• 제목/요약/키워드: Pd(0)

검색결과 1,118건 처리시간 0.037초

부분방전 신호 분석을 위한 퍼지 알고리즘 적용 및 평가에 관한 연구 (A Study on the PD Signal Analysis with Applied Fuzzy Algorithm)

  • 김용갑;김진수
    • 대한전기학회논문지:전기물성ㆍ응용부문C
    • /
    • 제55권4호
    • /
    • pp.166-171
    • /
    • 2006
  • In this paper, we have studied for analysis of the partial discharge(PD) signal in underground transmission line. The PD signal has estimated as detected signal accumulation of a PRPDA method by using Labview, and analyzed with fuzzy algorithm. In our algorithm, we developed system configuration that detected accumulating PD signal using by Labview and programmed fuzzy algorithm can be analyzed the PD signal using with Matlab. With practical PD logic implementation of theoretical detected system and hardware implementation, the device for Hipotronics Company's 50kV setup has generated and then has applied with $15k{\sim}17kV$ with 1:1 time probe. It's also used the LDPE 0.27mmt (scratch error 0.05mmt) to sample for making PD. In conclusion, Our new class of PD detected algorithm has also compared with previous PRPDA or Fuzzy algorithm. which has diagnose more conveniently by adding numerical values.

Interfacial disruption effect on multilayer-films/GaN : Comparative study of Pd/Ni and Ni/Pd films

  • 김종호;강희재;김차연;전용석;서재명
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2000년도 제18회 학술발표회 논문개요집
    • /
    • pp.113-113
    • /
    • 2000
  • 직접천이형 wide band gap(3.4eV) 반도체중의 하나인 GaN를 청색 및 자외선 laser diode, 고출력 전자장비 등으로 응용하기 위해서는 낮은 접합저항을 갖는 Ohmic contact이 선행되어야 한다. 그러나 만족할만한 p-type GaN의 Ohmic contact은 아직 실현되고 있지 못하며, 이는 GaN와 접합 금속과의 구체적인 반응의 연구를 필요로 한다. 본 연구에서 앞서 Pt, Pt, Ni등의 late transition metal을 p-GaN에 접합시킨 결과 이들은 접합 당시 비교적 평탄하나 후열 처리과정에서 비교적 낮은 온도에서 기판과 열팽창계수의 차이로 인하여 평탄성을 잃어버리면서 barrier height가 증가한다는 사실을 확인하였다. 따라서 본 연구에서는 이러한 열적 불안정성을 극복하기 위하여 Ni과 Pd를 차례로 증착하고 가열하면서 interfacial reaction, film morphology, Fermi level의 움직임을 monchromatic XPS(x-ray photoelectron spectroscopy) 와 SAM(scanning Auger microscopy) 그리고 ex-situ AFM을 이용하여 밝히고자 하였다. 특히 후열처리에 의한 계면 반응에 수반되는 구성 금속원소 간의 합금현상과 금속 층의 평탄성이 밀접한 관계가 있다는 것을 확인하였다. 이러한 합금과정에서 나타나는 금속원소들의 중심 준위의 이동을 체계적으로 규명하기 위해서 Pd1-xNix와 Pd1-xGax 합금들의 표준시료를 arc melting method로 만들어 농도에 따른 금속원소들의 중심 준위의 이동을 측정하여, Pd/Ni/p-GaN 및 Ni/Pd/p-GaN 계에서 열처리 온도에 따른 interfacial reaction을 확인하였다. 그 결과 두 계가 상온에서 nitride 및 alloy를 형성하지 않고 고르게 증착되고, 열처리 온도를 40$0^{\circ}C$에서 $650^{\circ}C$까지 증가시킴에 따라 계면반응의 부산물인 metallic Ga은 증가하고 있으마 nitride는 여전히 형성되지 않는 것을 확인하였다. 증착당시 Ni이 계면에 있는 Pd/Ni/p-GaN의 경우에는 52$0^{\circ}C$까지의 열처리에 의하여 Ni과 Pd가 골고루 섞이고 그 평탄성도 유지되고 barier height의 변화도 없었다. 더 높은 $650^{\circ}C$ 가열에 의해서는 surface free energy가 작은 Ga의 활발한 편석 현상으로 인해 표면은 Ga이 풍부한 Pd-Ga의 합금층으로 덮이고, 동시에 작은 pinhole들이 발생하며 barrier height도 0.3eV 가량 증가하게 된다. 반면에 증착당시 Pd이 계면에 있는 Ni/Pd/p-GaN의 경우에는 40$0^{\circ}C$의 가열까지는 두 금속이 그들 계면에서부터 섞이나, 52$0^{\circ}C$의 가열에 의해 이미 barrier height가 0.2eV 가량 증가하기 시작하였다. 더 높은 $650^{\circ}C$가열에 의해서는 커다란 pinhole, 0.5eV 가량의 barrier height 증가, Pd clustering이 동시에 관찰되었다. 따라서 Ni과 Pd의 일함수는 물론 thermal expansion coefficient가 거의 같으며 surface free energy도 거의 일치한다는 점을 감안하면, 이렇게 뚜렷한 열적 안정성의 차이는 GaN와 contact metal과의 반응시작 온도(disruption onset temperature)의 차이에 기인함을 알 수 있었다. 즉 계면에서의 반응에 의해 편석되는 Ga에 의해 박막의 strain이 이완되면, pinhole 등의 박막결함이 줄어 들고, 이는 계면의 N의 out-diffusion을 방지하여 p-type GaN의 barrier height 증가를 막게 된다.

  • PDF

The Effect of the Ceramic Precipitates on the Hydrogen Solubility in Pd Alloys

  • Koh, Je Mann;Lee, Kil Hong;Baek, Seung Nam;Noh, Hak
    • 한국수소및신에너지학회논문집
    • /
    • 제10권2호
    • /
    • pp.101-106
    • /
    • 1999
  • Hydrogen solubility in internally oxidized Pd-Mo(Al) alloys has been studied at 323 K from the measurements of pressure-composition(p-c) isotherms. Internal oxidation of $Pd_{0.985}Al_{0.015}$ and $Pd_{0.97}Mo_{0.03}$ alloys results in the precipitation of Al and Mo particles in a matrix of pure Pd. It has been observed that the presence of the aluminum and molybdenum oxide precipitates results in an enhanced hydrogen solubility in the dilute phase region of Pd-H in a Pd/aluminum(molybdenum)oxide composites. Hydrogen solubility enhancements due to the presence of residual stresses around ceramic particles have been observed from p-c isotherms determined at 323 K after oxidation at 1073 K. The solubility enhancements in completely internally oxidized alloys are greater than that in partially oxidized alloys. The stress fields near the ceramic precipitates are the major source of the solubility enhancements. Transmission electron microscopy indicates that alumina precipitates are nanometer-sized and coherent with the Pd matrix after oxidation.

  • PDF

T-Cell Immunoglobulin Mucin 3 Expression on Tumor Infiltrating Lymphocytes as a Positive Prognosticator in Triple-Negative Breast Cancer

  • Byun, Kyung Do;Hwang, Hyo Jun;Park, Ki Jae;Kim, Min Chan;Cho, Se Heon;Ju, Mi Ha;Lee, Jin Hwa;Jeong, Jin Sook
    • Journal of Breast Cancer
    • /
    • 제21권4호
    • /
    • pp.406-414
    • /
    • 2018
  • Purpose: T-cell immunoglobulin and mucin domain-containing molecule 3 (TIM-3) is an emerging immune response molecule related to T-cell anergy. There has been tremendous interest in breast cancer targeting immune checkpoint molecules, especially in the triple-negative breast cancer (TNBC). This study was designed to investigate TIM-3 expression on tumor infiltrating lymphocytes (TILs), its relationships with clinicopathological parameters and expression of programmed death receptor 1 (PD-1)/programmed death receptor ligand 1 (PD-L1), and its prognostic role. Methods: Immunohistochemistry on tissue microarray blocks produced from 109 samples of invasive ductal carcinoma type TNBC was performed with antibodies toward TIM-3, PD-1, PD-L1 and breast cancer-related molecular markers. Associations between their expression and clinicopathological parameters as well as survival analyses were performed. Results: TIM-3 was expressed in TILs from all 109 TNBCs, consisting of 17 cases (<5%), 31 cases (6%-25%), 48 cases (26%-50%), and 13 cases (>51%). High TIM-3 was significantly correlated with younger patients (p=0.0101), high TILs (p=0.0029), high tumor stage (p=0.0018), high PD-1 (p=0.0001) and high PD-L1 (p=0.0019), and tended to be associated with higher histologic grade, absence of extensive in situ components and microcalcification. High TIM-3 expression was significantly associated with a combinational immunophenotype group of high PD-L1 and high PD-1 (p<0.0001). High TIM-3 demonstrated a significantly better disease-free survival (DFS) (p<0.0001) and longer overall survival (OS) (p=0.0001), together with high TILs and high PD-1. In univariate survival analysis, high TIM-3 showed reduced relapse risk (p<0.0001) and longer OS (p=0.0003), together with high PD-1 expression. In multivariate analysis, high TIM-3 was statistically significant in predicting prognosis, showing better DFS (hazard ratio [HR], 0.0994; 95% confidence interval [CI], 0.0296-0.3337; p=0.0002) and longer OS (HR, 0.1109; 95% CI, 0.0314-0.3912; p=0.0006). Conclusion: In this study, we demonstrate that TIM-3 expression is an independent positive prognostic factor in TNBC, despite its association with poor clinical and pathologic features.

수소흡수시 Pd 박막 시료의 두께 변화에 따른 전기저항의 변화 (Change of Electrical Resistivity of PdH film as a Function of Film Thickness)

  • 조영신
    • 한국수소및신에너지학회논문집
    • /
    • 제10권3호
    • /
    • pp.171-175
    • /
    • 1999
  • 진공 증착 방법으로 제작한 Pd박막(두께 $180{\sim}670{\AA}$)에 상온에서 수소기체를 흡수-방출시킬 때의 전기저항값의 변화를 측정하였다. 저항값 변화의 최대값은 시료의 두께에 따라서 달라졌다. $({\Delta}R_{\infty}/R_0)_{{\beta}min}$ 값은 $\670{\AA}$ 시료는 0.61이었으며, $\180{\AA}$ 시료는 0.34 이었다. 같은 두께의 시료일 경우 시료의 제작 조건에 따라 저항값의 변화는 다른 경향을 보였다.

  • PDF

LLE and SLM studies for Pd(II) separation using a thiodiglycolamide-based ligand

  • Kumbhaj, Shweta;Prabhu, Vandana;Patwardhan, Anand V.
    • Membrane and Water Treatment
    • /
    • 제9권6호
    • /
    • pp.463-471
    • /
    • 2018
  • The present paper deals with the liquid-liquid extraction and flat sheet supported liquid membrane studies of Pd(II) separation from nitric acid medium using a novel synthesized ligand, namely, N,N,N',N'-tetraethyl-2,2-thiodiethanthiodiglycolamide (TETEDGA). The effect of various diluents and stripping reagents on the extraction of Pd(II) was studied. The liquid-liquid extraction studies showed complete extraction of Pd(II) in ~ 5 min. The influence of nitric acid and TETEDGA concentration on the distribution of Pd(II) has been investigated. The increase in nitric acid concentration resulted in increase in extraction of Pd(II). Stoichiometry of the extracted species was found to be $Pd(NO_3)_2{\cdot}TETEDGA$ by slope analysis method. Extraction studies with SSCD solution showed negligible uptake of Pt, Cr, Ni, and Fe, thus showing very high selectivity and extractability of TETEDGA for Pd(II). The flat sheet supported liquid membrane studies showed quantitative transport of Pd(II), ~99%, from the feed ($3M\;HNO_3$) to the strippant (0.02 M thiourea diluted in $0.4M\;HNO_3$) using 0.01 M TETEDGA as a carrier diluted in n-dodecane. Extraction time was ~160 min. Parameters such as feed acidity, TETEDGA concentration in membrane phase, membrane porosity etc. were optimized to achieve maximum transport rate. Permeability coefficient value of $2.66{\times}10^{-3}cm/s$ was observed using TETEDGA (0.01 M) as carrier, at 3 M, $HNO_3$ feed acidity across $0.2{\mu}m$ PTFE as membrane. The membrane was found to be stable over five runs of the operation.

광전자분광법을 이용한 Pd-실리사이드의 형성 연구 (Study of the formation of Pd-silicide with x-ray photoelectron spectroscopy)

  • 조은진;최일상;이한길;황찬용
    • 한국진공학회지
    • /
    • 제6권2호
    • /
    • pp.165-171
    • /
    • 1997
  • Pd금속을 9$\AA$보다 많은 양을 Si표면에 증착한 경우에 형성되는 Pd-실리사이드는 순 수한 Pd금속이 쌓이기 전단계인 Pd양이 많은 $Pd_3Si$상이다. 또한, Si표면에 Pd금속을 1$\AA$이 상을 증착 하였을 때 형성되는 Pd-실리사이드는 $Pd_2Si$상이다. 그리고, Si표면에 Pd금속을 1 $\AA$보다 작은 양을 증착한 Pd 3d 내각준위의 분광을 보면, Pd의 증착 두께가 얇아질수록 Pd 3d 내각준위의 반높이에서 반너비(half width at half maximum:HWHM)의 크기가 넓어진 다. 매우 작은 양의 Pd금속을 Si표면에 증착한 경우에 반너비가 넓어진 이유는 많은 연구자 들이 찾아낸 Pd-실리사이드인 $Pd_2Si$상외에 Si양이 많은 새로운 Pd-실리사이드인 PdSi상이 존재하는 것 때문이다.

  • PDF

Dinitroethylenediamine Palladium(II)의 합성 및 결정구조 연구 (Synthesis and Structure Dinitroethylenediamine Palladium(II))

  • 남궁해
    • 한국결정학회지
    • /
    • 제15권2호
    • /
    • pp.74-77
    • /
    • 2004
  • Dinitroethylenediaminepalladium(II), $Pd(C_2H_8N_2)\;(NO_2)_2$의 결정구조는 a=7.425(3), b=8.480(4), c=11.885(2)${\AA}$, 사방정계(Orthorhombic), 공간군 $A2_1ma$, 공간군 번호 36이며, Z=4, V=748.3(4)${\AA}^3,\;D_c=2.295\;gcm^{-3},\;{\mu}=2.457mm^{-1}$이었다. 구조분석은 중금속법으로 풀었으며, 최소 자승법으로 정밀화하였고, 최종 신뢰도 값들은 377개의 회절반점에 대하여 $(R_1=0.0306,\;R_w=0.0802,\;R_{all}=0.0320,\;S=1.166)$이었다. 최종 분석한 착염의 결합거리와 각들은 기존에 알려진 해당 자료들에 상응하였다. 착염의 구조는 Reiset's salt type 유사체와 같은 일차원 구조로써 c축을 따라서, Pd-Pd 거리가 3.762(2) $(\AA)$이고, 각 $161.41(5)^{\circ}$인 지그재그 사슬구조를 형성하고 있다. 사슬내에서나 사슬간에는 질소와 산소사이에 각각 3.05(1)과 3.15(1) ${\AA}$인 수소결합으로 연결되어 있다.

Baseline Serum Interleukin-6 Levels Predict the Response of Patients with Advanced Non-small Cell Lung Cancer to PD-1/PD-L1 Inhibitors

  • Da Hyun Kang;Cheol-Kyu Park;Chaeuk Chung;In-Jae Oh;Young-Chul Kim;Dongil Park;Jinhyun Kim;Gye Cheol Kwon;Insun Kwon;Pureum Sun;Eui-Cheol Shin;Jeong Eun Lee
    • IMMUNE NETWORK
    • /
    • 제20권3호
    • /
    • pp.27.1-27.11
    • /
    • 2020
  • Although various studies on predictive markers in the use of PD-1/PD-L1 inhibitors are in progress, only PD-L1 expression levels in tumor tissues are currently used. In the present study, we investigated whether baseline serum levels of IL-6 can predict the treatment response of patients with advanced non-small cell lung cancer (NSCLC) treated with PD-1/PD-L1 inhibitors. In our cohort of 125 NSCLC patients, the objective response rate (ORR) and disease control rate (DCR) were significantly higher in those with low IL-6 (<13.1 pg/ml) than those with high IL-6 (ORR 33.9% vs. 11.1%, p=0.003; DCR 80.6% vs. 34.9%, p<0.001). The median progression-free survival was 6.3 months (95% confidence interval [CI], 3.9-8.7) in the low IL-6 group, significantly longer than in the high IL-6 group (1.9 months, 95% CI, 1.6-2.2, p<0.001). The median overall survival in the low IL-6 group was significantly longer than in the high IL-6 group (not reached vs. 7.4 months, 95% CI, 4.8-10.0). Thus, baseline serum IL-6 levels could be a potential biomarker for predicting the efficacy and survival benefit of PD-1/PD-L1 inhibitors in NSCLC.

하고초 추출물을 첨가한 샐러드드레싱의 품질 특성 (Quality Characteristics of Salad Dressing added with Prunella vulgaris L. Extract)

  • 류지혜;황영;박영희;김영
    • 한국식품영양학회지
    • /
    • 제31권1호
    • /
    • pp.202-211
    • /
    • 2018
  • This study was conducted to develop a salad dressing using Prunella vulgaris L. (PV) extracts. In addition, the study was also aimed at evaluating the quality characteristics of the salad dressing containing various amounts of PV extracts. Salad dressing was prepared by adding 0% (PD-0), 9.4% (PD-20), 18.8% (PD-40), 28.2% (PD-60), 37.6% (PD-80), 47.0% (PD-100) of PV extract. The quality characteristics (sugar contents, salinity, color value, total phenol contents, total flavonoid contents, DPPH, ABTS+ radical scavenging activities, and sensory acceptability) of the dressing were analyzed. According to the results of the study, the sugar contents and salinity of salad dressing increased according to the added amount of PV extract (p<0.001). The color values of lightness and yellowness of salad dressing increased according to the added amount of PV extract, whereas color value of redness decreased (p<0.001). Antioxidant activities were improved depending on the amount of PV extracts (p<0.001). The sensory acceptability (flavor, medicinal flavor, saltiness, sourness, bitterness and viscosity) were significantly higher in the dressing added with 18.8% PV extracts than in the other samples. Based on this result, a storage experiment was conducted by comparing PD-40 and PD-C. After 4 weeks of storage at $4^{\circ}C$ and $24^{\circ}C$, the quality characteristics were observed and the pH was increased in the later stages of storage (p<0.05). The depicted that, viscosity increased with storage time at $4^{\circ}C$ (p<0.001). General bacteria and coliform were not detected during storage. These results indicated that salad dressing with the addition of 18.8% PV extracts has the best quality.