• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1997년도 한국재료학회 추계학술발표회
• /
• pp.140-140
• /
• 1997

• 한국세라믹학회지
• /
• 제36권11호
• /
• pp.1235-1242
• /
• 1999

• 한국분말재료학회지
• /
• 제8권2호
• /
• pp.110-116
• /
• 2001

Abstract To investigate the effect of mechanical alloying process to thermoelectric properties of PbTe sintered body, Pb-Te mixed powder with Pb : Te : 1 : 1 composition was mechanically alloyed using tumbler-ball mill. Thermoelectric properties of the sintered body were evaluated by measuring of the Seebeck coefficient and specific electric resistivity from the room temperature to 50$0^{\circ}C$. Sintered body of only mechanically alloyed PbTe powder showed p-type behavior at the room temperature, and occurred type transition from p-type to n-type at about 30$0^{\circ}C$. PbTe sintered body which was fabricated using heat treated powder in $H_2$ atmosphere after mechanical alloying showed stable n-type behavior under 50$0^{\circ}C$. N-type PbTe sintered body fabricated by mechanical alloying process had 4 times higher power factor than that fabricated by the melt-crushing process. Application of a mechanical alloying process to fabricate of n-type PbTe thermoelectric material seemed to be useful to increase the power factor of PbTe sintered body.

• 한국주조공학회지
• /
• 제2권1호
• /
• pp.12-18
• /
• 1982

The present investigation was made to abtain a fine distribution of Pb Particles in AL - Pb binary alloys , which have a broad miscibility gap and large specific difference, by means of rapid Cooling of the molten alloys. Al-2.4% Pb, Al-5.5wt% Pb and Al-8.0wt % Pb alloy were used. The rapid cooling operation was performed by free falling of homogeneous liquid Al-Ph alloys into the water-cooled copper mold, and thermal analysis was made. Microstructures were observed, and variations of size and number of Pb particles were analysicle analyzer. By the result of examination with the varing cooling rates 100 to $210^{\circ}C/sec$ fine distributions of Pb particles were obtained with high cooling rate. Under same cooling condition, the best rapid cooling effect was recognized in Al-5.5wt% Pb alloy.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1994년도 추계학술대회 논문집
• /
• pp.13-16
• /
• 1994

In this paper, xPb(Zn$_{1/3}Nb_{2/3}$)$O_3$-yPbTiO$_3$-zPbZrO$_3$-(0.5wt%)MnO$_2$ ceramics were fabricated by the mixed oxide method sintered at $1250^{\circ}C$ for 2[hr] and then the deielectric, electromechanical coupling factor($K_{p}$ and mechanical coupling factor(Qm) properties were investigated. In 0.1PZN-0.45PT-0.45PZsample, dielectric properties and electromechanical coupling factor were 829 and 29%. In the case of 0.5PZN-0.45PT-0.50PZ sample, that was 101 according to mechanical quality facotr. molphotropic phase boundary(MPB) certained area which $PbTiO_3$addition quatity 40∼50[㏖%].

• 한국환경과학회지
• /
• 제11권4호
• /
• pp.361-366
• /
• 2002

Several effects on Pb$^{2+}$ removal by crab shell from aqueous solution were investigated. As the increase of initial Pb$^{2+}$ concentration and decrease of initial crab shell concentration, the time required to reach an equilibrium state and the residual Pb$^{2+}$ concentration increased. In our experimental ranges, the optimum initial Pb$^{2+}$ concentration and crab shell concentration were below 103 mg/$\ell$ and over 0.5 mg/$\ell$, respectively. Also, in order to investigate the mechanism of Pb$^{2+}$ removal by crab shell in aqueous solution, the crab shell was compared with chitosan and chitin on aspects of Pb$^{2+}$ removal capacity and Pb$^{2+}$ removal rate. The Pb$^{2+}$ removal by crab shell was greater than that by chitin and chitosan. The role of chitin was not so great in Pb$^{2+}$ removal by crab shell. The Pb$^{2+}$ removal by chitosan was not exactly correlated to the molecular weight of chitosan. weight of chitosan.

• 한국세라믹학회지
• /
• 제30권8호
• /
• pp.635-642
• /
• 1993

To obtain a higher dielectric constant material, we investigated Ca substitution for Pb in PbZrO3. In this study, the four mixtures of (Pb0.68Ca0.32)ZrO3, (Pb0.65Ca0.37)ZrO3, (Pb0.63Ca0.37)ZrO3, and (Pb0.60Ca0.40)ZrO3 were prepared by coprecipitation reaction of Pb(NO3)2, ZrOCl2, and CaCl2 with (NH4)2CO3 and NH4OH in aqueous solution. The (Pb1-xCax)ZrO3 with different x mole fractions (x=0.35, 0.37) showed not only high dielectric constant, but also high Q values and low temperature coefficient of the capacitance.

• 한국세라믹학회지
• /
• 제20권1호
• /
• pp.19-24
• /
• 1983

Dielectrics used as capacitor was studied in the system of $Pb(MgW)_{0.5} O_3-PbTiO_3-PbZrO_3$ Curie tempera-tures of $PbTiO_3 PbZrO_3$ and $Pb[MgW]_{0.5} O_3$ were 49$0^{\circ}C$ 23$0^{\circ}C$ and 39$0^{\circ}C$ respectively. When these materials formed solid solution the more amount of $Pb(MgW)_{0.5}O_3$ was increased the more Curie temperature lowered and dielectric constant increased. Higher dielectric constants were measured in the solid solution of which X-Ray diffraction patterns were changed. Especially Curie temperature and dielectric constant were 85$^{\circ}C$ and 4159 respectively in the composition of 60 $Pb(MgW)_{0.5}O_3-30 PbTiO_3-10PbZrO_3$. Also in this composition ferroeletric material with thermal stability was obtained.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 추계학술대회 논문집
• /
• pp.13-16
• /
• 2000

(PbS)$_{1-x}$ -(CuS)$_{x}$ thin films(x=0, 0.5, 1) were grown on glass substrates by using a chemical bath deposition method. The molecular ratio of Pb to Cu for the PbS-CuS thin films(x=0.5) was measured about 7:3 by using EDX and XRF. The resistivity of non-annealed (PbS)$_{1-x}$ -(CuS)$_{x}$ thin films was about 10 $\Omega$ . cm. However, after annealing, the resistivity of PbS showed a little change, while PbS-CuS and CuS significantly decreased in the range of 0.002 to 0.005$\Omega$.cm. PbS was p-type and CuS was n-type.-type.

• Journal of the Korean Wood Science and Technology
• /
• 제42권4호
• /
• pp.450-459
• /
• 2014

파쇄한 소나무와 참나무를 수중에서 Pb(II) 제거를 위한 흡착제로서 적용성을 검토하였다. 접촉시간, 초기 Pb(II) 농도, pH, 경쟁이온, 그리고 흡착제 주입량이 Pb(II) 흡착에 미치는 영향을 파악하기 위하여 회분 흡착 실험을 수행하였다. 동역학적 실험 결과, 소나무와 참나무에 Pb(II) 흡착은 유사 1차 모델과 유사 2차 모델 모두 적합한 것으로 나타났다. 평형 흡착 실험 결과는 결정계수가 소나무의 경우 0.956, 참나무의 경우 0.950으로 Freundlich 모델이 적합한 것으로 나타났다. 소나무와 참나무의 Pb(II) 최대 흡착양은 각각 16.853과 27.989 mg/g으로 나타났다. pH가 3에서 9로 증가함에 따라서 소나무와 참나무에 Pb(II) 흡착은 증가하였다. $Na^+$, $Ca^{2+}$, 그리고 $Al^{3+}$와 같은 양이온의 존재는 Pb(II) 흡착을 감소시켰다. Pb(II) 흡착은 증류수 조건에서 보다 해수에서 흡착량이 컸으며, 이는 해수에 존재하는 $CO{_3}^{2-}$와 $OH^-$ 이온이 Pb(II)와 화합물을 형성하기 때문이다. 본 연구를 통해서 Pb(II)로 오염된 물 정화에 소나무와 참나무가 활용될 것으로 판단된다.