• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.604-608
• /
• 2007

The INM simulation program is used to estimate the condition of the exposed area to the noise near a military airport in Korea. $WECPNL_k$, the evaluation unit of korean airport noise, is different from the ICAO $WECPNL_I$ that is used in the simulation program. Therefore, it is inappropriate to compare these units each other directly. This study presents method of comparison between them by using $LA_{MAX}$. The aircraft events are classified into three classes, as departure, overfly and approach. In result, the measurement and simulation seemed to be similar at departure and approach pattern. However, overfly pattern had higher errors between measurement and simulation. Finally, it is necessary to examine the method to determine flight events and duration for the $WECPNL_k$ application.

• 한국정보통신학회논문지
• /
• 제18권12호
• /
• pp.3029-3034
• /
• 2014

이 논문은 사람 눈의 공막컬러코드와 공막혈관징후패턴코드 생성에 의한 공막진단시스템 구현에 관한 연구이다. 시스템은 고성능 DSP 영상처리 프로세서를 기반으로 PGC 프로그램어불 게인제어 선처리 및 RISC SD프레임저장 메모리 등으로 구성된다. PGC는 RGB신호를 최적화하고 그래리 영상에서 에지가 검출된다. 판별 및 매칭 처리알고리듬은 공막컬러코드화 및 혈관징후패턴코드 생성을 실행된다. 공막컬러코드는 메모리 맵의 위치에서 YCbCr값을 구하고 허용오차 범위를 적용하여 생성된다. 혈관징후패턴코드는 24시간등분과 13환형등분 구역에 의해 디지털화 되고 중첩매칭과 허용오차 적용에 의해 코드화된다. 실험결과 성능에서 시스템은 40ms로 동작하고 진단오차는 컬러판별이 평균 약20%, 혈관징후패턴 매칭이 약 24%이다. 이 시스템 및 기술은 세분화와 환자데이터베이스화 하면 공막진단 의용시스템으로 사용 할 수 있다.

• 천문학회보
• /
• 제40권2호
• /
• pp.40.1-40.1
• /
• 2015

Off-axis reflective optical systems have attractive advantages relative to their on-axis or refractive counterparts, for example, zero chromatic aberration, no obstruction, and a wide field of view. For the efficient operation of off-axis reflective system, the surface accuracy of freeform mirrors should be higher than the order of wavelengths at which the reflective optical systems operate. Especially for applications in shorter wavelength regions, such as visible and ultraviolet, higher surface accuracy of freeform mirrors is required to minimize the light scattering. In this work, we propose the error compensation algorithm (ECA) for the correction of wavefront errors on freeform mirrors. The ECA converts a form error pattern into polynomial expression by fitting a least square method. The error pattern is measured by using an ultra-high accurate 3-D profilometer (UA3P, Panasonic Corp.). The measured data are fitted by two fitting models: Sag (Delta Z) data model and form (Z) data model. To evaluate fitting accuracy of these models, we compared the fitted error patterns with the measured error pattern.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제6권10호
• /
• pp.2679-2691
• /
• 2012

In this paper, a high accuracy stereo reconstruction method for surgery instruments positioning is proposed. Usually, the problem of surgical instruments reconstruction is considered as a basic task in computer vision to estimate the 3-D position of each marker on a surgery instrument from three pairs of image points. However, the existing methods considered the 3-D reconstruction of the points separately thus ignore the structure information. Meanwhile, the errors from light variation, imaging noise and quantization still affect the reconstruction accuracy. This paper proposes a method which takes the structure information of surgical instruments as constraints, and reconstructs the whole markers on one surgical instrument together. Firstly, we calibrate the instruments before navigation to get the structure parameters. The structure parameters consist of markers' number, distances between each markers and a linearity sign of each instrument. Then, the structure constraints are added to stereo reconstruction. Finally, weighted filter is used to reduce the jitter. Experiments conducted on surgery navigation system showed that our method not only improve accuracy effectively but also reduce the jitter of surgical instrument greatly.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2003년도 춘계학술대회 논문집
• /
• pp.255-259
• /
• 2003

Moire topography method isa well-known non-contacting 3-D measurement method as afast non-contact test for three-dimension shape measuring method. Recently, it's important to study the automatic three-dimension measurement by moire topography because it is frequently applied to the reverse engineering , the medical , the entertainment fields. Three-dimension measurement using projection of moire topography is very attractive because of its high measuring speed and high sensitivity. In this paper, the classical moire method is computerized-so called digital moire when a virtual grating pattern is projected on a surface, the captured image by the CCD camera has three-dimension information of the objects. The moire image can be obtained through a simple image processing and a reference grating pattern. and it provides similar results without physical grating pattern. digital projection moire topography turn out to be very effective for the three-dimension measurement of objects. Using different N-bucket algorithm method of digital projection moire topography is tested to measuring object with the 2-ambiguity problem. Experimental results prove that the proposed scheme is capable of finding measurement errors that decreased more by using the four-three step algorithm method instead of the same step in the phase shifting of different pitch.

• 한국통신학회논문지
• /
• 제34권10B호
• /
• pp.1111-1116
• /
• 2009

본 논문에서는 집적 영상의 획득과 복원을 이용하여 왜곡에 강인한 물체를 인식하는 방법을 연구한다. 해당 화소들의 확률적 특성인 평균과 표준편차를 이용하여 3차원 공간에서 물체를 복원하고 거리를 추정한다. 표적인식은 Fisher 선형판별법(linear discriminant analysis, LDA)과 주성분 분석법(principal component analysis, PCA) 기술을 결합한 통계적 분류기(statistical classifier)로 수행한다. Fisher 선형판별법은 클래스 간의 판별력을 최대로 하고 주성분 분석법은 Fisher 선형판별법을 수행하기 위한 차원축소를 실행한다. 주성분 분석법은 차원축소 후 복원된 벡터와 원 벡터의 오차를 최소화하는 기술로 알려져 있다. 실험 및 시뮬레이션을 통하여 면외(out-of-plane) 회전된 표적을 본 논문에서 제안한 방법으로 분류한다.

• 한국기후변화학회지
• /
• 제6권4호
• /
• pp.389-397
• /
• 2015

The changes in the teleconnection associated with El Nin?o-Southern Oscillation (ENSO) over the East Asia and North Pacific under greenhouse warming are analyzed herein by comparing the Historical run (1970/1971~1999/2000) and the Representative Concentration Pathway (RCP) 4.5 run with 31 climate models, participated in the Coupled Model Intercomparison Project Phase 5 (CMIP5). It is found that CMIP5 models have diverse systematic errors in simulating the ENSO teleconnection pattern from model to model. Therefore, we select 21 models based on the models' performance in simulating teleconnection pattern in the present climate. It is shown that CMIP5 models tend to project an overall weaker teleconnection pattern associated with ENSO over East Asia in the future climate than that in the present climate. It can be also noted that the cyclonic flow over the North Pacific is weakened and shifted eastward. However, uncertainties for the ENSO teleconnection changes still exist, suggesting that much consistent agreements on this future teleconnections associated with ENSO should be taken in a further study.

• Radiation Oncology Journal
• /
• 제29권3호
• /
• pp.206-213
• /
• 2011

Purpose: Intensity modulated radiation therapy (IMRT) is a high precision therapy technique that can achieve a conformal dose distribution on a given target. However, organ motion induced by respiration can result in significant dosimetric error. Therefore, this study explores the dosimetric error that result from various patterns of respiration. Materials and Methods: Experiments were designed to deliver a treatment plan made for a real patient to an in-house developed motion phantom. The motion pattern; the amplitude and period as well as inhale-exhale period, could be controlled by in-house developed software. Dose distribution was measured using EDR2 film and analysis was performed by RIT113 software. Three respiratory patterns were generated for the purpose of this study; first the 'even inhale-exhale pattern', second the slightly long exhale pattern (0.35 seconds longer than inhale period) named 'general signal pattern', and third a 'long exhale pattern' (0.7 seconds longer than inhale period). One dimensional dose profile comparisons and gamma index analysis on 2 dimensions were performed. Results: In one-dimensional dose profile comparisons, 5% in the target and 30% dose difference at the boundary were observed in the long exhale pattern. The center of high dose region in the profile was shifted 1 mm to inhale (caudal) direction for the 'even inhale-exhale pattern', 2 mm and 5 mm shifts to exhale (cranial) direction were observed for 'slightly long exhale pattern' and 'long exhale pattern', respectively. The areas of gamma index >1 were 11.88 %, 15.11%, and 24.33% for 'even inhale-exhale pattern', 'general pattern', and 'long exhale pattern', respectively. The long exhale pattern showed largest errors. Conclusion: To reduce the dosimetric error due to respiratory motions, controlling patient's breathing to be closer to even inhaleexhale period is helpful with minimizing the motion amplitude.

• 정보처리학회논문지B
• /
• 제15B권6호
• /
• pp.533-542
• /
• 2008

동영상에서의 배경제거는 다양한 실시간 머신 비젼 응용에서 매우 중요한 단계이다. 본 논문에서는 이러한 배경제거를 위한 육각화소 기반의 새로운 접근 방법을 제안한다. 일반적으로 육각형 샘플링 영상은 양자화 오차가 적으며, 이웃화소의 연결성 정의를 크게 개선한다고 알려져 있는데, 제안된 방법은 비매개변수형 배경제거 방법의 하나인 지역적 이진패턴 기반 알고리즘에 이러한 육각 샘플링 영상을 적용하는 것을 특징으로 한다. 이를 통해, 지역적 이진패턴의 추출과정에서 필요한 쌍선형 보간을 없애고 계산량을 줄일 수 있었다. 실험을 통해 이러한 육각화소의 적용이 배경제거 분야에 매우 효율적으로 적용될 수 있음을 확인할 수 있었다.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제53권11호
• /
• pp.768-775
• /
• 2004

The SSA technique in the digital circuit test is required to be repeated the input pattern stream to n bits output nodes n times in case of using a multiplexor. Because the method adopting a parallel/serial bit convertor to remove this inefficiency has disadvantage of requiring the test time n times for a pattern, the test strategy is required, which can enhance the test productivity by reducing the test time based on simplified fault detection mechanism. Accordingly, this paper proposes a test strategy which enhances the test productivity and efficiency by appling PAS (Parallel Signature Analysis) technique to those after analyzing the structure and characteristics of the digital devices including TTL and CMOS family ICs as well as ROM and RAM. The PSA technique identifies the faults by comparing the reminder from good device with reminder from the tested device. At this time, the reminder is obtained by enforcing the data stream obtained from output pins of the tested device on the LFSR(Linear Feedback Shift Resister) representing the characteristic equation. Also, the method to obtain the optimal signature analyzer is explained by furnishing the short bit input streams to the long bit input streams to the LFSR having 8, 12, 16, 20bit input/output pins and by analyzing the occurring probability of error which is impossible to detect. Finally, the effectiveness of the proposed test strategy is verified by simulating the stuck at 1 errors or stuck at 0 errors for several devices on typical 8051 digital board.