• Journal of Korean Society of Forest Science
• /
• v.99 no.5
• /
• pp.720-725
• /
• 2010

On the basis of vegetation data in the 9.12 ha (380 m ${\times}$ 240 m) permanent sample plot of the spruce-fir valley forest in Liangshui National Reserve of Xiaoxing'an Mountains, the study was conducted to evaluate spatial distribution pattern and spatial association by using point pattern analysis for living and dead trees of Larix gmelini by DBH size class. The number of L. gmelini were counted as 59 living stems/ha (6.42 $m^2$/ha of basal area) and 34 dead stems/ha (2.86 $m^2$/ha of basal area). The distributional curve of diameter class exhibited bimodal shape. The analysis of spatial distribution patterns of all living larch stems noted the clumped distribution on the whole. The size of larch aggregates of dead stems was decreased as diameter class was increased. The distribution of dead stems became gradually randomized with decreased clumped size as the scale increased. Living stems and dead stems of the larch had positive spatial association at most of scales, illustrating that the occurrence of mortality of the larch tree was closely related to the distribution pattern of living larch trees.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.590-595
• /
• 2004

The shape and size variations of the nanopatterns produced on a positive photoresist using a near-field scanning optical microscope(NSOM) are investigated with respect to the process variables. A cantilever type nanoprobe having a 100nm aperture at the apex of the pyramidal tip is used with the NSOM and a He-Cd laser at a wavelength of 442nm as the illumination source. Patterning characteristics are examined for different laser beam power at the entrance side of the aperture( $P_{in}$ ), scan speed of the piezo stage(V), repeated scanning over the same pattern, and operation modes of the NSOM(DC and AC modes). The pattern size remained almost the same for equal linear energy density. Pattern size decreased for lower laser beam power and greater scan speed, leading to a minimum pattern width of around 50nm at $P_{in}$ =1.2$\mu$W and V=12$\mu$m/. Direct writing of an arbitrary pattern with a line width of about 150nm was demonstrated to verify the feasibility of this technique for nanomask fabrication. Application on high-density data storage using azopolymer is discussed at the end.

• Journal of the Korean Society of Costume
• /
• v.24
• /
• pp.29-46
• /
• 1995

This study is on the classification of Chchori forms in Korea in the 16 th and 17 th Centuries by investigating the patterns an construction of excavated clothong. The characteristic features of the Korean Chchori in the period are as follow. 1. The Chchori shows forms. The diversity is accomplished by varing the components pattern is Chchori, such as collar, sleeve, and bodice. The divertification in Chchori pattern represents an attempt to advance the simple Chchori pattern in the 4 th and 5 th Centuries to the mordern one. 2. Mokpankit (목판깃) has a straight construction line but Kalkit (칼깃), Dangkogit(당코깃) have curved one. This suggests a transformation in the construction line of Chchori. 3. Among Chchori pattern, some Mokpankit and Kalkit Chchori show two kinds in size ; 40-50 cm and 60-70 . However, Dangkokit Chchori has only one size of 40-50cm. Considering the difference in body size between man and woman , Mokpankit Chchori and Kalkit Chchori are jueged to be for man and woman commonly, and Dangkokit Chchori is for woman only. After the period , woman wears only Dangkokit Chchori, whichis thought to come from the sex discrimination. Consequently on the viewpoint of rinsiple of Adaptation to Environments, forementioned facts prove the changes in Korean society in the 16 th and 17 th centuries on the historical basis of costume.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.52 no.2
• /
• pp.103-110
• /
• 2016

This study aims to estimate the species, size and shape of fish using a non-contact 3 dimensional pattern laser so that this preliminary test was carried out to understand the structural feature and length of goldfish according to water turbidity and depth in the aquacultural tank. 3-D pattern laser could clearly detect its morphological shape except the caudal fin due to soft tissue. Since the sensing strength of line laser light according to depth has sufficient power, it is possible to measure its depth and structural feature in the detected range. The result showed that the measured error of individual's fork length was less than ${\pm}1%$ in the water using 3-D pattern laser, when compared with the measured value in the air.

• Fashion & Textile Research Journal
• /
• v.18 no.5
• /
• pp.637-646
• /
• 2016

The goal of this study is to provide basic data on developing circular knit basic pattern for women in their 20's. Production conditions of circular knit product pattern making among domestic women's apparel industry was researched, and collected data on sizes and ease amounts from woven and circular knit pattern were compared and analyzed. According to the result of the survey, product measurements adjusted to the actual body size fit for the brand's image were used, and the common problem among manufacturers and consumers regarding circular knit products turned out to be change in size and form due to stretching. For the basic pattern of circular knit, stretching quality was reflected in the woven basic pattern based on plain stitch(single knit) and then dart was removed and ease amount was reduced. The result of looking into size and ease amount about woven and circular knit torso & sleeve block shows that there is a significant difference among chest circumference, hip circumference, bi-shoulder length, interscye back, interscye front, scye depth, upper arm circumference and wrist circumference, and it was clear that circumference and width on the areas around the wrist tended to fit around the body more when circular knit was used instead of woven fabric.

• Fashion & Textile Research Journal
• /
• v.11 no.1
• /
• pp.140-146
• /
• 2009

In this study, the ideal human body of adult woman is to express, and the body dimension of the woman model is produced and compared in doll model with the bodily dimension by presenting the body pattern to produce the dolls with the ideal body proportion visually. For the research process, by collecting, comparing and analyzing the body pattern of the currently used embroidery fashion doll, the pattern of body suit that displays the body of women is designed with the size of model with the height of 168cm. This is scaled for 1/4 of its entirety to make the doll of around 40cm and produced the research doll with two revisions. When compared with the ratio of each part of the body for the height of the produced research doll with the bodily ration of the major ratio of the height of the standard bodily size of Size Korea 2004, the ratio of the category of the height is almost consistent, and the width category is shown approximately 80~85%, waist for 75%, thickness category for approximately 90% as the ideal ratio.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2007.11a
• /
• pp.141-142
• /
• 2007

• Fashion & Textile Research Journal
• /
• v.22 no.3
• /
• pp.357-367
• /
• 2020

This study collected the basic data required to develop a slim-fit jeans pattern for upper grade elementary school girls. First, a fit evaluation was made by selecting five slim-fit jeans of ready-to-wear brands. Subjects were four girls aged 11-12 with an average body size that evaluated the appearance and motion functionality of five brands of jeans. Five experts also evaluated their appearance. Second, pattern sizes were analyzed and compared with the average size of upper grade elementary school girls by measuring the pattern sizes of five brands jeans. As a result, Brand A received a high score in appearance and motion functionality. Brand E scored high with Brand A in appearance, while Brand E had the lowest score in motion functionality. For most of the five brand jeans, (+) ease was added to include a wide range of body sizes for upper grade elementary school girls, but the hip circumference, thigh circumference, and knee circumference of Brand E jeans were smaller than the average size of girls. The (-) ease was applied to make the figure look slim, which resulted in a high appearance score. However, since Brand E received a low score in the motion functionality, it could be seen that the (-) ease was not suitable for subjects although the material was stretchable. The result of this study will be used to develop a slim-fit jeans pattern suitable for upper grade elementary school girls.

• Journal of the Korean Home Economics Association
• /
• v.43 no.4 s.206
• /
• pp.97-110
• /
• 2005

The need for children's formal wear is growing as parents take their children into formal occasions more often than before. Yet there are some problems to be solved in order to generalize about children's formal wear such as high price and the development of patterns for better fit and design. Mothers of boys were surveyed to find out the needs, complaints, and required improvements of boy's formal wear. Pattern designers of children's formal wear brands were interviewed to determine the size specifications, pattern drafting methods and design features of each brand. Based on these results, several pattern drafting methods were selected. Jackets and pants for 9-year-olds were made by each pattern drafting method using the us standard size. They were compared through wearing test to improve the fit. As a result, pattern drafting methods for children's tailored suits and two formal jackets were suggested.

• Transactions of Materials Processing
• /
• v.15 no.1 s.82
• /
• pp.71-75
• /
• 2006

In recent, various shapes of pattern in micron or nano scale are adapted in many applications due to their good mechanical or optical properties. Light guide panel (LGP) of the LCD is one of important applications for micro pattern and micro prism shape is one of the typical patterns. The size of the surface patterns in most applications is decreasing to the order of micron or even under micron. On the other hand, the area to be patterned keeps enlarging. These two trends in patterned products require tooling micro patterns on large surface, which has still many technical problems to be solved mainly due to pattern size and the tooling area. In this study, we fabricated prism shape of patterns using diamond cutting tool on some metal core and plastic core like PMMA. Some cutting conditions were investigated including cutting force, cutting depth and speed for different core materials.