• 한국광학회지
• /
• 제19권1호
• /
• pp.43-47
• /
• 2008

현재 TFT-LCD(Thin Film Transistor Liquid Crystal Display)에 사용되는 BLU(Back Light Unit) 패턴 크기는 수 십 ${\mu}m$인데 반해, 최근에는 BLU 패턴의 크기를 수 ${\mu}m$ 또는 그 이하로 조절함으로써 출력광의 휘도를 증가시키고 균일도를 향상시키고자 하는 연구가 진행되고 있다. 본 연구에서는 패턴의 크기, 분포 및 점유 면적이 출력광의 분포에 미치는 영향을 조사하였다.

• 패션비즈니스
• /
• 제12권1호
• /
• pp.109-119
• /
• 2008

The purpose of this study is to dvelop the basic pattern of wome which are fitting for 75A. The collected data were statistcally processed usig the SPSS 10.0 for Mans Standard Deiation, Cronbach's $\alpha$, etc. This study suggested a size chart for body measurement for constructing basic brssiere patterns with size of 75A. The construction of this experimental brassiere were lower cup, upper cup, front panel and wing and characterized by a round cup wired as well as a full cup embrcing the entire breasts. The drafting method for constructing basic brassiere patterns for 75A was completed by selecting a total of 11subjects, and two wearing tests were carried out with the subjects. the dimensions and shapes of the basic brassiere pattern suggested in this research proved to be fitting and to have a wearing effect that brings together and supports the breasts.

• 한국컴퓨터정보학회논문지
• /
• 제25권6호
• /
• pp.155-164
• /
• 2020

본 연구에서는 유방암 환자를 위한 중년여성용 래쉬가드 수영복의 치수체계와 패턴을 제안하였다. 첫째, 유방암 환자가 선호하는 수영복 디자인을 선정하기 위해서 37명의 유방암 환자를 대상으로 한 설문조사를 통해 가슴이 두드러지지 않고 노출이 적은 래쉬가드의 수영복이 디자인되었으며, 이는 캡이 삽입되기 쉽고 캡이 고정되는 주머니 형태를 갖고 있다. 둘째는, 유방암 환자용 수영복을 위한 치수체계를 개발하였다. 이를 위해 대표사이즈를 젖가슴둘레, 엉덩이둘레, 몸통세로둘레로 정하고, 30~69세의 여성 1625명에 대한 사이즈 코리아의 직접 측정 데이터를 사용하여 교차분석을 실시하였다. 이를 통해 3차원 각 셀의 출현율을 기반으로 유방암 환자 수영복을 위한 17개의 사이즈를 설정하였으며, 중심사이즈를 젖가슴둘레 90cm-엉덩이둘레 95cm-몸통 세로둘레 150cm로 정하였다. 셋째는, 유방암 환자용 수영복 중심사이즈 패턴 개발을 하였다, 이를 위해 먼저 1차 중심사이즈 패턴을 제작하고, 그 후 2차, 3차 수정을 거쳐 패턴을 완성하였다. 각 패턴제작 단계마다 실험의를 제작하여 착용피트성 및 동작적합성 평가를 실시함으로써 최적의 패턴제작을 위한 각 치수항목의 축소율을 구했으며, 이를 반영하여 유방암 환자용 래쉬가드 수영복 패턴을 개발하였다.

• 복식
• /
• 제63권3호
• /
• pp.138-150
• /
• 2013

The purpose of this study was to investigate research trends of subject matter in clothing construction field in clothing and textiles and to suggest the information for the future directions for fashion business and research. 2737 articles with clothing and textiles subject matter, 350 articles with clothing construction field in the Journal of Korean Society of Costume and Journal of the Korean Society of Clothing and Textiles from 2001 through 2010 were analyzed. The major conclusions of the study are as follows: 1. Clothing construction field took 12.8% with 350 articles in the researches of the Journal Publications in 2000s. 2. Clothing construction field showed more proportions in the latter half of the decade. 3. Clothing construction field were classified into 5 topics : topic of basic pattern and pattern for apparel, topic of body types, topic of functionality of clothing and protective clothing, topic of size system of apparel, topic of sewing and manufacturing process. 4. In clothing construction field, topic of basic pattern and pattern for apparel took the most proportions. 5. Topic of body types, topic of functionality of clothing and protective clothing, topic of size system of apparel, topic of sewing and manufacturing process were followed.

• 한국정밀공학회지
• /
• 제21권1호
• /
• pp.133-139
• /
• 2004

High speed machining (HSM) can reduce machining time with the high metal removal rate by high speed spindle and feedrate. This paper supports HSM technology using the small size tool with the optimal tool path generation and modification of tool change. The optimum tool path is generated to reduce cutting length of cavity pattern and change the cutting tool for preventing the tool breakage by wear. The tool path is modified with the experiment data of tool wear and breakage to support tool change on reasonable time. The result can contribute to HSM technology of high hardness materials using the small size end-mill.

• 한국의류산업학회지
• /
• 제20권5호
• /
• pp.592-599
• /
• 2018

The purpose of this study is to investigate consumer needs, image sensibility and preference of bedding fabric according to size and spacing of dot pattern. 18 kinds of dot pattern fabrics were designed with different diameters(6, 8, 10cm) and distances(4, 7, 10cm) in regular arrangement of diamond figure. The subjects were 162 male and female university students. The data were analyzed by SPSS 24.0. Fabrics were assessed subjectively using a 5-point scale 17 consumer needs and 33 sensory descriptors. The most consumer's needs for bedding fabric was shown to be functionality of bedding including hygiene, touch, warmth, ease of washing and management, air permeability, and hygroscopicity. The other parameters of consumer's needs were shown to be physical property and design parameter. The results of analysis of the dimension of image sensibility for fabrics with different size and spacing of dots are derived from six factors including joyfulness, coziness, uniqueness, charm, femininity, and complexity. As a result of analysis of preference with fabric kinds, there was a significant difference in preference with fabrics. The preferred fabrics were characterized by the pattern and the base fabric being striking three-dimensionally with 1/3 twill and 3/1 twill fabric. Sensory descriptors related to joyful image and unique image were analyzed as evaluation terms that can distinguish the preferences of fabrics. Correlation analysis showed the fabrics are preferred as the difference in luminance and reflectance between the base and pattern of the fabric become larger and the spacing of patterns become closer.

• Journal of the Optical Society of Korea
• /
• 제19권1호
• /
• pp.80-83
• /
• 2015

White reflective patterns are very difficult to fabricate, due to the scattering and reflection of light, especially when the pattern size goes down to micron size. A reflective white barrier structure of height $50{\mu}m$ and width $80{\mu}m$ was fabricated using dry-film resist as an intermediate reverse pattern. The reverse dry-film resist pattern was coated with an $SiO_2$ layer by sputtering, to protect the resist from chemical attack by the radical molecules in UV white resin. The UV white resin was applied on the dry-film resist pattern and then cured with ultraviolet light. The fine three-dimensional reflective patterns were finished by removing the dry-film resist.

• 전자공학회논문지B
• /
• 제33B권8호
• /
• pp.30-41
• /
• 1996

This paper presents a comparative study of four pattern recognition algorithms which are invariant to translations, rotations, and scale changes of the input object; namely, object shape features (OSF), geometrica fourier mellin transform (GFMT), moment invariants (MI), and centered polar exponential transform (CPET). Pattern description is obviously one of the most important aspects of pattern recognition, which is useful to describe the object shape independently of translation, rotation, or size. We first discuss problems that arise in the conventional invariant pattern recognition algorithms, or size. We first discuss problems that arise in the coventional invariant pattern recognition algorithms, then we analyze their performance using the same criterion. Computer simulations with several distorted images show that the CPET algorithm yields better performance than the other ones.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 금형가공,미세가공,플라스틱가공 공동 심포지엄
• /
• pp.110-113
• /
• 2005

In recent, various shapes of pattern in micron or nano scale are adapted in many applications due to their good mechanical or optical properties. Light guide panel (LGP) of the LCD is one of important applications for micro pattern and micro prism shape is one of the typical patterns. Many applications have the patterns on their surface and the size of the pattern keep decreasing down to the order of micron or even under micron. On the other hand, the area to be patterned keeps enlarging. These two trends in patterned products require tooling micro patterns on large surface, which has still many technical problems to be solved mainly due to pattern size and the tooling area. In this study, we fabricate prism shape of patterns using diamond cutting tool on some metal core and plastic core like PMMA Some of cutting conditions are investigated including cutting force, cutting depth and speed for different core materials.

• 한국통신학회논문지
• /
• 제11권2호
• /
• pp.85-92
• /
• 1986

한글 Wordprocessor, Workstation 및 Telematics용 I/O Device에서는 각종 크기의 문자나 도형들을 요구하고 있다. 본 논문에서는 내장된 문자 dot pattern을 축소 또는 확대시키기 위하여 지금까지 연구되어온 각종 방식의 알고리즘을 논한다. 또한 문자 dot pattern의 크기를 변환시키는 방법을 평가하기 위한 항목을 논하며 이항목에 따라서 종래의 방식을 주관적으로 평가한다.