• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.53 no.11
• /
• pp.596-603
• /
• 2004

This paper proposes an expert system based on the pattern recognition method which can enhance the accuracy and effectiveness of real-time bus reconfiguration strategy for the transfer of faulted load when a main transformer fault occurs in the automated substation. The minimum distance classification method is adopted as the pattern recognition method of expert system. The training pattern set is designed MTr by MTr to minimize the searching time for target load pattern which is similar to the real-time load pattern. But the control pattern set, which is required to determine the corresponding bus reconfiguration strategy to these trained load pattern set is designed as one table by considering the efficiency of knowledge base design because its size is small. The training load pattern generator based on load level and the training load pattern generator based on load profile are designed, which are can reduce the size of each training pattern set from max L/sup (m+f)/ to the size of effective level. Here, L is the number of load level, m and f are the number of main transformers and the number of feeders. The one reduces the number of trained load pattern by setting the sawmiller patterns to a same pattern, the other reduces by considering only load pattern while the given period. And control pattern generator based on exhaustive search method with breadth-limit is designed, which generates the corresponding bus reconfiguration strategy to these trained load pattern set. The inference engine of the expert system and the substation database and knowledge base is implemented in MFC function of Visual C++ Finally, the performance and effectiveness of the proposed expert system is verified by comparing the best-first search solution and pattern recognition solution based on diversity event simulations for typical distribution substation.

• Journal of Environmental Science International
• /
• v.29 no.4
• /
• pp.361-369
• /
• 2020

With the increasing role of environmental design in promoting urban safety, new design attempts have been made to improve pedestrian safety in crosswalks. This study proposes an evidence-based design solution for improving crosswalk function by conducting simulations and field experiments. Drivers with more than one-year driving experience participated in this study. Four different crosswalk design patterns were prepared: (1) a zebra pattern, (2) zebra pattern with colored triangles, (3) 3D pattern, and (4) art pattern with unique colors and design. The results supported that the zebra pattern with colored triangles could be the most effective solution for crosswalk design by increasing visibility, attention, deceleration, and landscape aesthetics. This study provided objective data to support the performance of various crosswalk patterns and suggested the need to reevaluate the present crosswalk design guidelines.

• Journal of the korean Society of Automotive Engineers
• /
• v.14 no.2
• /
• pp.65-75
• /
• 1992

An analytical scheme for predicting the crack aspect pattern of materials which contain twin surface cracks was developed. Fatigue tests were performed on twin surface cracked PMMA plate specimens to obtain the interaction factor accounting for the interference effect of adjacent cracks. Here, the interaction factor is defined as the ratio of the stress intensity factor for twin surface cracks to that for a single surface crack. From the analysis of the fatigue test result, the interaction factor was presented as the ninth-order polynomial expression having a function of dimensionless crack spacing ratio. Then the polynomial expression was incorporated into the prediction program of the crack aspect pattern for twin surface cracked materials. And, the interaction effect and the coalescence condition of adjacent cracks were simplified in the newly developed prediction scheme of the crack aspect pattern. The predicted crack growth pattern using the prediction scheme was compared with test data from PMMA specimen. The predicted pattern agreed well with the test data.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.10
• /
• pp.1554-1560
• /
• 1989

This paper suggests the algorihtm which extracts the classification parameter relative to the only feature of document patterns even though they are rotated or scaled, and also classifies them. With the complex logarithmic conformal mapping, the sample of the document pattern image makes the pattern image of the complex logarithmic plane. Because the power spectrum of this plane is invariant to the rotation, and scale of the pattern image, it is used as the characteristics parameter of the patten image. By using the coherence function, this method analyzes the standard and input power spectrum. additionally, it classifies the input pattern image. Even though input image is rotated, our algorithm can classify it without reference to the rotation, and this is possible when the scale is in the range of 0.5-1.5.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.10
• /
• pp.1335-1343
• /
• 1999

This paper presents concrete pattern recognition method to identify the strength of concrete by evidence accumulation with multiple parameters based on artificial intelligence techniques. At first, zero-crossing(ZCR), mean frequency(MEANF), median frequency(MEDF) and autoregressive model coefficient(ARC) are extracted as feature parameters from ultrasonic signal of concrete. Pattern recognition is carried out through the evidence accumulation procedure using distance measured with reference parameters. A fuzzy mapping function is designed to transform the distances for the application of the evidence accumulation method. Results are presented to support the feasibility of the suggested approach for concrete pattern recognition.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.21 no.4
• /
• pp.17-23
• /
• 1984

A model analysis of pattern shift in the epitaxial growth of silicon on (111) substrates was performed. The growth rate anisotropy was considered as the most important affecting factor of pattern shift, and for the model establishment the off angle of the substrate and the process temperature were taken as the variables. We derived a theoretical equation of pattern shift by assuming the growth rate anisotropy as the trigonometric sine function of the off angle of the substrate and defining the growth rate anisotropy factor related to the process temperature. The pattern shift ratio calculated by this model had the same tendency with the experimental ones, which, however, were about twice greater than those. It was supposed that this discrepailcy was due to the second order affecting factor such as facetting and step broadening which had been exluded in model establishment.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10b
• /
• pp.61-64
• /
• 1992

In this paper, a visual pattern recognition system is proposed, which can recognize both a pattern and its location. This system, referred to as the expanded neocognitron, has the following capabilities: (1) A higher performance in extraction of features, and (2) A new capability for recognizing the locations of patterns. This system adopts the learning and recognizing mechanism of the neocognitron. First, the ability to classify pattern is enhanced by improving the mechanisms of feature extraction and learning algorithm. Second, the function of detecting the location of each pattern is realized by developing an architecture which does not reduce structure, i.e., the unit density is constant all the way from the input stage to the output stage.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.5
• /
• pp.188-202
• /
• 2004

This research was designed to investigate biomechanical aspects of the evolution based on the hypothesis of dynamic cooperative interactions between the locomotion pattern and the body shape in the evolution of human bipedal walking The musculoskeletal model used in the computer simulation consisted of 12 rigid segments and 26 muscles. The nervous system was represented by 18 rhythmic pattern generators. The genetic algorithm was employed based on the natural selection theory to represent the evolutionary mechanism. Evolutionary strategy was assumed to minimize the cost function that is weighted sum of the energy consumption, the muscular fatigue and the load on the skeletal system. The simulation results showed that repeated manipulations of the genetic algorithm resulted in the change of body shape and locomotion pattern from those of chimpanzee to those of human. It was suggested that improving locomotive efficiency and the load on the musculoskeletal system are feasible factors driving the evolution of the human body shape and the bipedal locomotion pattern. The hypothetical evolution method employed in this study can be a new powerful tool for investigation of the evolution process.

• ETRI Journal
• /
• v.41 no.5
• /
• pp.619-625
• /
• 2019

In this paper, we propose an array pattern synthesis scheme using semidefinite programming (SDP) under array excitation power constraints. When an array pattern synthesis problem is formulated as an SDP problem, it is known that an additional rank-one constraint is generated inevitably and relaxed via semidefinite relaxation. If the solution to the relaxed SDP problem is not of rank one, then conventional SDP-based array pattern synthesis approaches fail to obtain optimal solutions because the additional rank-one constraint is not handled appropriately. To overcome this drawback, we adopted a bisection technique combined with a penalty function method. Numerical applications are presented to demonstrate the validity of the proposed scheme.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.43 no.2
• /
• pp.204-214
• /
• 2019

A CAD program has recently been introduced that can be directly developed into a three-dimensional human body shape and made into a pattern. It is possible to fabricate a bra that reflects the volume and surface area of the breast; however, it still needs to be verified. This study investigates the average size and shape of 20 big-breasted women and designs a brassiere pattern for women with large breasts using a 3D Flattening function of OptiTex PDS v15.6. In addition, the study verifies the reliability of the proposed method compared to a conventional brassiere pattern. The study results are as follows. First, the three dimensional measurement values were smaller than the direct measurement dimensions when the three dimension measurement dimensions of the subjects were compared with the direct measurement dimensions, the replica measurement dimensions and the three dimensional measurement dimensions. Second, the 3D flattening pattern reflects the actual shape, length, and area of the actual breast when comparing a brassiere pattern using a 3D shape and pattern reflecting the direct measurement.