• 한국의류학회지
• /
• 제33권2호
• /
• pp.187-199
• /
• 2009

Recently, the quality and design of the children's wear is being improved remarkably. Following the trend, the need for the research on the pattern making of children's wear is growing. At first, we tried to find out how the industry is doing the pattern making job through interview. Results are as follows. The target age ranges from 5 to 11 years old. For the sample size of pattern making, 7 years of age is preferred. It is not usual to develop the design pattern from the bodice block pattern. Instead, they use middle block pattern for each item, such as blouse, shirt, pants, skirt or jacket. Starting from these middle block pattern, they prepare individual designs. With the results, the aim of the research became to develop one of most frequently used middle block pattern. The blouse block pattern was selected for that purpose. To look into the existing patterns, we selected 4 methods, i.e. NM-method, T-method, O-method, E-methods. Theses patterns were compared through wearing test for the evaluation of comfort and fit using trial garments. The results indicated the NM-method was best among them. Specially waist line position, shoulder shape and size allowance was adequate. Alteration and adjustment of pattern draft was made onto the NM-method. Allowances for the bust circumference, across chest, across back and depth of arm was adjusted for better comfort as well as fine fit. Sidelines of the bodice and the underarm seam of the sleeves were curved for styling. After another wearing test, the final pattern was suggested as a blouse block pattern for 7 years old girl.

• 복식문화연구
• /
• 제17권6호
• /
• pp.981-991
• /
• 2009

The purpose of this study was to develop the pattern-making for Korean glove. To develop the pattern-making for glove this study comprehensive list of candidate hand data was reviewed and the manufacturers(career over th 15 years) were interviewed on the method of glove. The results of regression analysis(hand data) were as follows (unit: cm): wrist thumb tip length = middle finger length + 3.22, hand bread = 1.25 $\times$ middle finger length + 2.18, middle finger breadth at dist = 0.23 $\times$ index finger circumference + 0.4, maximum hand circumference = 3.15 $\times$ index finger circumference + 4.13, middle finger circumference = 0.91 $\times$ index finger circumference + 0.47, maximum hand thickness = 0.69 $\times$ index finger circumference -0.02. Hand measurements for glove pattern-making were developed: There were palmar hand length, hand circumference, index finger circumference and middle finger length.

• Human Ecology Research
• /
• 제54권3호
• /
• pp.279-292
• /
• 2016

This research predicted the fit of the basic bodice patterns worn on adolescent girls' 3-dimensional scanned bodies. Six 3-dimensional scanned bodies were selected from the sixth Size Korea data. Each of them had good body posture and represented one of the three garment sizes: 79-160, 82-160, and 85-160. Experimental basic bodice patterns were drafted by three basic bodice pattern making methods. The fit of the basic bodice pattern was analyzed by the CLO 3D virtual clothing system. The results showed that the experimental basic bodice patterns did not fit well at the neck, shoulder, and back for adolescent girls. The fit of the basic bodice patterns varied by pattern making method or size. The basic bodice pattern A with the waist darts ending above the breast line showed the best fit among the three different types of experimental pattern. Among the three sizes 79-160, 82-160, and 85-120, size 79-160 basic bodice pattern showed the worst fit for adolescent girls. The results show that the placement and size of the bodice darts affect the basic bodice pattern fit. The basic bodice pattern making method of size 79-160 for adolescent girls should be studied in a future study.

• 한국의류산업학회지
• /
• 제11권1호
• /
• pp.112-120
• /
• 2009

The purpose of this study is to develop Andongpo apparel pattern design connected with the Apparel CAD system. It includes pattern making, grading, marking program. In this study, it will be able to make apparel pattern quickly and accurately by using Apparel CAD system. The results were as following : Computerization of the pattern making process is expected to provide higher accuracy and efficiency in apparel pattern making for narrow and expensive Andongpo. ESMOD pattern making method was selected as basic pattern. Tailored jacket patterns were developed for Andongpo. Refer to and . The jacket patterns developed is automatically depicted by inputting consumer's body size. Tailored jacket patterns for Andongpo were marked by using marking program in Apparel CAD system. The efficiency of marking appeared of 70% or more in Andongpo jacket patterns. This results is showed it has an effect on narrow and expensive Andongpo. 3tailored jacket patterns will be able to make a simulation by 3D Apparel CAD system. The results of this study is expected to provide higher consumer's satisfaction and internet brand launching. In addition, encouraging majority of the young to participate in using CAD program for Andongpo is regarded as beneficial for the reinforcement of competitiveness of traditional clothing business.

• 대한가정학회지
• /
• 제34권2호
• /
• pp.43-55
• /
• 1996

The purpose of this study was to investigate the slacks pattern making on the movement-fitness of the knee region. The experimental items were divided into the lower limb movement (M1~M5) and slacks pattern designs (4 : basic pattern, in-pleats, side-pleats, seam-line increase). This study was done by clothing pressure test, sensory evaluation test and the difference shape-transformation of wearing-slacks. The summarized finding resulted from experiments and investigation are suggested as follows ; First, the clothing pressure test showed that the order of clothing pressure in the movement was the rabbit leap movement (M3), the sit on knees (M4), the nobleman sitting (M5), the sit on chair (M2) from the highest to the lowest. In the comparison of clothing pressure tested by blocks of lower-limb, center front knee region shows the highest of 300g/cm2. In it by constructional methods, the clothing pressure of in-pleats, side-pleats methods shows lower than basic pattern, hem-line increase methods. Also in comparison of the two methods, in-pleats method shows lower than side-pleats method. Second, by the sensory evaluation test based on the lower-limb movements and constructional methods of slacks, it was found that the functional factor score of the rabbit leap movement was also the waist, hip, knee region was the lowest in all blocks. And in the comparison of constructional methods, in-pleats method was the highest in all methods. Third, in consideration of the difference in the shape-transformation of wearing-slacks on the movement-fitness, pleats pattern design methods showed that the ratio of shape-transformation was lower than basic on seam-line increase methods. But the difference of the side-pleats and in-pleats methods was litle. According to these investigation, the slacks pattern making caused by movement-fitness on the knee region, in-pleats design method was the functional slacks pattern.

• 대한조선학회논문집
• /
• 제60권2호
• /
• pp.76-85
• /
• 2023

The present study aims to review the wave pattern resistance analysis method suggested by the International Towing Tank Conference. From the experimental database of a container carrier ship model, the wave pattern measurement and resistance test results are utilized. The wave pattern resistance at the design Froude number is obtained to be compared with the wave making resistance of experiments. Wave pattern resistance is lower than wave making resistance by 1978 ITTC and uniform regardless of transverse location of wave cut. The method is also applied to the wave height field by Computational Fluid Dynamics (CFD) analyses with Froude number variation. Although numerical damping suppressed waves in downstream, waves around the hull and wave pattern resistance are properly predicted.

• 복식문화연구
• /
• 제12권2호
• /
• pp.262-278
• /
• 2004

The purpose of this study was to develop the sizing system fur women's glove. The combination of anthropometric and engineering aspects of glove pattern-making is difficult problem in engineering clothing. And the traditional measurements is not enough for glove. Therefore, to develop the hand measurement method and dimension for glove, a comprehensive list of candidate measurements was reviewed and the manufacturers (Their career was over the 15years.) were interviewed on the method of glove pattern-making. This study was conducted traditional and creative 88 two-dimensional anthropometric measurements and 4 photometric measurements for glove pattern-making. In addition, 16 creative measurements were instrumented using a special hand measuring board for measuring of landmark locations on the hand. The subjects were 260 women's right hand in the age group of 18 to 35 years old in Korea.

• The International Journal of Costume Culture
• /
• 제6권2호
• /
• pp.126-133
• /
• 2003

The purpose of this study was to develop the sizing system for men's glove. The combination of anthropometric and engineering aspects of glove pattern-making is difficult problem in engineering clothing. And the traditional measurements is not enough for glove. Therefore, to develop the hand measurement method and dimension for glove, a comprehensive list of candidate measurements was reviewed and the manufacturers (Their career was over the 15years) were interviewed on the method of glove pattern-making. This study was conducted traditional and creative 88 two-dimensional anthropometric measurements and 4 photometric measurements for glove pattern-making. In addition, 16 creative measurements were instrumented using a special hand measuring board for measuring of landmark locations on the hand. The subjects were 260 men's right hand in the age group of 18 to 35 years old in korea.

• 한국의류학회지
• /
• 제33권2호
• /
• pp.266-275
• /
• 2009

Variations of individual hip shapes are a major obstacle in pattern making for fitness. The drafting method is used for pattern making in today's apparel industry. Whilst catering to a limited number of information such as waist and hip sizes, this method does not cater to variations in hip shape. This paper describes the analysis of hip shapes using 3D body model and tries to make sure the relationship between hip shape and pattern by calculating hip angle and dart amount. We achieved results in analyzing various hip shapes by extracting hip angle. Moreover, various hip shapes can be divided into three types(A, B and C) by the hip angle value($K_{sh}-K_{wsh}$). When we use computerized draping method to make a personalized pattern for a tigth skirt, we easily create complex dart lines automatically. Therefore we achieve the result of individual dart amount such as distance between dart lines and dart areas. C type of hip shape had short dart length, long distance between dart lines and a large amount of dart area. On the other hand, A type had long dart length, short distance between dart lines and small amount of dart area. B type had long length and long distance between dart lines and large amount of dart area. In traditional pattern making, distance between dart lines is usually proportional to amount of dart area because of similarity in dart line shape. In our pattern, there is no proportional relationship between dart line distance and dart area. This means that variations in hip shapes result in a wide variety of dart line curvature resulting in a wide range of dart area. By ensuring an accurate relationship between hip shape and pattern, it is possible to make patterns which result in clothing that not only fits well, but also exhibits other desirable properties.

• 대한가정학회지
• /
• 제35권4호
• /
• pp.159-172
• /
• 1997

The purpose of this study was to investigate the slacks pattern making on the movement -fitness of the hip region. The experimental items were divided into the 5 lower limb movements(M1-M5) and the 12 revision pattern constructions of slacks. This study was done by clothing pressure test sensory evaluation test and the difference shape-transformation of wearing-slacks. The summarized finding resulted from experiments and investigation are suggested as follows: First by the clothing pressure tested by lower limb movements the clothing pressure score of the rabbit leap movement(M3) was the highest of all lower limb movements and the order of it in the another movement was the sit on knee(M4) the sit on chair(M2) the noble sitting(M5) from the highest to the lowest. And in comparision of clothing pressure tested by revision pattern to cover the extend of crotch-length 20。 inclined back-line construction method (CA4) showed the lowest. And in comparision of clothing pressure tested by revision pattern to cover the extend of crotch-length 20。 inclined back-line construction method (CA4) showed the lowest. And also for a role to cover hip circumference extendign CC4(1/5 hip.1cm longrightarrow linked back -line) method showed the lowest. Second by the sensory evaluation test based on the movement and revision patterns it was found that the functional factor score of the rabbit leap movement was the lowest in all movement however the score of revision patterns were higher than basic pattern. Third by the test to show difference in the shape-transformation of wearing-slacks on chair(M2) also need to be analyzed. The ration of the shape-transformation of the knee region showed the least value in the increased patterns of inclined angle of back-line(CA) and the differential methods of back-line inclined pattern making. But that of the hem-line did not show remarkable difference.