• 박물관보존과학
• /
• 제14권
• /
• pp.37-60
• /
• 2013

국립중앙박물관 소장 고구려 벽화는 국립중앙박물관 도록에 소개된 벽화 모사도와 일제 강점기에 촬영한 유리건판 사진으로만 제공되어 왔다. 그러나 이번에 수행한 국립중앙박물관 소장 고구려 벽화 편의 보존과학적 처리와 분석을 통해 전모를 파악할 수 있게 되었다. 보존과학적 처리는 벽화 편의 바탕층의 구조와 성분, 균열 등의 손상 파악과 퇴색된 채색 부분에 광학현미경과 적외선 조사를 했으며, 취약한 벽체와 박락된 채색층 강화에 중점을 두고 수행하였다. 더불어 적외선 조사한 결과를 국립중앙박물관 소장 벽화 모사도와 유리건판사진과 비교하여 고분의 위치를 조사했으며, 일부 벽화 편에서 감신총, 개마총, 고산리1호분, 운봉리고분으로 확인되었다. 고구려 벽화 편에 채색된 안료의 성분 원소와 벽체층의 광물구조를 분석하였다. 분석결과, 모든 측정 위치에서 방해석[calcite, CaCO₃]이 확인되었다. 이는 벽화의 바탕재료로 보이며, 석회층 위에 안료를 채색한 것으로 판단된다. 안료 색상 중 갈색을 포함한 황색은 산화철[hematite, Fe₂O₃]로 검출되었고 일부 편에서는 백연석[cerussite, PbCO₃]과 산화납[lead oxide, PbO]이 확인되었다. 이는 연백[lead white, 2PbCO₃·Pb(OH)₂]의 산화물로 추정된다. 또한 적색에서는 주사[cinnabar, HgS], 흰색에서는 방해석[calcite, CaCO₃]과 백연석[cerussite, PbCO₃]이 확인되었다.

• 한국지반환경공학회 논문집
• /
• 제15권8호
• /
• pp.39-44
• /
• 2014

초임계 조건에서 제조된 망간산화물이 코팅된 활성탄($Mn_3O_4$/AC)에 의한 납 흡착특성을 규명하기 위해 칼럼실험을 통해 파과특성에 미치는 운전변수의 영향에 관해 실험하였다. 활성탄에 망간산화물을 코팅시킴으로써 물질전달대와 평형흡착량은 대략 2.8배 증가하는 것으로 나타났다. 흡착층 높이의 증가는 수용액이 흡착대에 체류하는 시간을 증가시켜 파과시간, 물질전달대와 평형흡착량을 증가시키는 것으로 나타났다. 칼럼으로 공급되는 유량이 증가함에 따라 수용액으로부터 흡착제로 납이 빠르게 전달되어 접촉되므로 파과시간과 물질전달대가 감소하였다. 유량 증가는 흡착대에서 납의 체류시간을 감소시켜 흡착경계면에서의 확산현상을 감소시키므로 평형흡착량을 감소시키는 것으로 나타났다. 칼럼으로 유입되는 납 농도가 증가하면 흡착제로 전달되는 납의 양이 증가하여 물질전달이 빠르게 완료되므로 파과시간과 물질전달대가 감소하는 것으로 나타났다.

• Nuclear Engineering and Technology
• /
• 제56권7호
• /
• pp.2444-2451
• /
• 2024

This work demonstrates a new sol-gel approach for synthesizing PbO₂-doped zirconia using zircon mineral precursors. The streamlined methodology enables straightforward fabrication of the doped zirconia composites. Comprehensive materials characterization was performed using XRD, SEM, and TEM techniques to analyze the crystal structure, microstructure, and morphology. Quantitative analysis of the XRD data provided insights into the nanoscale crystallite sizes achieved, along with their relationship to lattice imperfections. Furthermore, the gamma-ray shielding capacity for the PbO₂-doped zirconia samples was estimated by the Monte Carlo simulation, which proves an increase in the gamma ray shielding properties by raising the Pb concentration. The linear attenuation coefficient increased between 0.467 and 0.499 cm^-1 (at 0.662 MeV) by increasing the Pb content between 11 and 21 wt%. By increasing the Pb content to 21 wt%, the synthesized composites' lead equivalent thickness reaches 2.49 cm. The radiation shielding properties for the synthesized composites revealed a remarkable performance against low and intermediate γ-ray photons, with radiation shielding capacity of 37.3 % and 21.4 % at 0.662 MeV and 2.506 MeV, respectively. As a result, the developed composites can be employed as an alternative shielding material in hospitals and radioactive zones.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1996년도 춘계학술대회 논문집
• /
• pp.252-255
• /
• 1996

Superconducting current lead is one of the promising applications of the oxide high-Tc superconductors, because they have the advantage of decreasing heat conduction to low temperature region, comparing with a conventional cooper alloy lead. High critical current density is a key factor for the applications such as current lead. (Bi,Pb)$_2$Sr$_2$Ca$_2$Cu$_3$O$\_$x/ high Tc superconductor haute been investigated in terms of critical current density. Bi-2223 superconducting current lead made by CIP and solid state sintering process. Bi-2223 current lead that heat treated at 836$^{\circ}C$ for 240 h in 1/13 P$\_$O$_2$/ had over 150 A/$\textrm{cm}^2$ of critical current density at 77K. We knew that the superconducting properties of tube type current leads were better than rods type of them. And we investigated the relation of Bi-2223 formation and heat treatment condition by XRD and SEM analysis.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2003년도 춘계종합학술대회
• /
• pp.366-369
• /
• 2003

High T$_{c}$ superconducting lines will be applied as key materials in the areas of power transmission line; magnetic levitation of vehicle; magnetic separation; magnetic energy storage and marine propulsion. A combination method of electrophoresis deposition and zone-melting for preparation of YBaCuO tape is proposed. The submicron particle powder of YBaCuO made by sol-gel method is used in the electrophoresis process. A 40~50${\mu}{\textrm}{m}$ thickness of YBaCuO film on Ag plate could be deposited in about three minutes. After deposition the film is rolled and heat treated in order to increase the density and the adhesion of the film to the Ag plate. Silver(Ag) and lead oxide(PbO) were added in the YBaCuO powder in order to reduce its melting point. The YBaCuO coating with controlled Ag and PbO contents was preliminarily zone-melted at about 945$^{\circ}C$.>.

• Journal of information and communication convergence engineering
• /
• 제1권2호
• /
• pp.63-66
• /
• 2003

High $T_c$ superconducting lines will be applied as key materials in the areas of power transmission line; magnetic levitation of vehicle; magnetic separation; magnetic energy storage and marine propulsion. A combination method of electrophoresis deposition and zone-melting for preparation of YBaCuO tape is proposed. The submicron particle powder of YBaCuO made by sol-gel method is used in the electrophoresis process. A 40∼50 ${\mu}\textrm{m}$ thickness of YBaCuO film on Ag plate could be deposited in about three minutes. After deposition the film is rolled and heat treated in order to increase the density and the adhesion of the film to the Ag plate. Silver(Ag) and lead oxide(PbO) were added in the YBaCuO powder in order to reduce its melting point. The YBaCuO coating with controlled Ag and PbO contents was preliminarily zone-melted at about $945^{\circ}C$.

• 한국결정성장학회지
• /
• 제9권2호
• /
• pp.141-148
• /
• 1999

Ir 도가니에서 PbO와 $WO_{3}$를 50 %~50 % 혼합한 시료로 부터 쵸코랄스키 성장방법에 의해 고품질의 순수한 $PbWO_{4}$와 Nb 도핑한 $PbWO_{4}$를 성장 시켰다. 결정은 성분의 선택적 결손에 부합하는 화학양론적 변화는 $PbWO_{4}$의 노란색 형성에 원인이 되었다. X선 회절 실험을 통해서 각 $PbWO_{4}$ 결정의 격자상수 변화를 조사하였으며 광발광, 광흡수 및 라만 스펙트럼에 대한 특성들에 대해 조사를 하였다. 광발광은 10 K~300 K 온도 영역에서 측정 되었으며 낮은 온도 영역에서는 미흡한 온도의존성을 보였으며 200 K 온도 이상에서는 열적소광에 의한 광발광 강도의 감소를 보였다. PL 강도와 반치폭의 온도 의존성으로 부터 각 PWO 시료에 대한 활성화 에너지, Huang-Rhys 결합상수, 비균질선폭계수를 구하였다.

• 한국세라믹학회지
• /
• 제26권4호
• /
• pp.459-470
• /
• 1989

Single crystals of rare-earth iron garnets were grown from solutions of molten lead oxide, lead fluoride, baric oxide, iron oxide, and the oxides of yttrium, samarium orgadolinium. The crystals were grown by slow cooling technique. A convenient composition was 41.8mol% PbO, 20.59mol% PbF2, 8.23mol% B2O3, 20.00mol% Fe2O3 and 10.00mol% R2O3 where R is Y, Sm or Gd. For this experiment, platinum crucibles of size 20, 30cc and a vertical siliconit tube furnace were used. The precipitation temperature of YIG was observed in the range of 115$0^{\circ}C$-112$0^{\circ}C$ and the optimum growth conditions in this experiment were determined. The nucleation rate was controlled by the holding time after the fast colling, the growth rate by the slow cooling conditiions. The form of the grown YIG crystals showed a combination of {110} and {211}, and the size of the crystals grown in this experiment was up to about 9mm under the conditions of holding time 16hour, cooling rate 2$^{\circ}C$/hr. and temperature range 115$0^{\circ}C$-90$0^{\circ}C$. The precipitatin temperature of SmIG was observed in the range of 105$0^{\circ}C$-98$0^{\circ}C$ and the size of the crystals grown in this experiment was up to about 5mm under the conditiions of holding time 16hours, cooling rate 2$^{\circ}C$/hr. and temperature range 100$0^{\circ}C$-80$0^{\circ}C$.

• 한국재료학회지
• /
• 제7권3호
• /
• pp.196-202
• /
• 1997

PLT 박막의 증착방법으로 ECR PECVD법을 이용한 경우 $440~500^{\circ}C$의 비교적 낮은 온도에서 순수한 perovskite구조를 가진$(Pb,La)TiO_{3}$박막을 성공적으로 제조하였다. 기판온도 증가에 따라 반응기체 및 산화물(특히 Pb oxkde)의 휘발성이 증대되어 증착속도가 감소하고 (Pb oxide)의 휘발성이 증대되어 증착속도가 감소하고 (Pb+La)/Ti조성비가 감소하였다. $460~480^{\circ}C$의 온도범위에서 증착한 PLT 박막이 화학양론비를 가장 잘 만족하였으며 이때 높은 유전상수와 가장 우수한 누설전류 특성을 나타내었다. $La(DPM)_{3}$ 유입량 증가에 따라 $(Pb, La)TiO_{3}$ 박막의 La 조성이 거의 직선적으로 비례하여 증가하였는데 La/Ti비가 3.0%에서 9.5%까지 증가함에 따라 PLT 박막의 유전 상수는 360부터 650까지 증가하였고 100kV/cm 전기장하에서의 누설전류도 $4{\times}10^{-5}$에서 $4{\times}10_{-8}A/cm^2$로 향상되었다.

• 보존과학연구
• /
• 통권26호
• /
• pp.165-188
• /
• 2005

From the ancient to these days, there have been used many kinds of pigment which have two types that are inorganic pigment and organic pigment. At the ancient times, natural pigment had been used but the artificially mixed pigment has been used in modern times. By the way, searching for studies has been studied recently, it would be said the ancient pigments such as Danchung, Wall painting and Mural painting are the mainthema. However, studies about the pigments used in modern pictured relics have rarely can be found. Therefore, this analysis of Ilweolokdo would be important at the point of the pigments used in pictures of royal family in modern times and the results can be briefly summarized as below; Firstly, the results of qualitative analysis of the pigments that base or all pigments of picture was detected components of Ca, Fe and As, this results meaning that picture was used filler and basic paint. Secondly, a result of the analysis on the composition elements of the pigments shows that the main components in their composition are ;White - Lead Cyanamide($2PbCO_3$.$Pb(OH)_2$) or Titanium Oxide($TiO_2$)Blue - Ultramarine($2(Na_2O$.$Al_2O_3$ .$2Si_O2$).$Na_2S_2$)Green - Emerald green($C_2H_3A_s3Cu_2O_8$)Gold - Gold(Au), Red-Red Lead($Pb_3O_4$) or Cinnabar(HgS)Black - Carbon(C)Thirdly, X-ray diffraction analysis of crystalline structure for the blue and green pigment peeling off in picture shows that the components of blue pigment is Ultramarine($2(Na_2O$.$Al_2O_3$ .$2Si_O2$).$Na_2S_2$) and green pigment is Emerald green($C_2H_3A_s3Cu_2O_8$). Especially, microcrystalline structure of the green pigment was the shape like a cross section of wood. Consequently, we knew through the analysis of qualitative and microcrystallinestructures seen on the cross section of analyzed pigments layer that the all pigments used in the Ilweoloakdo is possible to use synthetic pigments in modern.