• Korean Journal of Food Science and Technology
• /
• v.26 no.2
• /
• pp.162-166
• /
• 1994

A rapid gas chromatographic (GC) profiling method for the simultaneous analysis of volatile and nonvolatile organic acids was applied to alcoholic beverages (white wine, red wine, brandy, and beer). It involves the solid-phase extraction of organic acids using Chromosorb P as the sorbent and diethyl ether as the eluent with subsequent triethylamine treatment. The resulting triethylammonium salts of acids were directly converted to volatile tert.-butyldimethylsilyl derivatives, which were analyzed by dual-capillary column GC and GC-mass spectrometry. From the alcoholic beverages studied, more than 29 organic acids were detected. When the simplified retention infer (RI) spectra of organic acids, and the direct comparisor method between alcoholic beverages and a test sample were attempted to identify a test sample, it was quickly recognized to be a red wine with the 998 ppt match quality value.

• Journal of Korean Society for Geospatial Information Science
• /
• v.17 no.3
• /
• pp.71-79
• /
• 2009

We expanded the 3D building information extraction method using shadow and vertical line from single high resolution image with meta information into the method for single high resolution image without meta information. Our method guesses an azimuth angle and an elevation angle of the sensor and the sun using reference building, selected by user, on an image. For test, we used an IKONOS image and an image extracted from the Google Earth. We calculated the Root Mean Square (RMS) error of heights extracted by our method using the building height extracted from stereo IKONOS image as reference, and the RMS error from the IKONOS image and the Google Earth image was under than 3 m. We also calculated the RMS error of horizontality position by comparison between building position extracted from only the IKONOS image and it from 1:1,000 digital map, and the result was under than 3 m. This test results showed that the height pattern of building models by our method was similar with it by the method using meta information.

• Tuberculosis and Respiratory Diseases
• /
• v.71 no.3
• /
• pp.188-194
• /
• 2011

Background: When patients with chronic respiratory symptoms have a normal spirometry result, it is not always easy to consider bronchial asthma as the preferential diagnosis. Forced expiratory flow between 25% and 75% of vital capacity ($FEF_{25{\sim}75%}$) is known as a useful diagnostic value of small airway diseases. However, it is not commonly used, because of its high individual variability. We evaluated the pattern of bronchodilator responsiveness (BDR) and the correlation between $FEF_{25{\sim}75%}$ and BDR in patients with suspicious asthma and normal spirometry. Methods: Among patients with suspicious bronchial asthma, 440 adult patients with a normal spirometry result (forced expiratory volume in one second [$FEV_1$]/forced vital capacity [FVC] ${\geq}70%$ & $FEV_1%$ predicted ${\geq}80%$) were enrolled. We divided this group into a positive BDR group (n=43) and negative BDR group (n=397), based on the result of BDR. A comparison was carried out of spirometric parameters with % change of $FEV_1$ after bronchodilator (${\Delta}FEV_1%$). Results: Among the 440 patients with normal spirometry, $FEF_{25{\sim}75%}%$ predicted were negatively correlated with ${\Delta}FEV_1%$ (r=-0.22, p<0.01), and BDR was positive in 43 patients (9.78%). The means of $FEF_{25{\sim}75%}%$ predicted were $64.0{\pm}14.5%$ in the BDR (+) group and $72.9{\pm}20.8%$ in the BDR (-) group (p<0.01). The negative correlation between $FEF_{25{\sim}75%}%$ predicted and ${\Delta}FEV_1%$ was stronger in the BDR (+) group (r=-0.38, p=0.01) than in the BDR (-) group (r=-0.17, p<0.01). In the ROC curve analysis, $FEF_{25{\sim}75%}$ at 75% of predicted value had 88.3% sensitivity and 40.3% specificity for detecting a positive BDR. Conclusion: BDR (+) was not rare in patients with suspicious asthma and normal spirometry. In these patients, $FEF_{25{\sim}75%}%$ predicted was well correlated with BDR.

• Applied Microscopy
• /
• v.32 no.2
• /
• pp.163-170
• /
• 2002

Experimatal maxillary sinusitis was induced in New Zealand white rabbits by blocking the maxillary sinus ostium. The distribution of lectin receptors was explored in the mucosa with induced maxillary sinusitis using colloidal gold label complex with lectin WGA purified from wheat germ (Triticum vulgaris). The lectin WGA gold complex, shown to recognize GlcNac (N-acetylglucosamine) and NeuNAc (N-acetylneuraminic acid) regions, was applied to detect binding sites in Lowicryl HM 20 sections and viewed under the electron microscope. An increased height of the cylindric cells, ciliary loss and hyperplasia of the secretory cells were observed. Examination of normal sinus mucosa labeled with gold-labeled lectins showed the distribution of sialoglycoconjugates to be mainly in the ciliary layer and the granules in the secretory cells. Inflamed mucosa had increased labeling intensity of gold-labeled WGA in the cilia and the secretory granules. These results indicate that lectin WGA receptors are located in the cilia and secretory granules. Specific changes in the lectin binding pattern were apparent in the inflamed mucosa in the experimentally induced acute sinusitis, in comparison with normal mucosa, conceivably as a part of host defense reactions.

• Proceedings of the Botanical Society of Korea Conference
• /
• 2002.04a
• /
• pp.62-72
• /
• 2002

This study has investigated the biosynthesis and function of the heavy metal binding peptides, the phytochelatins, in plants. PCs are synthesised enzymatically from glutathione by the enzyme PC synthase in the presence of heavy metal ions. Using Arabidopsis thaliana as a model organism cadmium-sensitive, phytochelatin-deficient mutants have been isolated and characterised in previous studies. The cadl mutants have wildtype levels of glutathione, are PC deficient and lack PC synthase activity. Thus, the CADl gene has been proposed to encode PC synthase. The CADl gene was isolated by a positional cloning strategy The gene was mapped and a candidate identified. Each of four cadl mutants had a single base pair change in the candidate gene and the cadmium-sensitive, cadl phenotype was complemented by the candidate gene. This demonstrated the CADl gene had been cloned. A homologous gene in the fission yeast, Schizosaccharomyces pombe was identified through database searches. A targeted-deletion mutation of this gene was constructed and the mutant, like cadl mutants of Arabidopsis, was cadmium-sensitive and PC-deficient. A comparison of the redicted amino acid sequences reveals a highly conserved N-terminal region Presumed to be the catalytic domain and a variable C-terminal region containing multiple Cys residues proposed to be involved in activation of the enzyme by metal ions. Similar genes were also identified in animal species. The Arabidopsis CADl/AtPCSl and S. pombe SpbPCS genes were expressed in E. coli and were shown to be sufficient for glutathione-dependent, heavy metal activate PC synthesis in vitro, thus demonstrating these genes encode PC synthase enzymes. Using RT-PCR, AtPCSl expression appeared to be independent of Cd exposure. However, at higher levels of Cd exposure a AtPCSl-CUS reporter gene construct appeared to be more highly expressed. Using the reporter gene construct, AtPCSl was expressed most tissues. Expression appeared to be greater in younger tissues and same higher levels of expression was observed in some regions, including carpels and the base of siliques. AtPCS2 was a functional gene encoding an active PC synthase. However, its Pattern of expression and the phenotype of a mutant (or antisense line) have not been determined. Assuming the gene is functional then it has clearly been maintained through evolution and must provide some selective advantage. This implies that, at least in some cells or tissue, it is likely to be the dominant PC synthase expressed. This remains to be determined

• Journal of Life Science
• /
• v.23 no.3
• /
• pp.406-414
• /
• 2013

The influence of a gradual increase in salinity on the diversity of aquatic bacterial in rivers was demonstrated. The denaturing gradient gel electrophoresis (DGGE) was used to analyze the bacterial community shift downstream in the Hyeongsan River until it joins the open ocean. Four water samples were taken from the river showing the salinity gradients of 0.02%, 1.48%, 2.63%, and 3.62%. The samples were collected from four arbitrary stations in 2.91 km intervals on average, and a DGGE analysis was performed. Based on the results of this analysis, phylogenetic similarity identification, tree analysis, and a comparison of each station were performed. The results strongly suggested that the response of the bacterial community response was concomitant to gradual changes in salinity, which implies that salt concentration is a major factor in shifting the microbiota in aquatic habitats. The results also imply a huge diversity in a relatively small area upstream from the river mouth, compared to that in open oceans or coastal regions. Therefore, areas downstream towards a river mouth or delta are could be good starting points in the search for new bacterial species and strains ("biotypes").

• Information Systems Review
• /
• v.6 no.2
• /
• pp.79-94
• /
• 2004

The Internet is now an ubiquitous technology in business and possesses the potential to make the concept of value chain into an attainable reality. We posit that the way the Internet is utilized, the extent of the Internet's impact on business performance, and the extent the firms are prepared to take advantage of the Internet varies from country to country and from industry to industry. Based on data collected from 54 firms in the U.S. and 135 in South Korea, we compared the two countries (U.S. and South Korea) and two major industry groups (manufacturing and service) regarding the pattern of Internet utilization on the Internet from a value chain perspective. The findings show that U.S. companies utilize the Internet more extensively in such areas as human resources management, automation, sales, and advertising than the South Korean counterparts. However, we did not find a statistically significant difference in the way the two countries use the Internet within a value chain model. We also compared Internet practices by industry sector (i.e., service vs. manufacturing) within each country. The results show that firms in the service sector tend to use the Internet more extensively than the manufacturing counterparts in both countries. Particularly in Korea the difference between the sectors was significant in the extent to which they utilized the Internet to support such business activities as inter-organizational alliance, communication, and marketing.

• Korean Journal of Digital Imaging in Medicine
• /
• v.13 no.2
• /
• pp.63-69
• /
• 2011

Table strapis patient fixture for securing the patient movements and falls. if it designed to measure the abdominal circumference and used as an indicator of dose selection at CT scan. it will prevent the overexposure of dose without degradation of image quality and efficiently manage dose of each type of body to technician to deal with CT. First, in order to compare the dose used in CT image and qualitative characteristics. reference image is obtained by examining the abdominal phantom in same conditions with the hospital 120 kVp, 200 mAs, D-Dom (Dynamic Dose Of Modulation). SNR, PSNR, RMSE, MAE, CTDIvol of CT images are compared with reference image. for comparing with reference image, the image that Umbilicus level image of Abdomen CT is stored in the PACS were used. For comparison, the top 12 o'clock portion of the air drawn from the same ROI was measured. CTDIvol, mAs, etc. In order to analyze the characteristics of the image, by measuring the length of the umbilicus circumference, pattern of the dose was analyzed. by using the analyzed perimeter and dose information, To be identified visually, fixed band that scale marked were produced. Use them, If the length of circumference of less than 60 cm 100 mAs, Case of 61~80 cm 120 mAs, Case of 80~100 cm 150 mAs, more than 100 cm 200 mAs, dose selection based on the perimeter, the image was applied. by compare analyzed with the Reference Image, image quality was assessed. by compare with existing tests that equally 200 mAs applied, How much was confirmed that the dose reduction. 1. Depending on the Abdominal circumference, the average PSNR(dB) of the image that differently dose applied was 45.794. 2. Comparing with existing test. the dose of scan that adjusted the mAs depending on the circumference was decreased about 40%. SNR and PSNR of the image that obtained by adjusting the standard mAs based on dose modulation were not much different. Therefore, By choosing a low mAs. dose reduction can be obtained. and the dose selection method that measured Abdominal circumference using a fixed band can protect the overexposure and uniformly apply dose of each type of body to technician to deal with CT.

• Korean journal of food and cookery science
• /
• v.22 no.6 s.96
• /
• pp.869-874
• /
• 2006

This study investigated the effect of bamboo leaf powder, added at content of 0%, 3%, 6%, 9% and 12%, on the quality and sensory characteristics of rice cake imprinted with flower pattern (Ed-there is no respecitive comparison here) The chemical composition as a whole was 3.07${\pm}$0.12% of moisture, 5.87${\pm}$0.02% of crude protein, 2.52${\pm}$0.05% of crude fat, 23.70${\pm}$0.07% of crude fiber and 7.73${\pm}$0.02% of crude ash. With increasing amount of added bamboo leaf powder, the hardness and chewiness of the cake were significantly increased(p<0.05), while the cohesiveness, springiness and adhesiveness were decreased. In chromaticity, the L-value, the indicator of brightness, was significantly decreased with increasing bamboo leaf powder content. The a-value, the indicator of redness, was significantly lower than the chlorophyll color (p<0.05). The b-value, the indicator of yellowness, was increased indirect proportion to the content. In sensory test, the sensory characteristics such as color, flavor, taste and chewiness were all stronger with increasing powder content, whereas the softness and dampness were weaker. The greatest overall satisfaction was achieved by the sample group of cake with 6% preference added powder.

• Journal of Korea Water Resources Association
• /
• v.38 no.10 s.159
• /
• pp.811-824
• /
• 2005

The ADCP is an instrument based on Doppler effect, which measures discharge of a river in a short time while crossing it. In this study we aim to make a comparison of the discharge results from a moving-vessel ADCP with those measured by velocity-area method at the same cross-section, and to investigate the characteristics of velocity and discharge data using ADCP. Bathymetry measured by ADCP almost coincides with that by direct depth measurements. Because velocity data from ADCP are essentially instantaneous, individual velocity profiles obtained by ADCP are rather different from time-averaged velocity profiles. But spatially averaged velocity profiles of the individual ADCP data near the comparable verticals have similar vertical velocity pattern with the time-averaged ones. The average velocity profile from repeatedly crossed data is also similar with the time-averaged one. In case of the velocity distribution, individual and spatially averaged data for the sub-width of mid-section method Have good agreement with those by velocity-area method. Discharge data determined by averaging several ADCP measurement transects have $0.1\%{\~}9.3\%$ of difference with those from velocity-area method, and as the number of measurement increases, the relative difference to the velocity-area method decreases.