• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 C
• /
• pp.1766-1768
• /
• 2004

This paper describes the prediction of location of PD signals in GIS using the difference in the measured time between first and second wave arrival by the external-type PD sensors. It is well accepted that the electromagnetic wave in GIS propagates at the velocity of $3{\times}10^8$m/s. Consequently, we could identify the location of PD with high accuracy. The experience at the fields and the problems for the judgment are also discussed in detail.

• 한국자기학회지
• /
• 제3권4호
• /
• pp.298-304
• /
• 1993

Pd/Co 다층박막을 동시열증착장치로 제작하여, 토오크 자력계, 홀 효과 측정장치 및 X-선 회절기를 이용하여 기판 온도, Pd하지층에 따른 구조적 자기적 및 열적 특성변화를 연구하였다. 기판 온도가 증가함에 따라 $150^{\circ}C$까지는 계면구조 및 각 층의 결정성이 향상되고, (111) 집합조직이 발달되었으며 따라서 계면자기이방성 및 수직자기 이방성에너지는 증가하였다. 그러나 보자력은 감소 하였는데 이는 입자의 성장으로 인한 자구벽 고착효과 감소에 기인된 것으로 보이며 Pd하지층이 두꺼 울 수록 다층박막의 입자크기는 컸다. $200^{\circ}C$ 이상에서는 계면에서 상호확산에 의하여 다층막의 구조의 열화는 촉진되었다. 열처리 초기에 주 피이크 강도의 변화는 컸으며 그 후부터는 작은 폭으로 감소하였다. 초기의 큰 강도 변화는 구조이완등의 현상에 기인된 것으로 추측되며 그 후는 확산에 의 해서이다. 다층박막의 상호확산에 필요한 활성화 에너지는 14.9 KCal/mole.K 였다.

• Journal of Electrochemical Science and Technology
• /
• 제1권1호
• /
• pp.31-38
• /
• 2010

In this study, we have demonstrated the fine structure effect of PdCo electrocatalyst on oxygen reduction reaction activity with different alloy composition and heat-treatment time. In order to identify the intrinsic factors for the electrocatalytic activity, various X-ray analyses were used, including inductively coupled plasma-atomic emission spectrometer, transmission electron microscopy, X-ray diffractometer, and X-ray Absorption Spectroscopy technique. In particular, extended X-ray absorption fine structure was employed to extract the structural parameters required for understanding the atomic distribution and alloying extent, and to identify the corresponding simulated structures by using FEFF8 code and IFEFFIT software. The electrocatalytic activity of PdCo alloy nanoparticles for the oxygen reduction reaction was evaluated by using rotating disk electrode technique and correlated to the change in structural parameters. We have found that Pd-rich surface was formed on the Co core with increasing heating time over 5 hours. Such core shell structure of PdCo/C showed that a superior oxygen reduction reaction activity than pure Pd/C or alloy phase of PdCo/C electrocatalysts, because the adsorption energy of adsorbates was apparently reduced by lowering the dband center of the Pd skin due to a combination of the compressive strain effect and ligand effect.

• 한국자기학회지
• /
• 제11권3호
• /
• pp.109-113
• /
• 2001

Presently, an inductor adapted at MMIC (Monolithic Microwave Integrated Circuit) which is used for cellular phone or PHS operates at quasi-microwave range over 800 MHz. However, a W-CDMA (Wideband Code Division Multiple Access) will use about 2 GHz range. Therefore magnetic film device should be compatible up to 2 GHz. We have deposited Co-Pd-Al-O system film using rf sputtering method which is expected up to 2 GHz, and investigated the effect of Pd content and magnetic field annealing. When Pd composition is 19%, Hk was 118 Oe, and ${\mu}$′showed flat frequency characteristics up to 1.5 GHz. The Q factor (=${\mu}$′/${\mu}$") was 23.3 at 1 GHz, 6.7 at 1.5 GHz and 1.5 at 2 GHz, respectively. Resonance frequency was 2 GHz. Therefore Co-Pd-Al-O thin film could be used at over 1 GHz, and also expected as an inductor material for wide band CDMA type cellular phone.

• 한국자기학회지
• /
• 제23권1호
• /
• pp.7-11
• /
• 2013

본 연구에서는 $TiO_2$/Co/Pd 구조의 다층박막을 마그네트론 스퍼터링으로 GaAs(100), MgO(100), MgO(111), Si(100), glass와 같은 다양한 종류의 기판에 대해 제작하여 수직 자기 이방성에 대해서 연구하였다. 산소 분압 등의 $TiO_2$ 층의 증착 조건과 기판의 종류에 따른 Co/Pd 층의 수직 자기 이방성을 측정하였다. 그 결과, $TiO_2$ 층이 5 nm 이하 일 때는 기판의 종류에 영향을 받지만, 그 이상의 두께에 대해서는 MgO(111)을 제외한 기판의 영향이 크지 않음을 확인하였고, 이는 $TiO_2$ 씨앗층의 성장조건과 계면의 거칠기, 결정방향 등과 관련이 있음을 발견하였다.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2002년도 동계연구발표회 논문개요집
• /
• pp.196-197
• /
• 2002

보편적으로 알려진 CoCr합금 수직기록매체의 경우, 기록매체에서 출력되는 신호의 크기가 작고 열적안정성이 떨어지는 문제점이 있다. 이러한 CoCr합금 수직기록매체를 대체할 기록 매체로 Co/Pd 다층박막에 관한 연구를 수행하였다. Co/Pt 및 Co/Pd계 다층박막은 수직배향성을 가지며 일찍부터 Magneto-optical 매체로 연구되었다. Co/Pd 다층박막은 자성재료와 비자성재료를 약 2~3개 원자층의 박막 두께(10$\AA$이하)로 번갈아 가며 진공증착한 것으로. CoCr합금계 수직기록매체에 비해 열적안정성이 뛰어나고 수직방향의 잔류 자화가 큰 장점을 가지고 있다. (중략)

• 대한치과보철학회지
• /
• 제27권1호
• /
• pp.143-179
• /
• 1989

To observe the bonding behavior of palladium-based alloys to porcelain; 1. Pd-Co binary alloy with the higher cobalt content, 2. Pd-Co binary alloy with the lower cobalt content, 3. Pd-Ag-Sn ternary alloy, 4. Pd-Ag binary alloy, 5. Pd-Cu-Au ternary alloy and 6. Pd-Cu binary alloy were made as 6 groups of experimental alloys. Each group of alloy was divided into 4 sub-groups such as one sub-group that was not degassed and three sub-groups that degassed for 5 minutes, 10 minutes and 15 minutes. On each specimen, weight changes after degassing, morphological changes of oxide layer by changing the degassing time, compositional changes at metal-ceramic interface and bond strength of metal-ceramic measured with planar shear test were observed and compared. The results of the present study allow the following conclusions to be drawn: 1. The alloy showing the greatest bond strength was Pd-Cu alloy without gold and bond strength was decreased by alloying gold to them. 2. Although Pd-Co alloy showed the most prominent oxidation behavior, bond strength of them to porcelain was not greatly high by the formation of porosities at metal-ceramic interfaces. 3. Likewise tin, cobalt formed the peaks on line profiles at metal-ceramic interface, however copper did not exhibit such peaks on line profiles. 4. Mainly, oxide layer on Pd-Co alloy was composed with cobalt, and for Pd-Co alloy with higher cobalt content the rise of bond strength was not significant by increased degassing time. 5. On Pd-Ag alloy not containing tin, during degassing for 15 minutes silver content was increased at metal-ceramic interface. 6. As an oxidized element, tin formed the oxide layers that widen their area by increasing the degassing time, while cobalt and copper showed the morphological changes of particle or crystal on oxide layer.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 1991년도 추계연구발표회 논문개요집
• /
• pp.96-97
• /
• 1991

• Journal of Magnetics
• /
• 제3권1호
• /
• pp.21-30
• /
• 1998

An artificially modulated magnetic Co/Pd multilayer is one of the promising candidates for high density magneto-optic (MO) recording media, due to large Kerr rotation angle in the wavelength of a blue laser beam. however, since multilayer structure, as well as amorphous structure, is a non-equilibrium state in terms of free energy and MO recording is a kind of thermal recording which is conducted aound Curie temperature (Tc) of the recording media, when the multilayer is used for the MO recording media, changes in the multilayer structure are occurred as the amorphous structure do. Therefore, the assessment of the structural stability in the Co/Pd multilayer is crucially important both for basic research and applications. As the parameter of the structural stability in this research, modulation amplitude and particle size of the Co/Pd multilayer are measured in terms of Ar sputtering pressure and heat treatment temperature. From the results of the research, we find out that the magnetic exchange energy in the structural changes of a magnetic multilayer structure and suggest the operating temperature range for MO recording in the Co/Pd multilayer for the basic research and applications, respectively.

• 한국자기학회지
• /
• 제26권3호
• /
• pp.76-80
• /
• 2016

CoSiB은 비정질 구조를 갖는 강자성체 물질이며, CoSiB과 Pd을 포함한 다층박막은 수직자기이방성을 갖는다. 수직자기이방성은 수평자기이방성에 비해 STT-MRAM에 적용되기에 좋은 이점이 있으며, 특히 비정질 강자성체를 포함한 다층박막은 결정질강자성체를 포함한 다층박막과 비교하여 몇 가지 이점을 지니는데, 첫째는 grain boundary가 없다는 것이며 둘째는 결정질 재료에 비교하여 열적안정성이 보다 좋다는 것이다. 이러한 이유에 따라 우리는 비정질 강자성체 $Co_{75}Si_{15}B_{10}$을 포함하는 다층박막을 제작하여 그 자기적 특성을 연구하였다. 본 연구는 [CoSiB(3, 4, 5, 6) ${\AA}$/Pd(11, 13, 15, 17, 19, 24${\AA})]_5$ 다층박막을 제작하여 VSM 측정을 통해 두께에 따른 그 자기적 특성의 변화를 살펴보았으며, 이후 일부 다층박막의 열처리를 통해 온도에 따른 자기적 특성의 변화추이를 조사하였다. 포화자화값과 보자력은 CoSiB과 Pd 각 층의 두께 변화에 따라 증가와 감소를 반복하였으며, 열처리 온도의 범위는 상온에서 $500^{\circ}C$까지로 특정 온도에서 보자력의 증대를 보였다.