• Journal of Acupuncture Research
• /
• v.17 no.4
• /
• pp.149-159
• /
• 2000

Bee-venom Acupucture has good effect on pain control but We may be anxious about the problem of side-effect. Bee-venom components are composed of phospholipase $A_2$, hyaluronidase, melitin, apamin, MCD peptide, citrate and so on. Especially Apamin, MCD peptide and histamine cause severe reacting that is named Anaphylaxis. Anaphylaxis is a clinical syndrome characterized by the acute system reaction of multiple organ systems to an IgE-mediated immunologic mediator release in previously sensitized individuals. Respiratory and dermatologic manifestations are the most commonly expressed clinical features of anaphylaxis, and a majority of anaphylactic reactions initially appear to be localized to these two systems. Anaphylatic reaction of bee-venom are expressed clinically ulticaria, itching sensation, erythema, dizziness, nausea, hypotension and so on. Especially ulticaria and erythema are end points of increased vascular permeability and vasodilatation at the other extreme of the clinical spectrum, Gastrointestinal mucosal edema and smooth muscle contraction can result in cramping abdominal pain, nausea, and vomiting. Therefore, we have observed anaphylatic reaction of bee-venom in 11 patients, who visited WonKwang University Kunpo Oriental Medical Center, treated bee venom. The results were summarized as follows : 1. The patient distribution ratio, in regard to sex, was shown to be 1 : 2.67 for male to females. In regard to age, it was shown that people in their 30's was the most predominant case, followed by people in their 20's, 30's, 50's and 60's, respectively. 2. When Anaphylaxis was occured, it was observed to abnormality of CBC, LFT, IgE, IgG. 3. In regard to patient condition, it was observed that fatigue was most frequent. 4. In regard to the number of times and quantity of bee venom inj., it was observed that anaphylaxis is most frequent at 7-10 times(1.6-2.0cc) 5. In regard to duration of reaction, it was observed that people in their l0min' was most frequent. In disappearing duration of anaphylaxic reaction, The results showed under 60min lcases(9%), 60-120min 7cases(64%) and 180-240min 3cases(27%). 6. In symptoms of anaphylaxis, The results showed hypotension 8cases(19%), itching sensation 7cases(16%), nausea 4cases(9%), erythema 4cases(9%) and dizziness 4cases(9%). In mentality, The results showed drowsy 8case(73%) and alert 3cases(27%). 7. Generally, patients were treated with Avil, Dexa IM and PDS, peniramine, cimetidine, Q-zyme per os after H/S, N/S inj. $O_2$ was supplied according to patient's symptom. In 1 severe case, Dopamine was iv injected.

• Journal of the Korean Arthroscopy Society
• /
• v.10 no.1
• /
• pp.118-122
• /
• 2006

Purpose: We introduce a technique of all inside arthroscopic capsular imbrication and lateral release used to treat patellofemoral instability. Methods: With the arthroscope in the anteromedial portal for best viewing, the arthroscopic scissor is placed through superolateral portal for proximal to distal release. The release performed 5mm to 1cm from the edge of the patella. After completion of the procedure, with the arthroscope in anterolateral portal, we inserted 5mm cannula in superolateral portal and made working portal from superomedial portal. Medial reefing was performed with all inside technique by using curved needle of the spectrum suturing system and No. 1 monofilament PDS suture is passed through the superomedial portal percutaneously and retrieved through a superolateral portal. Conclusion: Several methods for arthroscopic patella realignment have been proposed, but they have consisted primarily of arthroscopically assisted techniques using a medial incision. We believe that our procedure is preferable to arthroscopically assisted methods commonly used, in that an incision is avoided and the vastus medialis obliqqus is not violated. Our technique is minimally invasive and is easy to control the tightness of the medial patellofemoral ligament (MPFL) under direct vision.

• Journal of Plant Biotechnology
• /
• v.44 no.1
• /
• pp.82-88
• /
• 2017

Transgenic lily plants have been obtained after particle bombardment, using PDS-1000/He system and scale explants of lilies, followed by PPT (D-L-phosphinothricin) selection. In this study, scales of the lily plants cv. 'red flame' were bombarded with a plasmid containing the bar gene as a selectable marker, and the AtSIZ gene as a gene of interest, showing salt tolerance and drought tolerance respectively, and both being driven by the CaMV 35S promoter. For optimization of a protocol, factors which optimized and showed a high transformation efficiency under following conditions, were considered: a bombardment pressure of 1100 psi, a target distance of 6 cm and $1.0{\mu}m$ of gold particle, and 24-h pre-culture and post-culture on MS medium containing 0.2 M sorbitol and 0.2 M mannitol as osmoticum agents. After bombardment, all the bombarded scales of lily were transferred to MS medium without selective agents, for a week. Subsequently, these bombarded scales were transferred to a selection MS medium containing 10 mg/l PPT, and incubated for a month for further selection, after which they were cultured for another 4-8 weeks with a 4-week subculture regime on the same selection medium. After transferring into hormone-free MS medium, the PPT-resistant scales with shoots were successfully rooted and regenerated into plantlets. PCR analysis revealed that the surviving putatively transformed plantlets indicated the presence of both the bar gene and the AtSIZ gene. In conclusion, when 100 scales of lily cv. Red flame are bombarded, this study produced approximately 17-18 transgenic plantlets with an optimized bombardment protocol. The protocol described here can contribute to the breeding program of lilies.

• Archives of Plastic Surgery
• /
• v.37 no.5
• /
• pp.650-658
• /
• 2010

Purpose: In the case of repair for far distal parts of FDP (Flexor digitorum profundus) division, the method of either pull-out suture or fixation of tendon to the distal phalanx is preferred. In this paper, the results of a modified loop suture technique used for the complete division of FDP from both zone 1a and distal parts of zone 1b in Moiemen classification are presented. Methods: From July 2006 to July 2009, the modified loop suture technique was used for the 10 cases of FDP in complete division from zone 1a and distal parts of zone 1b, especially where insertion sites were less than 1 cm apart from a tendon of a stump. In a suture technique, a loop is applied to each distal and proximal parts of tendon respectively. Core suture of 2-strand and epitendinous suture are done with PDS 4-0. Out of 10 patients, the study was done on 6 patients who were available for the followup. The average age of the patients was 49.1 years (in the range from 26 to 67). 5 males and 1 female patients were involved in this study. There were 3 cases with zone 1a and distal parts of zone 1b. The average distance to the distal tendon end was 0.6 cm. There were 5 cases underwent microsurgical repair where both artery and nerve divided. One case of only tendon displacement was presented. The dorsal protective splint was kept for 5 weeks on average. The results of the following tests were measured: active & passive range of motion, grip strength test, key pinch and pulp pinch test. Results: The follow-up period on average was 11 months, in the range from 2 to 20 months. There was no case of re-rupture, but tenolysis was performed in 1 cases. In all 6 cases, the average active range of motion of distal interphalangeal joint was 50.8 degree. The grip strength (ipsilateral/contralateral) was measured as 88.7% and the pulp pinch test was 79.2% as those of contralateral side. Flexion contracture was presented in 2 cases (15 degree on average) and there was no quadrigia effect found. Conclusion: Despite short length of tendon from the insertion site in FDS rupture in zone 1a and distal parts of zone 1b, sufficient functional recovery could be expected with the tendon to tendon repair using the modified loop suture technique.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.1
• /
• pp.85-95
• /
• 2017

This study aimed at more precisely estimating the age of big old trees using dendrochronological method. Gesan-gun in Chungbuk (CBGS), Gurye-gun in Jeonnam (JNGR) and Uljin-gun in Gyeongbuk (GBUJ) were study areas and Zelkova serrata (ZS) and Pinus densiflora (PD) selected as protected trees therein were used as experimental tree species. The increment cores were extracted from 12, 8, and 6 ZSs and 10, 3, and 9 PDs in CBGS, JNGR, and GBUJ, respectively, using an increment borer (${\phi}5.2mm$). In order to clearly distinguish tree-ring boundary, the surface in the transverse section was cut for ZS using a sliding microtome and sanded for PD using a sand paper. Ring widths were measured in the resolution of 0.01 mm. Based on the measurement values, 203-year long (1813-2015) ZS local master tree-ring chronologies were successfully established and 175-year long (1841-2015) ZS local master tree-ring chronology for JNGR was also successfully established. In the case of PD, 154-, 175-, and 250-year long local master tree-ring chronologies for CBGS, JNGR, and GBUJ were successfully established, respectively. In the comparisons between local master tree-ring chronologies, they showed low t-values and Glks. According to the comparisons of the local master tree-ring chronologies with 50-year (1950~2000) average temperature and precipitation distribution maps, the annual variations of local master tree-ring chronologies seem to be determined by not temperature but precipitation. For such cross-dating therefore more local master tree-ring chronologies have to be established at the least based on the distribution map for precipitation.

• The Korean Journal of Mycology
• /
• v.9 no.3
• /
• pp.123-128
• /
• 1981

Three edible species, e.g. Lyophyllum sp. and Armillaria mellea introduced from Japan in 1979 and Auriaularia auricula-judae from Taiwan in 1978 were selected for artifcial cultivation. The media, MSDS for Lyophyllum sp, MHS and PDS for A. auricula-judae, and MSDS and MHS for A. mellea were selected. The range of optimum pH of Lyophyllum sp. was 6.0 and pH 8.0 for A. auricula-judae and pH 6.0 to 7.0 for A. mellea. The range of optimum temperature for the mycelial growth of Lyophyllum sp. was 25 to $30^{\circ}C,\;30^{\circ}C$ for A. auricula-judae and $25^{\circ}C$ for A. mellea. When the moisture content 75 to 80% (w/w) in the substrates, the mycelial growth of Lyophyllum sp. and A. auricula-judae, was rapid. 65% (w/w) for A. mellea. As the spawning substrates, wheat for Lyophyllum sp. oak sawdust for A. auricula-judae and poplar sawdust for A. mellea were selected, respectively. In this experiment, yields of Lyophyllum sp. and A. auricula-judae were high on the poplar sawdust added 20% (w/w) of rice bran. Lyophyllum sp. and A. auricula-judae for sources of new edible mushrooms seems to be possible.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.3
• /
• pp.147-154
• /
• 2018

This paper focuses on the development of a support system that can rapidly generate the design data of a hot-form die with cooling channels, commonly known as hot stamping technology. We propose a new process for designing hot-form dies based on our (automated) system, whose main features are derived from the analysis of the design requirements and design process in the current industry. Our design support system consists of two modules, which allow for the generation of a 3D geometry model and its 2D drawings. The module for 3D modeling automation is implemented as a type of CATIA template model based on CATIA V5 Knowledgeware. This module automatically creates a 3D model of a hot-form die, including the cooling channels, that depends on the shape of the forming surface and the number of STEELs (subsets of die product) and cooling channels. It also allows for both the editing of the positions and orientations of the cooling channels and testing for the purpose of satisfying the constraints on the distance between the forming surface and cooling channels. Another module for the auto-generation of the 2D drawings is being developed as a plug-in using CAA (CATIA SDK) and Visual C++. Our system was evaluated using the S/W test based on a user defined scenario. As a result, it was shown that it can generate a 3D model of a hot form die and its 2D drawings with hole tables about 29 times faster than the conventional manual method without any design errors.

• Development and Reproduction
• /
• v.15 no.2
• /
• pp.143-150
• /
• 2011

The objective of this study was to determine the effect of exercise on a hemiparkinsonian rat model. Nigrostriatal dopamine cell lesions were produced by injecting 6-hydroxydopamine at the left medial forebrain bundle of rats. In this study, the rats were divided into the following 4 groups: the control group without any exercise, experimental group I with aqua-exercise (Exp I), experimental group II with balance exercise (Exp II) and experimental group III with complex exercise (aqua-exercise+balance exercise; (Exp III)). Exercises were applied to all the experimental groups after the operation. In order to observe the dopaminergic cell loss, we assessed the level of tyrosine hydroxylase (TH) expression in the midbrain of rats, and performed the apomorphine-induced rotation test at postoperative days (PDs) 7, 14, and 21. Experimental groups had significantly higher TH-immunoreactivity and behavioral performance than the control group. However, there was no difference in TH-immunoreactivity and behavioral performance across the experimental groups. These results suggest that the application of aqua-exercise and balance exercise could suppress dopaminergic cell loss in the substantia nigra of rat brains and could increase behavioral recovery in hemiparkinsonian rats.

• Journal of Technologic Dentistry
• /
• v.36 no.3
• /
• pp.141-147
• /
• 2014

Purpose: Dental casting #Gr I (Co-25Cr-5Mo-3Sn-1Mn-1Si), #Gr II (Co-25Cr-5Mo-5Cu-1Mn -1Si) and #Gr III (Co-25Cr-5Mo-3Sn-5Cu-1Mn-1Si) master alloys of granule type were manufactured the same as manufacturing processes for dental casting Ni-Cr and Co-Cr-Mo based alloys of ingot type. These alloys were analyzed melting processes with heating time of high frequency induction centrifugal casting machine using infrared thermal image analyzer. Methods: These alloys were manufactured such as; alloy design, the first master alloy manufatured using vacuum arc casting machine, melting metal setting in crucible, melting in VIM, pouring in the mold of bar type, cutting the gate and runner bar and polishing. These alloys were put about 30g/charge in the ceramic crucible of high frequency induction centrifugal casting machine and heat, Infrared thermal image analyzer indicated alloys in the crucible were set and operated. Results: The melting temperatures of these alloys measuring infrared thermal image analyzer were decreased in comparison with remanium$^{(R)}$ GM 800+, vera PDI$^{TM}$, Biosil$^{(R)}$ f, WISIL$^{(R)}$ M type V, Ticonium 2000 alloys of ingot type and vera PDS$^{TM}$(Aabadent, USA), Regalloy alloys of shot type. Conclusion: Co-Cr-Mo based alloy in addition to Sn(#Gr I alloy) were decreased the melting temperature with heating time of high frequency induction centrifugal casting machine using infrared thermal image analyzer.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.7
• /
• pp.645-653
• /
• 2017

In bone tissue engineering, polycaprolactone (PCL) is one of the most widely used biomaterials in the manufacturing of scaffolds as a synthetic polymer having biodegradability and biocompatibility. The strut width in the fabrication of scaffolds is an important part of tissue regeneration in in-vitro and in-vivo experiments, because it affects not only the pore size but also the porosity. In this study, we used polymer deposition system (PDS) and design of experiments (DOE) to explore the optimal process conditions to achieve a systematic and efficient scaffold manufacturing process, using temperature, pressure, scan velocity, and nozzle tip height as the parameters for the experiments. The aim of this research was to fabricate a 3D PCL scaffold having a uniform strut width of $150{\mu}m$ using DOE; it was proved that the strut width was constant in all the experimental groups by fabricating the PCL scaffolds according to various pore patterns as well as one pore pattern.