• Korean Journal of Social Welfare
• /
• v.68 no.3
• /
• pp.127-147
• /
• 2016

The purpose of this study was to examine the impact of 10-year psychosocial rehabilitation services provided by a psychosocial rehabilitation center on the quality of life for the mentally ill. The data were collected from a psychosocial rehabilitation center located in Daegu metropolitan area using a quasi-experimental study design. The experimental group consisted of 23 mentally ill subjects and the comparison group consisted of 23 mentally ill subjects that did not use the mental health services voluntarily. The quality of life were measured at baseline and every year over 10-year period. The collected data were analyzed using Hierarchical Linear Modeling(HLM). The findings of this study were as follows: First, it was found that the psychosocial rehabilitation services were effective increasing experimental group's quality of life outcomes. Second, the analyses indicated that the psychosocial rehabilitation services' effectiveness could be maintained at least 10 years indicating that the services had a long-term positive impact on the mentally ill. Third, it was revealed that the experimental group's quality of life outcomes improved over time showing a curvelinear shape rather than showing a linear pattern. The psychosocial rehabilitation services provided by a psychosocial rehabilitation center were positively affected the quality of life as well as maintained at least 10 years for the mentally ill. Finally, the implications and limitations of these findings were discussed.

• The Journal of Korean Academy of Prosthodontics
• /
• v.58 no.3
• /
• pp.228-238
• /
• 2020

In order to deliver fixed partial denture to a patient successfully, dentist must take into many considerations beforehand. Patient's occlusal pattern should be fully understood before delivering any type of prosthesis, whether it's canine guidance or group function occlusion. In order to do so, movement of mandible should be recorded precisely. Introduced by Meyers in 1933, functionally generated path technique (FGP) has been successfully used to record mandibular movement with various materials, such as wax, and utilize it in fabricating precise prosthesis. In the following cases, patients showed secondary caries or endodontic-periodontic lesion on maxillary molars. Root canal treatment and subgingival curettage were done for each patient. Since the long term prognosis of each tooth was questionable, lateral force should be minimized. In order to do so, FGP technique was used to record mandibular movements precisely. Instead of using conventional plaster impression, intra-oral scanning of wax tracing was done to fabricate prosthesis efficiently. After delivery of fixed partial denture, favorable outcome was obtained.

• The Journal of the Acoustical Society of Korea
• /
• v.34 no.1
• /
• pp.20-35
• /
• 2015

Underwater acoustic channel impulse responses (CIR) are influenced by sound speed profile (SSP), and the variation of CIR has significant effects on the performance of underwater acoustic communication systems. A significant change of SSP can occur within a short period, which must be considered during the design of underwater acoustic modems. This paper statistically analyzes the effect of the variation of SSP on the long-range acoustic signal propagation in shallow-water with thermocline using numerical modeling based on the data acquired from JACE13 experiment near Jeju island. The analysis result shows that CIR changes variously according to the SSP and the depth of the transmitter and receiver. We also found that when the transmitter and receiver are deeper, the variation of sound wave propagation pattern is smaller and signal level becomes higher. All CIR obtained in this study show that a series of bottom reflections due to downward refraction and small bottom loss in the shallow water with thermocline can be very important factor for long-range signal transmission and the performance of underwater acoustic communication system in time varying ocean environment can be very sensitive to the variation of SSP even for a short period of time.

• The Research Journal of the Costume Culture
• /
• v.4 no.2
• /
• pp.113-124
• /
• 1996

This research was designed to find out what is a distictive feature of the design elements of Korean women's costume and its influence by analizing the trend of Korean women's constume during the period of 1890 and 1995. The research was analized by a total of 854 random samples of clothing styles collected from materials in the museums and from articles of three leading newspapers and one of the best women's magazines in Korea. The changing trend of Korean women's costume was found out to be as follows: 1. In around 1910s, the trend of Korean women's costume has been changed into two-tier structure of both Korean and Western styles, and the typical and traditional Korean women's street wears such as 'Chang-ot' and 'Tsdechima' have been gradually diminished. 2. From 1920s, length of the Korean skirt, which was unnecessarily long and inconvenient, has been getting shorter for the convenience of walking. In addition, Korean women's underwear has become simplified, and sports wear could be seen for the first time in Korea. 3. During 1960s, the Western clothing styles have been increased rather than Korean styles as the street wear of the Korean women. 4. In 1970s, blue jeans, mini-skirts and casual wears have become a trend or fashion for women in Korea. 5. In 1980s, a fashion of unisex mode has arrived in this country, and from the year of 1987, wearing of panties among the Korean women has been increased rather than skirts wearing for the street wear. 6. During 1990s, various forma of complex styles came into being in such styles as so-called 'orange class style,' 'protruding navel T-shirts' and 'runner wear speedy.' From mid-1990s, Korean women have turned out to prefer the cute and light costumes by placing emphasis on the image of intellectual, professional and functional wears. The changing special feature of the Korean women's clothing designs could be distinctively observed during 1960s as the modernization policies in Korea have been processed during the period. The clothing trend before 1960 was to change and to solve problems of inconvenient and impractical wears, but the trend after 1960 was seen as a change to confirm a trend of the world fashion. From mid-1990s, however, preference of Korean women's self-conceited conception socially and an unquestionable changing pattern of Korean women's life.

• Elastomers and Composites
• /
• v.41 no.3
• /
• pp.194-204
• /
• 2006

The effects of the particle size and the structure of carbon blacks on the friction and the wear behavior of filled natural rubber were investigated in this study. The particle size and the structure of carbon black had a significant effect on the wear rates and the worn surface pattern, and the effect of them on abrasion resistance should be considered for the optimum design of desired wear properties. Ten carbon blacks with various sizes and structures are mixed with natural rubber in order to investigate the effects on the wear rate ($W_R$). The friction and the wear behavior were examined by self-made blade type friction-wear abrader, and the ,elation with characteristic parameter (${\psi}=\sqrt{{N_2^2}+{DBP^2}}$), obtained from the particle size and the structure, was studied. The wear rate ($W_R$) had a Power Law relation with the frictional work ($W_f$) and it was inversely proportional to the characteristic parameter of carbon black. It means that smaller particle size and better structure development of carbon black resulted in improved abrasion resistance.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.11 s.114
• /
• pp.1021-1029
• /
• 2006

In this paper, we designed and implemented a dual wideband dipole type antenna for the reception of S-DMB (Satellite Digital Multimedia Broadcasting) and 2.4/5 GHz WLAN(Wireless Local Area Network) signals. The proposed antenna based on conventional monopole type dual band antenna was implemented as planar wideband dipole type antenna with the volume of $8{\times}33.8{\times}1.68mm^3$. The proposed antenna is printed type on FR4 substrate of 1.6 mm thick and composed of a dipole type antenna for low frequency band and two symmetric structured resonance elements for high frequency band. We confirmed antenna area with dense surface current for each frequency band with simulation. By varying the length of the antenna area with dense surface current, we could vary resonance frequency of each frequency band separately. Impedance bandwidths$(VSWR{\leq}2)$ are 362 MHz(14.23 %) for 2 GHz band and 1188 MHz(22.13, %) for 5 GHz band which show wideband characteristic. Measured maximum gains were 4.33 dBi for 2 GHz band and 5.48 dBi for 5 GHz band which showed improved performance. And the implemented antenna has a good omni-directional radiation pattern characteristic.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.34 no.3
• /
• pp.1-17
• /
• 2016

The main aim of this study is to provide an overview of the characteristics the Oungak (五雲閣) area on the north of rear garden of Gyeongbokgung Palace which was constructed during the time of king Kojong. This study also consider the aspect of functional elements of Ocryucheon (玉流川) located in Changdeokgung Palace and how the Oungak area was used as a substitute for the Ocryucheon. The Oungak area is the private space of the king. It was built in a natural setting which used existing environment including spring water and the rock carved with inscriptions 'Cheonha-Jaeil-Bokji (天下第一福地). King Kojong tried to replace Ocryucheon with Oungak area which had played a important role of relaxation and leisure for royal family at the Ocryucheon to reconstructed Gyeongbokgung Palace. Despite being away from each other, Oungak area seems quite similar to Ocryucheon area. Oungak area and Ocryucheon have a common conditions of a location and structure of the building. Both constructed on the northernmost part of rear garden, composition of buildings and the design of waterway estimated to function as Curve-Stream Banquet. Oungak area was consisted of Ocryeonjeong (玉蓮亭) Pavilion, Oungak Building, Byeokhwasil (碧華室) Building and Cheonha-Jaeil-Bokji-Cheon (天下第一福地泉) Spring and Streams. Except Byeokhwasil Building, spatial compositions of Oungak area showed pattern that were similar to Ocryucheon area. The area was developed, moreover, to unconventional space that depended on the conditions of topography, slope, water system. First, The Ocryeonjeong Pavilion constructed to view the landscape of Seoul to Namsan Mountain. Second, the peculiar form of Cheonha-Jaeil-Bokji-Cheon Streams is estimated the shape imitated from Curve-Stream Banquet on Ocryuchon. Third, Oungak Building was constructed like a habitable house with Nongsanjeong Building in Ocryucheon. The Oungak area was constructed to improve Gyeongbokgung Palace, Consequently, the Oungak area specially characteristic of Joseon palaces's rear garden.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.38 no.2
• /
• pp.31-41
• /
• 2020

Since its foundation in the unified Silla period, Sunam Temple in Jeollanam-do has well preserved its reputation as a representative temple in Honam. However, during the course of history as the temple went through many changes and development, much of its landscape identity were lost or damaged. At present, we found that some of distinctive features as traditional Korean temple are lost or damaged in Sunam temple and in some cases, Japanese style features were applied which calls for urgent restoration to the original landscape style. We found that vegetation pattern of Sunam temple was quite different from those of traditional Korean temples and garden components were rather similar to Japanese garden style. There are two reasons why these changes occurred to Sunam-temple. The first reason is changes made to the temple by Japanese people during the Japanese occupation period in Korea. The second is the renovation effort of the entire temple in 1976. The study aimed to examine landcape changes of Sunam temple in detail and understand Japanese style landscape components and methods applied to the Sunam temple to untimately understand landscape identity of Sunam temple. On-site research, literature research and interviews with monks were conducted and we found that Sunam-sa Temple was significantly influenced by the landscape style of Japan, and that more Japanese-style landscapes were produced while trying to hide these elements. However, this study was limited in understanding the very original landscape form of Sunam temple before the Japanese coloniral era.

• Journal of KIISE:Software and Applications
• /
• v.29 no.9
• /
• pp.676-683
• /
• 2002

The success of XML(eXtensible Markup Language) is primarily based on its flexibility : everybody can define the structure of XML documents that represent information in the form he or she desires. XML is so flexible that XML documents cannot be automatically provided with an underlying semantics. Different tag sets, different names for elements or attributes, or different document structures in general mislead the task of classifying and clustering XML documents precisely. In this paper, we design and implement a system that allows checking the semantic-based similarity between XML tags. First, this system extracts the underlying semantics of tags and then expands the synonym set of tags using an WordNet thesaurus and user-defined word library which supports the abbreviation forms and compound words for XML tags. Seconds, considering the relative importance of XML tags in the XML documents, we extend a conventional vector space model which is the most generally used for document model in Information Retrieval field. Using this method, we have been able to check the similarity between XML tags which are represented different tags.

• The KIPS Transactions:PartD
• /
• v.17D no.1
• /
• pp.1-8
• /
• 2010

Association rule mining techniques enable us to acquire knowledge concerning sales patterns among individual items from voluminous transactional data. Certainly, one of the major purposes of association rule mining is utilizing the acquired knowledge to provide marketing strategies such as catalogue design, cross-selling and shop allocation. However, this requires too much time and high cost to only extract the actionable and profitable knowledge from tremendous numbers of discovered patterns. In currently available literature, a number of interest measures have been devised to accelerate and systematize the process of pattern evaluation. Unfortunately, most of such measures, including support and confidence, are prone to yielding impractical results because they are calculated only from the sales frequencies of items. For instance, traditional measures cannot differentiate between the purchases in a small basket and those in a large shopping cart. Therefore, some adjustment should be made to the size of market baskets because there is a strong possibility that mutually irrelevant items could appear together in a large shopping cart. Contrary to the previous approaches, we attempted to consider market basket's size in calculating interest measures. Because the devised measure assigns different weights to individual purchases according to their basket sizes, we expect that the measure can minimize distortion of results caused by accidental patterns. Additionally, we performed intensive computer simulations under various environments, and we performed real case analyses to analyze the correctness and consistency of the devised measure.