• Journal of Communications and Networks
• /
• 제1권3호
• /
• pp.166-181
• /
• 1999

The object of this paper is to investigate the influence of antenna pattern on indoor radio channel characteristics. Different from previous works where this analysis was carried out at a fixed frequency using different antennas, in the present paper (where measurements were taken in a wide frequency range) the variation of the radiation pattern was caused by two factors: the change of the radiation pattern when the same antenna was used at different frequenicies and the use of different type of antennas. To carry out this analysis, frequency domain measurements of the indoor radio channel at 1 GHz, 5.5 GHz, 10 GHz and 18 GHz were collected. Measurements were taken using a network analyzer. Serveral re-alizations of the channel transfer function were obtained varying, for each measurement, the positon of the transmitter and keep-ing the receiver fixed. Estimate of the channel impulse response was obtained from the Inverse Fourier Transform (IFT) of the fre-quency response. The measurements were performed in an office enviroment with mostly metallic walls and inner separations. The obtained data were elaborated to obtain the power versus distance relationship, the Cummulative Distribution Functions(CDFs) of rms Delay Spread(DS) and of the 3 dB frequency correlation band-width. Finally, the 3 dB width of the frequency correlation func-tion has been empirically related to the inverse of the rms DS of the impulse response.

• 한국의류학회지
• /
• 제20권1호
• /
• pp.54-65
• /
• 1996

The purposes of this study were 1) to present the optimum slacks pattern for young men, 2) to develope a methodology to draft basic slacks pattern using AutoCAD The total crotch legth and the shape of the crutch line were determined by anthropometric data analysis. The total crotch length was calculated with the waist girth, the hip girth and the crotch length measurements. The anthropometric data utilized for this procedure was National Anthropometric Survey of Korea, 1992. And multidimensional anthropometric measurements were carried out for 6 male college students between the age of 18 to 24. The subjects were measured with the Martin's anthropometer and the sliding gauge. Mean, standard deviation and t-test were performed for statistical analysis of the data. The automatic drafting method was programmed by AutoLISP in AutoCAD. The automatic drafting was based on the Muller's slacks pattern drafting method, the measurements of slacks construction components and the curve of crotch line. The crotch line was drafted using of the arc function in AutoCAD. The total crotch length was calcuated using the multiple regression equation. The experimental pattern developed to accomodate individual body wleasurements expected to produce customized apparel production in QRS(Quick Response System) production system.

• Journal of the Korean Data and Information Science Society
• /
• 제21권6호
• /
• pp.1263-1270
• /
• 2010

60명의 환자들을 20명씩3개 그룹으로 나누어 각 그룹마다 다른 종류의 식이요법을 실시한 후 1주 간격으로 5주간에 걸쳐서 콜레스테롤 수치에 대한 반복측정 자료를 얻었다. 해당자료를 바탕으로 적합성여부와 유의성 검정을 실시한 결과 등분산 Toeplitz가 다양한 공분산행렬 형태들 중에서 가장 적합한 공분산구조 모형으로 판명되었다. 이 모형에서는 시점들 간의 상관계수는 0.64-0.78로 대체적으로 높은 상관관계들을 보여주고 있으며, 모수인자들의 유의성검정 결과, 시간효과는 대단히 유의하게 나타났으나, 처리 및 처리와 시간과의 교호작용효과는 유의하지 않은 것으로 판명되었다.

• 대한가정학회지
• /
• 제20권2호
• /
• pp.73-84
• /
• 1982

The purpose of this study was to develop a basic bodice pattern and establish standards regrading to the size and grading of Korean misses' measurements in order to provide modern data for the ready-to-wear garment industry. 222 girls, aged from 18 to 27, were measured on 19 items of their structure. Mean, standard deviation, coefficient of variance, maximum, minimum, range and correlation coefficient between each items were analized. The analysis revealed the following significant results. The fundamental difference data of the bodice pattern and grading measurements between the year of 1975 and 1981 were as follow. (1) The measurements of bust and center back were used as a foundation to establish a standard size and grading. (2) Ranges of the bust circumference measurements were increased. Thus the sizes ere classfied into 5 groups. (3) The ease of bust circumference was increased due to the increasement of shoulder width. (4) The increase of the upper arm resulted to lower the bust line. (5) The shoulder slopes were higher than 1975. Therefore, the basic measurements of the shoulder slopes were reduced. (6) In spite of the front neck measurements were not changed, the back measurements were requied to increase. (7) the center front length became much shorter in the contrast with the increase of the center back length.

• 대한인간공학회:학술대회논문집
• /
• 대한인간공학회 1993년도 추계학술대회논문집
• /
• pp.205-219
• /
• 1993

The purpose of this study was to determine maximal width of bodice and skirt pattern of 50 college girls for more scientific patternmaking development in clothing construction. The body measurements data of this study was calculated by SAS, means analysis, regression analysis and T-test were used. The results are as follows. 1. The results of analyzing the whole 85 items of the entire body measurements of model are in table 2. 2. It was suggested the whole average cross section of measurement parts by rohrer index as the result of gathering the each section. 3. Representative items were suggested as fundamental parts in determining the maximal width of bodice and skirt basic pattern by rohrer index. 4. The entire abbreviated calculation formula of bodice and xkirt pattern was suggested.

• 한국의류학회지
• /
• 제40권2호
• /
• pp.273-286
• /
• 2016

Protective coveralls are very uncomfortable to work in comparison to ordinary top and bottom separated clothing. A pattern maker has to consider the size of the human body and human motion range when designing protective coverall patterns. It is difficult to produce well-fitted coveralls because of the lack of readymade patterns despite the increased need for protective coveralls at various jobs. Patterns are decomposed by unsewing 18 products in the domestic market to provide the fundamental information on developing patterns for protective coveralls. The characteristics and differences of pattern types are compared after grouping patterns with information taken from the analysis of the shapes and measurements of patterns from the acquired patterns. The results of the analysis showed that on-market protective coveralls were less curved but much linear when compared to ordinary clothing patterns; however, the breasts and crotch circumferences were very loose and bulky, which is quite different from the other all-in one style working clothes. For the pattern shapes, patterns are classified into waistline-seamed and bustline-seamed types. The result of the hierarchical cluster analysis with 27 measurement variables were classified into four groups. Types by shape and measurements were related to each other; therefore, we expect the information of each type to be used in developing protective clothing patterns.

• 한국생활과학회지
• /
• 제10권4호
• /
• pp.379-390
• /
• 2001

The purpose of this study is to investigate the fitness according to drafting method of the block patterns for women in Korea. The major findings of this study are as follows: 1. According to comparative analysis of required measurements, two measurements of back length and bust girth are used in Proportional Drafting Method (Munhwa). In case of Compromise Drafting Methods are used across chest, across back, bust length, bust width, full length in front, across shoulder and shoulder length in addition to back length and bust girth. The type of Armstrong as a Short Measure Drafting Method uses 10 measurements for the drafting the bodice. 2. While Esmod block pattern arid Armstrong's block pattern are the lightest in full width and other widths. Rasara block pattern is the most ample. In Lee, Myung-hee's block pattern and Lee, Hyung-sook's block pattern, amounts of drooping are decided $3{\sim}4cm$, but drooping amounts of other block patterns are decided corresponding to real measurements. While cap height in Esmod and Armstrong's sleeve patterns are directly measured Armhole length of the block pattern, cap height of other sleeve patterns are used armhole depth and cap height length as well as armhole length. 3. When analyzing to indirect measurements, Esmod block pattern shows the least different between full length of block pattern and that of body form. Munhwa block pattern and Kim, Hyosook's block pattern are mostly same to body form back length. However all of the block patterns are sheller than body form length. In case of Suh, Wansuk's block pattern, across back and across chest are same size, but other block patterns show difference between across back and across chest. Most block patterns' neck width in front and bach bodice are almost same. Front neck width is generally bigger than back neck width in some cases.

• 대한인간공학회지
• /
• 제21권3호
• /
• pp.59-79
• /
• 2002

The purposes of the study were to present the optimum slacks pattern for elementary school girls and to compare and evaluate wearing ease of the slacks. 3D scans using the Cyberware PS motion platform were carried out for 3 subjects who have different body type. The automatic drafting method was programmed by AutoLISP in CAD. Wearing tests using 3D Scanner was done for evaluation of fitness of slacks. Regression analysis, analysis of variance and post-hoc test were performed for statistical analysis of the data by SPSS program. The procedure and results were as follows: The slacks construction components for pattern drafting were derived from 10 horizontal section maps obtained from 3D scans. The automatic drafting was based on the measurements of slacks construction components and the curve of crotch line. The crotch line was drafted using of the arc function in AutoCAD. The total crotch length was calculated using the multiple regression equation. Wearing test represented that the slacks pattern developed to accomodate individual body measurements was estimated more highly than existing patterns.

• 한국의류학회지
• /
• 제38권6호
• /
• pp.873-886
• /
• 2014

This study conducted a survey on jean pants that targeted males in the 20s in order to select preferred brands for skinny jean pants. Preliminary data for the pattern development of skinny jean pants was presented through functionality evaluation, appearance evaluation and pattern analysis. The results were as follows. 1. The result of survey targeting males in the 20s to select the design and brand name of jean pants showed that skinny jean pants were selected as the most favorite type of jean pants to wear; in addition, non-brand products and brand names such as Uniqlo and Levi's were also preferred. 2. The result of functionality evaluation showed that L brand received a high score in all items except for items regarding the knee circumference and mid-thigh circumference, S brand received a high score as well as a low score, and N brand received a low score in general. The result of appearance evaluation showed that L brand for the waist height and waist circumference, N brand for the brand crotch circumference, posterior crotch length and knee circumference, and S brand and N brand for the length of pants were preferred. 3. The result of pattern measurements analysis from the result of functionality evaluation showed that L brand provided a large pattern measurement for the waist height, L brand provided less ease due to small pattern measurements for waist circumference; in addition, N brand for the knee circumference and mid-thigh circumference were preferred. 4. The analysis result shows that a ease of 5cm based on the belly band which is 3.5cm below the belt width is proper for the waist circumference when designing a skinny jean pant pattern and 4cm for the hip circumference and 32.5cm for the ease of crotch circumference are proper, -0.4-0cm for the ease of mid-thigh circumference and knee circumference in consideration of human body measurements; therefore, 80.1-80.5cm for inseam as the length from the crotch height to the leg length, 25.7cm for vertical hip length and 53.0cm for crotch length are proper.

• 한국의류산업학회지
• /
• 제12권5호
• /
• pp.650-656
• /
• 2010

To present a 6-piece baseball cap pattern with good wearing sensation and with good reflection of head shape, this study conducted direct measurement using martin's anthropometer and indirect measurement using surgical tape among women of 20 to 24 years old. For a crown, correlation analysis was carried out between direct measurements and surface shell measurements of each section on the head to set main items for prototype design, along with regression analysis to complete design formula; for a cap pattern, draping design was used on the finished crown to compete cap pattern design formula. The results showed that main measurement items to design a baseball cap included head circumstance and bitragion arc for a crown and the cephalic index for a cap. For the crown pattern reflecting the shape of the head, 6 pieces were designed with different sizes and types of front (F), side (S), and back (B) patterns; hemline was also designed diagonally and completed by reflecting the curve of the head.