• Journal of the Korean Ceramic Society
• /
• v.33 no.10
• /
• pp.1117-1123
• /
• 1996

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1997.10a
• /
• pp.140-140
• /
• 1997

• Journal of the Korean Ceramic Society
• /
• v.36 no.11
• /
• pp.1235-1242
• /
• 1999

• Journal of Powder Materials
• /
• v.8 no.2
• /
• pp.110-116
• /
• 2001

Abstract To investigate the effect of mechanical alloying process to thermoelectric properties of PbTe sintered body, Pb-Te mixed powder with Pb : Te : 1 : 1 composition was mechanically alloyed using tumbler-ball mill. Thermoelectric properties of the sintered body were evaluated by measuring of the Seebeck coefficient and specific electric resistivity from the room temperature to 50$0^{\circ}C$. Sintered body of only mechanically alloyed PbTe powder showed p-type behavior at the room temperature, and occurred type transition from p-type to n-type at about 30$0^{\circ}C$. PbTe sintered body which was fabricated using heat treated powder in $H_2$ atmosphere after mechanical alloying showed stable n-type behavior under 50$0^{\circ}C$. N-type PbTe sintered body fabricated by mechanical alloying process had 4 times higher power factor than that fabricated by the melt-crushing process. Application of a mechanical alloying process to fabricate of n-type PbTe thermoelectric material seemed to be useful to increase the power factor of PbTe sintered body.

• Journal of Korea Foundry Society
• /
• v.2 no.1
• /
• pp.12-18
• /
• 1982

The present investigation was made to abtain a fine distribution of Pb Particles in AL - Pb binary alloys , which have a broad miscibility gap and large specific difference, by means of rapid Cooling of the molten alloys. Al-2.4% Pb, Al-5.5wt% Pb and Al-8.0wt % Pb alloy were used. The rapid cooling operation was performed by free falling of homogeneous liquid Al-Ph alloys into the water-cooled copper mold, and thermal analysis was made. Microstructures were observed, and variations of size and number of Pb particles were analysicle analyzer. By the result of examination with the varing cooling rates 100 to $210^{\circ}C/sec$ fine distributions of Pb particles were obtained with high cooling rate. Under same cooling condition, the best rapid cooling effect was recognized in Al-5.5wt% Pb alloy.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1994.11a
• /
• pp.13-16
• /
• 1994

In this paper, xPb(Zn$_{1/3}Nb_{2/3}$)$O_3$-yPbTiO$_3$-zPbZrO$_3$-(0.5wt%)MnO$_2$ ceramics were fabricated by the mixed oxide method sintered at $1250^{\circ}C$ for 2[hr] and then the deielectric, electromechanical coupling factor($K_{p}$ and mechanical coupling factor(Qm) properties were investigated. In 0.1PZN-0.45PT-0.45PZsample, dielectric properties and electromechanical coupling factor were 829 and 29%. In the case of 0.5PZN-0.45PT-0.50PZ sample, that was 101 according to mechanical quality facotr. molphotropic phase boundary(MPB) certained area which $PbTiO_3$addition quatity 40∼50[㏖%].

• Journal of Environmental Science International
• /
• v.11 no.4
• /
• pp.361-366
• /
• 2002

Several effects on Pb$^{2+}$ removal by crab shell from aqueous solution were investigated. As the increase of initial Pb$^{2+}$ concentration and decrease of initial crab shell concentration, the time required to reach an equilibrium state and the residual Pb$^{2+}$ concentration increased. In our experimental ranges, the optimum initial Pb$^{2+}$ concentration and crab shell concentration were below 103 mg/$\ell$ and over 0.5 mg/$\ell$, respectively. Also, in order to investigate the mechanism of Pb$^{2+}$ removal by crab shell in aqueous solution, the crab shell was compared with chitosan and chitin on aspects of Pb$^{2+}$ removal capacity and Pb$^{2+}$ removal rate. The Pb$^{2+}$ removal by crab shell was greater than that by chitin and chitosan. The role of chitin was not so great in Pb$^{2+}$ removal by crab shell. The Pb$^{2+}$ removal by chitosan was not exactly correlated to the molecular weight of chitosan. weight of chitosan.

• Journal of the Korean Ceramic Society
• /
• v.30 no.8
• /
• pp.635-642
• /
• 1993

To obtain a higher dielectric constant material, we investigated Ca substitution for Pb in PbZrO3. In this study, the four mixtures of (Pb0.68Ca0.32)ZrO3, (Pb0.65Ca0.37)ZrO3, (Pb0.63Ca0.37)ZrO3, and (Pb0.60Ca0.40)ZrO3 were prepared by coprecipitation reaction of Pb(NO3)2, ZrOCl2, and CaCl2 with (NH4)2CO3 and NH4OH in aqueous solution. The (Pb1-xCax)ZrO3 with different x mole fractions (x=0.35, 0.37) showed not only high dielectric constant, but also high Q values and low temperature coefficient of the capacitance.

• Journal of the Korean Ceramic Society
• /
• v.20 no.1
• /
• pp.19-24
• /
• 1983

Dielectrics used as capacitor was studied in the system of $Pb(MgW)_{0.5} O_3-PbTiO_3-PbZrO_3$ Curie tempera-tures of $PbTiO_3 PbZrO_3$ and $Pb[MgW]_{0.5} O_3$ were 49$0^{\circ}C$ 23$0^{\circ}C$ and 39$0^{\circ}C$ respectively. When these materials formed solid solution the more amount of $Pb(MgW)_{0.5}O_3$ was increased the more Curie temperature lowered and dielectric constant increased. Higher dielectric constants were measured in the solid solution of which X-Ray diffraction patterns were changed. Especially Curie temperature and dielectric constant were 85$^{\circ}C$ and 4159 respectively in the composition of 60 $Pb(MgW)_{0.5}O_3-30 PbTiO_3-10PbZrO_3$. Also in this composition ferroeletric material with thermal stability was obtained.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.11a
• /
• pp.13-16
• /
• 2000

(PbS)$_{1-x}$ -(CuS)$_{x}$ thin films(x=0, 0.5, 1) were grown on glass substrates by using a chemical bath deposition method. The molecular ratio of Pb to Cu for the PbS-CuS thin films(x=0.5) was measured about 7:3 by using EDX and XRF. The resistivity of non-annealed (PbS)$_{1-x}$ -(CuS)$_{x}$ thin films was about 10 $\Omega$ . cm. However, after annealing, the resistivity of PbS showed a little change, while PbS-CuS and CuS significantly decreased in the range of 0.002 to 0.005$\Omega$.cm. PbS was p-type and CuS was n-type.-type.