisition. Specifically, we first find out that the side-peaks arise due to the fact that the BOC autocorrelation is the sum of the irregularly shaped BOC sub-correlations, and then, propose an unambiguous correlation function with no side-peak by combining the sub-correlations. The proposed scheme is shown to remove the side-peaks completely for any type of BOC signal and to provide a better acquisition performance than the conventional correlation functions.

• Journal of Life Science
• /
• v.16 no.2 s.75
• /
• pp.339-344
• /
• 2006

The aim of this study was to examine the timing and magnitude of growth spurt in skinfold, body musle and bone related variables aligned on peak height velocity in boys and girls. In the study design, the subjects and the method were used by the cross-sectional investigation. The subjects participated in this study were 7 through 18 years of age belonged to typical primary, junior, senior high school students, and about 250 males and 250 females in each age group. The total subjects were 2,798 males and 2,762 females. All subjects of this study were lived in Pusan metropolitan city, Korea. The growth velocity magnitudes of sum of the four sites sknfold thickness, body musle and bone related variables. Velocity curve chart of physique was the smoothed according to an approximation of splines by the Sigma Plot-2001 graphic program. In this study, age at PHV of girls occurred eariler about 2 years than boys. In sum of four sites skinfold thickness, PV occurred -2 years from PHV in boys, and PV occurred +2 years from PHV in girls, respectively. In humerus breadth, two PV occurred before and after PHV in boys, whereas PV occurred -1 year from PHV in girls, respectively. In femur breadth, PFV and PHV appeared to occure the same time in boys, PV occurred -2 years from PHV in girls, respectively, In arm circumference, PV occurred after PHV in both sexes. In calf circumference, PV occurred +2 years from PHV in boys, PCCV and PHV appeared to occure the same time in girls, respectively. In magnitudes of peak velocity of body height, humerus breadth, femur breadth, arm circumference and calf circumfence, boys obtained higher than girls, on the other hand, girls obtained higher than boys in sum of four sites skinfold variable. we need to longitudinal and scientific investigation by Korean government level in adolescent growth spurt study, because childhood and adolescence achive higher positive physical education effect than the other ages.

• Korean Journal of Environmental Agriculture
• /
• v.18 no.1
• /
• pp.6-7
• /
• 1999

The water quality at Mankyeong River was surveyed 13 sites of main stream for 6 months from April to September in 1995 and 1997. The monthly average value of $NH_4-N$, $SO_4^{2-}$ and $Cl^-$ showed the highest peak in April while that of $NO_3-N$ showed the highest peak in August. The monthly average value of COD showed the highest peak in September at high temperature season. Concentrations of $NH_4-N$ and $SO_4^{2-}$ in Mankyeong River stream exceeded the standard water quality criteria in many sites. The water quality of Mankyeong River stream was not suitable for the irrigation source excepted the sites such as Hari, Gosan stream and Soyang stream. The floodgate of Mokcheon, Yocheon, Jeonju and Samcheon stream were rapidly polluted by the sewage of city, otherwise the Iksan stream was rapidly polluted by the sewage of swine. The sum of ionic concentrations in Mankyeong River stream was the highest at floodgate of Yocheon by influence of the sewage from city and industry. The order of the major anions and cations concentration in Mankyeong River stream were $SO_4^{2-}$ > $Cl^-$ > $NO_3-N$ > $SO_4^{3-}$ and $Na^+$ > $Ca^{2+}$ > $NH_4^+$ > $Mg^{2+}$ > $K^+$, respectively.