• The KIPS Transactions:PartB
• /
• v.18B no.3
• /
• pp.109-116
• /
• 2011

In this paper, we introduce non-touch style interface system technology without any touch style controlling mechanism, which is called as "Air-interface". To develop this system, we used the full reflection principle of infrared (IR) light and then user's hand is separated from the background with the obtained image at every frame. The segmented hand region at every frame is used as input data for an hand-motion recognition module, and the hand-motion recognition module performs a suitable control event that has been mapped into the specified hand-motion through verifying the hand-motion. In this paper, we introduce some developed and suggested methods for image processing and hand-motion recognition. The developed air-touch technology will be very useful for advertizement panel, entertainment presentation system, kiosk system and so many applications.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.7
• /
• pp.16-22
• /
• 2014

Automotive NVH on brake operation is mainly caused by a coupling action of vehicle speed and inter parts friction and its frequency occurs over a broad band of 0.1 kHz~10 kHz. Especially, squeal noise, being a self-excited vibration generated by friction force between drum and lining, occurs over 1 kHz and consequently dynamic instability is induced when friction energy is applied to a brake vibration system. The squeal strongly depends on nonlinear properties influenced by the material of lining, velocity of vehicle, and the dynamic properties of a brake system. The dynamic properties are considered as a main influential design factor to squeal noise, however the analysis of the properties are rarely facilitated due to arbitrariness of shape by wearing down. In this paper, we research generating tendency of squeal noise through complex eigenvalue analysis, tracking drum brake's unstable modes in accordance with the wear shape of drum and lining such as tapered and bellmouth shape, and analyze computed unstable modes by variable shapes.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.11a
• /
• pp.563-566
• /
• 2003

The conventional testing as IEC-60587 is widely used in suface aging measurement of outside insulator those testing can carry out very short time in Lab testing. Also IEC-60587 testing is able to offer the standard judgement of relative degradation level of out side HV machine. Therefore it is very useful method compare to previous conventional tracking testing method and effective Lab testing method, But surface discharges(SD) have very complex characteristics of discharge pattern so it is required estimation research to development of precise analysis method. In recent, the study of IRR Camera is carrying out discover of temperature of power equipment through condition diagnosis and system development of degradation diagnosis.

• The Journal of Korea Robotics Society
• /
• v.14 no.1
• /
• pp.74-79
• /
• 2019

In this paper, we develop a virtual experimental environment to investigate users' eye gaze in human-robot social interaction, and verify it's potential for further studies. The system consists of a 3D robot character capable of hosting simple interactions with a user, and a gaze processing module recording which body part of the robot character, such as eyes, mouth or arms, the user is looking at, regardless of whether the robot is stationary or moving. To verify that the results acquired on this virtual environment are aligned with those of physically existing robots, we performed robot-guided quiz sessions with 120 participants and compared the participants' gaze patterns with those in previous works. The results included the followings. First, when interacting with the robot character, the user's gaze pattern showed similar statistics as the conversations between humans. Second, an animated mouth of the robot character received longer attention compared to the stationary one. Third, nonverbal interactions such as leakage cues were also effective in the interaction with the robot character, and the correct answer ratios of the cued groups were higher. Finally, gender differences in the users' gaze were observed, especially in the frequency of the mutual gaze.

• Journal of the Korea Convergence Society
• /
• v.9 no.11
• /
• pp.1-7
• /
• 2018

Recently, the activity area in the indoor space has been widening. Various types of service technologies have been developed and applied user location, tracking, spatial pattern analysis and environmental analysis in indoor space. BLE-based beacon is used for the service technology in the indoor space. Therefore, in this paper, we collected and analyzed signals for indoor positioning based on beacon. For this purpose, a module was designed to analyze the efficiency of indoor location measurement using beacon. Experimental results show that the accuracy of the measured data at close range is improved. Also, it was analyzed that the more accurate the position data is extracted without the obstacle in the indoor space.

• Journal of Industrial Convergence
• /
• v.15 no.2
• /
• pp.1-6
• /
• 2017

This paper illustrates key features of an enterprise employment simulation which integrates a system dynamic feedback model with a cost-effectiveness optimisation capability utilising genetic algorithms. Its core is a 3-dimensional array structure tracking staff numbers by rank, by time-in-rank, by years-of-service. The resultant model, which could readily be adapted to non-Defence use, can identify, given user specification of any mix of employment rules, the likely patterns of employment behaviour including: resultant time-in-rank and years-of-service profiles; ability of a Unit to fill all positions to target strength; ability to fill promotional positions within normal rules for substantive promotion; need to fill promotional positions using rules for temporary promotion or transfer from outside; necessary recruitment pattern to sustain target strength.

• KEPCO Journal on Electric Power and Energy
• /
• v.7 no.2
• /
• pp.317-321
• /
• 2021

As the large-scale renewable energy power plant increases, the high-capacity and compact Energy Storage System (ESS) is required. However, this trend could reduce the insulation reliability of ESS. In this study, the surface flashover characteristics for four types of solid insulators are investigated in the uniform electric field with AC and Lightning Impulse (LI) voltage waveforms under various contamination levels. In addtion, insulator surfaces are compared based on the contact angle before and after surface flashover. The experimental results show that AC flashover voltage is dependent on the materials and the contamination level, but LI flashover voltage is only associated with the contamination level. Especially, AC flashover voltage of PC (PolyCarbonate) is higher than that of other insulators, which is associated with the unique and sequential creepage discharge propagation pattern of PC. The localized discharges on the surface of PC form corresponding tracking points. Then, the interconnected trackings result in the complete flashover. This flashover patterns degrade the surface of PC much more than that of epoxy and Bulk Molding Compoud (BMC). Thus, the contact angle of PC is significantly reduced compared to that of other insulators. The increased hydrophilicity in the surface of PC enhances the insulator surface conductivity.

• Journal of Korean Port Research
• /
• v.12 no.1
• /
• pp.95-104
• /
• 1998

Water pollution in a semi-enclosed sea area such as a bay due to stagnancy of water has been a serious water environmental problem. Recently, some kinds of new methods to activate the tidal exchange between an inner bay and an outer sea area by control of a tidal residual current have been proposed. However, these methods have several problems, that is, I). deterioration in a natural view due to building of huge structures, II). increase of risk of navigation in case of a submerged structure, III). limition of sea area where a tidal current can be controlled and IV). difficulty in removing those structures in case of occurrence of an unexpected impact on water environment. In this paper, a new method is proposed, which can solve all the above problems, to purify water quality in a semi-enclosed bay by creation and control of a pattern of a tidal residual current. The tidal residual current is controlled by unsymmetric structures, which change the properties of resistance according to the direction of flow, arranged on the sea bottom. In this study, several numerical and hydraulic experiments of tidal current and particle-tracking for various arrangements of bottom roughness in a semi-enclosed model bay were carried out. As a result of experiments, it becomes clear that it is possible to generate a new tidal residual current and to activate a tidal exchange by only operation of bottom roughness arrangement.

• Korean Security Journal
• /
• no.19
• /
• pp.225-244
• /
• 2009

Electronic security system is composed mainly of electronic-information-communication device, so system technology, configuration and management of the electronic security system could be affected by the change of information-communication environment. This study is to propose the future prospect on the development of technique for electronic security system through the analysis of the trend and the actual condition on the development of technique. This study is based on literature study and interview with user and provider of electronic security system, also survey was carried out by system provider and members of security integration company to come up with more practical result. Hybrid DVR technology that has multi-function such as motion detection, target tracking and image identification is expected to be developed. And 'Embedded IP camera' technology that internet server and image identification software are built in. Those technologies could change the configuration and management of CCTV system. Fingerprint identification technology and face identification technology are continually developed to get more reliability, but continual development of surveillance and three-dimension identification technology for more efficient face identification system is needed. As radio identification and tracking function of RFID is appreciated as very useful for access control system, hardware and software of RFID technology is expected to be developed, but government's support for market revitalization is necessary. Behavior pattern identification sensor technology is expected to be developed and could replace passive infrared sensor that cause system error, giving security guard firm confidence for response. The principle of behavior pattern identification is similar to image identification, so those two technology could be integrated with tracking technology and radio identification technology of RFID for total monitoring system. For more efficient electronic security system, middle-ware's role is very important to integrate the technology of electronic security system, this could make possible of installing the integrated security system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.11
• /
• pp.2594-2603
• /
• 1997

A novel method of adaptive beam forming is presented in this paper. The proposed technique provides for a suboptimal beam pattern that increases the Signal to Noise/Interference Ratio (SNR/SIR), thus, eventually increases the capacity of the communication channel, under an assumption that the desired signal is dominant compared to each component of interferences at the receiver, which is precoditionally achieved in Code Division Multiple Access (CDMA) mobile communications by the chip correlator. The main advantages of the new technique are:(1)The procedure requires neither reference signals nor training period, (2)The signal interchoerency does not affect the performance or complexity of the entire procedure, (3)The number of antennas does not have to be greater than that of the signals of distinct arrival angles, (4)The entire procedure is iterative such that a new suboptimal beam pattern be generated upon the arrival of each new data of which the arrival angle keeps changing due tot he mobility of the signal source, (5)The total amount of computation is tremendously reduced compared to that of most conventional beam forming techniques such that the suboptimal beam pattern be produced at vevery snapshot on a real-time basis. The total computational load for generating a new set of weitht including the update of an N-by-N(N is the number of antenna elements) autocovariance matrix is $0(3N^2 + 12N)$. It can further be reduced down to O(11N) by approximating the matrix with the instantaneous signal vector.