• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.22 no.1
• /
• pp.61-73
• /
• 2012

The paper presents the novel approach to solve some problems occurred in application of the genetic algorithm to the determination of the optimal tire pattern sequence in order to reduce the tire air-pumping noise which is generated by the repeated compression and expansion of the air cavity between tire pattern and road surface. The genetic algorithm has been used to find the optimal tire pattern sequence having a low level of tire air-pumping noise using the image based air-pumping model. In the genetic algorithm used in the previous researches, there are some problems in the encoding structure and the selection of objective function. The paper proposed single encoding element with five integers, divergent objective function based on evolutionary process and the optimal evolutionary rate based on Shannon entropy to solve the problems. The results of the proposed genetic algorithm with evolutionary process are compared with those of the randomized algorithm without evolutionary process on the two-dimensional normal distribution. It is confirmed that the genetic algorithm is more effective to reduce the peak value of the predicted tire air-pumping noise and the consistency and cohesion of the obtained simulation results are also improved in terms of probability.

• Proceedings of the Korea Society of Design Studies Conference
• /
• 2004.05a
• /
• pp.336-337
• /
• 2004

• IE interfaces
• /
• v.10 no.2
• /
• pp.109-114
• /
• 1997

The tread pattern of tire is represented by a great number of design factors, such as groove breadth of circumference direction, breadth direction, rib breadth, block length, kerfs, tread breadth and tread radius, etc. It is not efficient in time and cost to analyze the rolling resistance for a great number of real tread pattern, because It requires lots of pattern forming handwork. In order to optimize tread pattern for rolling resistance, the experiment is planed and analyzed by Taguchi's robust design methods. We identified the important design factors for Rolling Resistance, determined the optimal condition and calculated prediction value which is related. Using the experiment data and the analyzed data, we developed the program which could predict Rolling Resistance. It is expected that time and cost may be reduced in designing and developing new tire tread pattern.

• Proceedings of the KSME Conference
• /
• 2001.11a
• /
• pp.330-335
• /
• 2001

While contacting directly with ground, the tire tread part is in shape of complex patterns of variable ASDs(anti-skid depth) for various tire performances. However, owing to the painstaking mesh generation job and the extremely long CPU-time, conventional 3-D tire analyses have been performed by either neglecting tread pattern or modeling circumferential grooves only. As a result, such simplified analysis models lead to considerably poor numerical expectations. This paper addresses the development of a systematic 3-D mesh generation of tires considering the detailed tread pattern. Basically, tire body and tread meshes are separately generated, and then both are to be combined. For the systematic mesh generation, which consists of a series of meshing steps, we develop in-house subroutines which utilize the useful functions of I-DEAS solid modeler. The detailed pattern mesh can be imparted partially or completely.

• The Journal of the Acoustical Society of Korea
• /
• v.35 no.4
• /
• pp.288-294
• /
• 2016

The space between tire and wheel guard acts as a path for tire pattern noise transmission. In this study, acoustic phenomenon occurring in the tire-wheel guard space is investigated using acoustic mode analysis and visualization of the sound pressure distribution over the wheel guard surface. We introduced a cavity over the wheel guard surface to reduce the tire pattern noise, where the cavity acts as an acoustic damper. The interior noise was reduced by 2 dB(A), and the noise control measures treated in this study may provide an efficient method to improve interior sound quality without increasing cost and weight at the final stage of the vehicle development.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.11a
• /
• pp.690-693
• /
• 2006

As the silence of vehicle is more important, noise reduction of tire is more required. Noise of tire is divided into structure home noise and air borne noise. Tire tread has the property such as Hardness. Pattern Noise is caused by changing of tread hardness. This property has influence on the mechanisms which are Block Impact & Stick-slip sound. In the study, we found that the effect of Hardness is related to more Stick-Slip than Impact.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2007.11a
• /
• pp.563-564
• /
• 2007

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.1237-1240
• /
• 2007

Tire noise is a major noise source at high speeds. One of the noise source is controlled by pattern and structure. Pattern noise is effected by the shape of tread. And the bending stiffness of tire is influenced to the resonance of tire‘s belt. But in high frequency region, FEA is not appropriated with application. So this paper discusses about wave propagation of tire. There has been much effort to verify the flexural wave velocity with structure design specification.

• PNF and Movement
• /
• v.19 no.3
• /
• pp.375-382
• /
• 2021

Purpose: The objectives of the present study were to investigate the disadvantages of tire pressure asymmetry of a wheelchair tire and recommend the criterion for appropriate tire pressure without generating negative changes in the musculoskeletal system in asymptomatic participants. Methods: Fourteen asymptomatic participants were asked to sit in pressure-controlled wheelchairs and perform desk work for 20 minutes in each tire condition. The asymmetry of the tire conditions was set as 0% difference, 25% difference, and 50% difference from the recommended pressure. The pelvic alignment and muscular recruitment represented as a flexion-relaxation ratio (FRR) were measured at pre-test, and after each condition of desk work. The displacement of the center of pressure (COP) was measured during the desk work. Results: The tire air pressure condition significantly affected the FRR and COP (P < 0.05). Both sides of the FRR values were significantly higher under the symmetrical tire conditions (0% difference) and pre-test, compared with the asymmetrical tire condition of 50% difference (P < 0.05). The mediolateral COP displacement of the asymmetrical tire conditions (25% and 50% difference) was significantly higher than that of the symmetrical tire conditions (0%) (P < 0.05). Conclusion: Asymmetrical tire conditions could cause changes in the muscle recruitment pattern of the erector spine and mediolateral COP displacement. Tire pressure asymmetry higher than 50% could be a risk factor for prevalence of back pain, so this level of asymmetry in tire pressures should be cautioned against for wheelchair users.

• The tire
• /
• s.90
• /
• pp.2-8
• /
• 1980

앞으로의 자동차용 타이어 개발방향은 타이어의 Pattern을 변경하거나 또는 승차감을 향상시키는 것도 중요하지만 회전저항이 작은 타이어를 개발하여 에너지를 절약하여야 된다는 것이 더욱 중요한 과제이다.