• Journal of Food Hygiene and Safety
• /
• v.28 no.1
• /
• pp.45-49
• /
• 2013

This study aimed to determine heavy metal contents in sesame oil samples produced in Korea through microwave-assisted acid digestion without using an emulsifier. Three heavy metal, cadmium (Cd), lead (Pb) and arsenic (As) in twelve sesame oil samples were determined by ICP-MS. The validation of analysis method was checked by standard addition method (10 and $100{\mu}g/kg$). As a result, linearity ($R^2$) was above 0.999 and RSDs were lower than 4%. The recovery of Cd, Pb and As ranged between 98.5-101.6%, 100.3-101.3%, and 102.1-111.2%, respectively. The detected ranges in sesame oil samples were as follows; N.D. to $0.109{\mu}g/g$ for Cd, 0.014 to $0.200{\mu}g/g$ for Pb and 0.014 to $0.125{\mu}g/g$ for As, respectively. Therefore, sesame seeds and products grown in heavy metal-polluted regions which are used as food should be given priority attention and consideration.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.10
• /
• pp.1747-1756
• /
• 2000

Crab shell particles (Protunus trituberculatus) and activated carbon (Norit 0.8 SUPRA) were used as packing material in a fixed-bed column. When 1 g crab shell was added in the column packed with 10 g activated carbon. breakthrough to influent 10 mg Pb/L occurred at 1520 bed volumes. as compared to 380 bed volumes for 10 g activated carbon only. Addition of crab shell particles into activated carbon column resulted in increased uptake of lead. The dramatic improvement might be attributed to an increase in $co_3{^{2-}}$ and $OH^-$ available for the binding of lead. From the result of analyses, the major mechanism of lead removal was based on dissolution of $CaCO_3$ in the crab shell followed by precipitation of $Pb_3(CO_3)_2(OH)_{2(s)}$ on the surface of activated carbon. The lead uptake increased two fold as the influent lead concentration was increased from 10 to 50 mg/L. However, it decreased by 40% as the influent pH was lowered from 5.0 to 3.0.

• Journal of Korea Soil Environment Society
• /
• v.2 no.1
• /
• pp.21-34
• /
• 1997

Retention ponds have been dug along some of the motorways in France to minimize environmental pollution by preventing pollutants from spreading over the surrounding area. A series of studies have been conducted to determine the physicochemical characteristics of the particles settling down in such a pond to evaluate the effectiveness of the pond as a trap for heavy metals such as Pb, Zn and Cd. The highly contaminated roadside soil and the uncontaminated background soil were also studied for comparison. The settling particles exhibited heavy metal concentrations of 2 to 8 times as much as the background Sologne soil, depending on the metal species. However, the heavy metal concentrations in the roadside soil were 7 to 26 times higher than those in the· settling particles. Sequential extraction experiments illustrated that the highly contaminated roadside soil consisted mainly of the readily soluble fractions (FII, FIII and FIV) for all three heavy metals, but little W which is hardly soluble. The proportion of W considerably increased up to one third of the total in the settling particles for Pb and Zn. This result as well as the large concentration differences between the roadside soil and the settling particles indicates that most of the heavy metals were lost to the surroundings even before reaching the retention pond. Cd exhibited somewhat different behavior in that the most soluble FI, which is negligible for Pb and Zn, occupied as much as one fourth of the total in the roadside soil. In addition, FV for Cd did not increase in the settling particles.

• Journal of the Korean Society of Costume
• /
• v.58 no.2
• /
• pp.62-77
• /
• 2008

This study aims to analyze color characteristics centered by women's suit styles that represent masculinity remarkably. Through this, it figures out color's type and continuance availability as a representing tool to express masculinity to provide useful color information which can be applied effectively to various color planning. For this research, related images were collected among women's pants suits appeared in $2004{\sim}2006's$ Paris, London, New York and Milan collection F/W that are most similar to modern man's suit. Among them, the study analyzes 319 pictures where the features of masculinity were represented effectively. The referred color values were earned by converting $L^*a^*b^*$ values measured through the color extracting tool of Computer program (Adobe Photoshop CS) and color tone characteristic were analyzed by classifying 12 color PCCS and 5 achromatic colors. The result of the study are as follows: First, based on standard of color hue and tone, in terms of color hue, PB, YR, Y were frequently shown up but G, BG series were not found much after analyzing overall women's pants suit color characteristics shown in $2004{\sim}2006$ Paris, London, New York and Milan collection. Second, the color analysis about 3years of $2004{\sim}2006$ tells that achromatic colors have been most widely used in every year. In terms of color hue, PB, YR, Y series were appeared most popular and G, BG classes weren't appeared frequently. In addition, once looking at yearly color tone distribution trend, like overall color tone distribution result, Bk, w, dkg, g, p were highly used as sequential and b, v, dp, sf, ItGy series show low distribution level. And such a distribution level of low and high in frequency has been showed continuously as a similar style. Accordingly, through the study, as a tool to express masculinity in women's suit, achromatic colors like black and white series and PB, YR, Y series color were investigated as most popular uses. And as color tones, Bk, w, dkg, g, p were used frequently.

• Journal of the Korean Wood Science and Technology
• /
• v.28 no.3
• /
• pp.1-8
• /
• 2000

To develop the technology of producing structural board from low grade materials, an attempt was made to produce strand/particle composites from split wood strand(S) and particle(P) of (Cryptomeria japonica D. Don), which changed the layer construction and the ratio of S/P. The influence of layer construction on board properties was determined, focusing on the number and alignment of the S layers. The effect of weight ratio of S/P (3:7, 1:1, 7:3) on mechanical properties was also discussed on seven layered panel. Mechanical properties were determined from static bending tests to give parallel and perpendicular modulus of rupture (MOR) and modulus of elasticity (MOE), and the internal bond (IB) strength. In general, the surface strand layers contributed to the MOR and MOE. The parallel MOR and MOE values were the largest for the single layered S panel (only Slayers: S1), but the perpendicular MOR and MOE was the smallest. Perpendicular MOR and MOE were the largest for seven layered composite that had two cross oriented strand layers (SPSPSPS: SP7). Specimens retained more than half of their MOE and MOR after two hours in boiling water and one hour soaking. IB was the largest for the panel having only P layers, however, differences in IB strength were not identified among the other multi-layered composite panels thus the effect of layer construction on IB strength was small. Thickness swelling (TS) and surface roughness were smaller for the composite having P layers on the surface than for those having S layers. The addition of strands did not enhance the mechanical properties (MOR, MOE, IB). TS values for the panels, with which the S/P ratio was over than 1:1, was the similar to the value for the single layered S panels.

• The Korean Journal of Mycology
• /
• v.15 no.3
• /
• pp.175-182
• /
• 1987

A raw starch saccharifying enzyme from Aspergillus sp. SN-871 was purified by ammonium sulfate precipitation, DEAE-cellulose column chromatography, CM-Sephadex C-50 column chromatography and Sephadex G-75 gel filtration. The specific activity of purified enzyme was 18 fold and the yeild was 13.40%. The molecular weight of the purified enzyme was estimated as approximately 40,000 dalton by the method of Andrews gel filtration. The optimum pH and temperature for this enzyme were found to be 4 and $40^{\circ}C$, respectively and the stable range of pH was 2 to 5. The enzyme was themostable at below $60^{\circ}C$ and inactivated at $70^{\circ}C$. It showed a tendency to increase the enzyme activity under the presence of 0.01 M $BaCl_2$, but under 0.01 M$Pb(NO_3)_2$, $AgSO_4$, and $K_3Fe(CN)_6$ and citric acid etc. inhibited it completely. The substrate specifity of enzyme showed a tendency to increase the enzyme activity under addition of dextrin and glycogen, but under saccharose inhibited it. COD removal rate of Aspergillus sp. SN-871 was approximately 67 to 68%.

• Journal of the Korean Ceramic Society
• /
• v.41 no.11
• /
• pp.851-857
• /
• 2004

The stabilizing characteristics of heavy metals in the silicate glass (SD), borosilicate glass (BD), and leadsilicate glass (PD) containing Electric Arc furnace (EAF) dust were studied by the Toxic Characterization Leaching Procedure (TCLP) test. Also, the dependence of the amount of EAF dust upon structural changes of SD, BD, and PD glasses and the TCLP results were investigated by the XRD and FT-IR spectroscopy. In the XRD results, all of SD, BD, and PD specimens containing dust up to 30 wt% were amorphous without crystallizing. In the TCLP test, the concentration of heavy metals leached from the glasses increased with the amount of EAF dust added. The SD specimen series showed the lowest heavy metal leaching and the heavy metal leachate of the PD specimens were lower than those of the BD specimens. But, the Pb leaching from the PD specimens was the highest in the PD glass composition due to the high Pb content. The value of oxygen/network former ratio could be used to compare the chemical durability within the same glass series, but not proper to do between the different glass series. Adding the EAF dust to the SD mother glass, decreased the Si-O-Si symmetry and increased the non-bridging oxygen, which weakened the structure and decreased the chemical durability of glasses. In the BD series glasses, the addition of EAF dust caused the structural changes from tetra-borate group to di-borate group and the formation of the 2-dimensional layer structure of pyre- and ortho- borate, which decreased the chemical durability of glasses. It is concluded that SD series glass among the 3 kinds of glasses is the most effective to stabilize the heavy metals of EAF dust.

• 보존과학연구
• /
• s.27
• /
• pp.5-22
• /
• 2006

Mireuksa is a temple that was established in the Baekjea Period and continued around to the 16thcentury. The sites of the temple throughout diverse periods such as the United Shilla Period, KoryuPeriod, and Chosun Period including the one of the early temple in the late Baekjea Period were discovered. In those temple sites, there were lots of diverse artifacts discovered including artifacts in the Bronze Age. In this study, the compositions of four bronze bells excavated from Mireuksa site in Iksan were analyzed and the manufacturing technique of bronze bells was studied through the observation of microstructure. Also, the analytical cases of ancient bronze bells were collected and compared. Furthermore, the provenance study of the bronze bells site was attempted with the Pbisotope ratio. The results aim to offer crucial keys for discovering the aspect of society as well as information about the origin, development, and the route of propagation of ancient technologies. Bronze bell No. 1 showed an unexpected composition as Cu was found 98.5% in it. There were shown twins which were created by annealing and an even phase in the fine grains. It was also shown that bronze bell No. 2 and 4 had a high content of Pb although they showed a similar composition with general bronze bells in terms of Sn content. As shown in the analysis characteristics table of Korean bronze bell of this study, the ancient bronze bell used Pb of which content was limited to 2.12% in general, however, the results showed 15.5% and 13.2% respectively, which is an excessive amount. Asa result of analyzing inclusion in the microstructure of bronze bell No. 2, it was found that sulfide group mineral was used since there appeared S(14.55%). Also, it was proven that $CuFeS_2$ or$Cu_5FeS_4$ was used as a raw material because there was a small amount of Fe. As a result of analyzing inclusion of bronze bell No. 4, the bronze bell sample contained S(13.43%) and it is thought that sulfide group mineral was used, however, it had no Fe. Therefore, it is not connected to $CuFeS_2$ which is the main mineral of Korea. In addition, a strain line was shown with processing in bronze bell No. 2 and 4. As a result of provenance study of bronze bell No. 2 and 4 using the Pb isotope ratio, they or their raw materials are estimated to come from the southern China. Bronze bell No. 3 showed only Cu and Sn, and it is featured with a relatively low amount of Sn(6.63%). The microstructure has only phase, andintergranular corrosion was highly in progress.

• Journal of the Korean Chemical Society
• /
• v.21 no.1
• /
• pp.60-66
• /
• 1977

In the addition condensation reaction of m-phenylenediamine(MPD) and resorcinol (RES) with formaldehyde, the suspension polymerization in liquid paraffin was performed and the bead polymers were obtained with good results. The polymers were treated with dilute aqueous sodium hydroxide solutions in order to improve the adsorption capacity to the metallic ions and the adsorptivity to the several metallic ions, such as $Cd^{2+},\;Pb^{2+},\;Al^{3+},\;Mg^{2+},\;Co^{2+},\;and\;Hg^{2+}$ of the alkali-treated and untreated polymers were tested. These MPD-RES-F type resins showed better adsorption capacity to the heavy metallic ions such as $Cd^{2+}\;and\;Hg^{2+}$ than the light metallic ions such as $Pb^{2+},\;Al^{3+}\;and\;Mg^{2+}$, and the treatment of the resins with about 20 percent aqueous sodium hydroxide solution showed significant improvement of the adsorption capacity to the metallic ions in all cases.

• Resources Recycling
• /
• v.26 no.2
• /
• pp.11-17
• /
• 2017

Many problems are occurred by using industrial by-product and municipal solid waste in the cement manufacturing process. The main components of chlorine by-pass dust generated by the use of the wastes are $K^+$, $Cl^-$, and a slight amount of heavy metals is also contained. In terms of waste recycling, it is necessary to eliminate the heavy metals. Therefore, in this study, the experiments for the removal of heavy metals from KCl which was produced by chlorine by-pass dust were conducted. In order to find optimum conditions for the removal of heavy metals, we have controlled the amount of water and precipitator. The type and concentration of heavy metals in KCl were analyzed. The concentration of heavy metals decreased as amount of precipitator increased. The heavy metals such as Pb, Cd, and As were not detected in dust A and B, when the mixing ratios between dust A(B) and water were controlled to be 1:2 (1:2, 1:3.5) with the addition of 3% precipitator (NaOCl).