• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.8
• /
• pp.99-104
• /
• 2004

This paper proposes a new error pattern ROM (EP-ROM) compression method for continuousdata. The EP-ROM reduces the ROM size by dividing the continuous data into coarse values and their errors and by storing the indices of error patterns instead of the non. This method significantly reduces the ROM size by exploiting the characteristic that the errors for continuous data possess the same patterns. The experiment results show that the EP-ROM achieves 60∼77% ROM size reductions for various continuous data.

• Journal of Fashion Business
• /
• v.6 no.2
• /
• pp.1-16
• /
• 2002

The need for ready-to-wear clothing increases as the problem comes to arise from the fit of custommade clothing due to the characteristics of middle-aged women's somatotype. At this point of time, a study on the realities of production of custom-made clothing in middle-aged women's clothing business firms is of very greatly significance. Therefore, this study was intended to identify the problem and improvements through the survey research of production of custom-made clothing in middle-aged women's clothing business firms and further present the plan for development of custom-made clothing business. The questionnaire was framed based on the contents extracted from the preliminary questionnaire research for the pattern section chief of each business firm. Collected data were statistically processed using the SPSS 10.0 Windows program. As a result, the following findings were obtained: 1. The target age of the middle-aged women's clothing business firms ranged from more than 45 years to less than 50 years of age. Clothing business firms much made inroads into the ready-to-wear clothing market largely in the 1980s and the 1990s. Their active entry into the custom-made clothing market occurred in the 1970s and the 1980s. 2. In terms of the clothing production method of middle-aged women's clothing firms, some private boutique and designer brand clothing firms entered the clothing market with a focus on custom-made clothing in the beginning of its organization and introduced the production method of ready-to-wear clothing in accordance with changes in production methods and consumers' needs and wants. National brand clothing firms manufactured clothing with a focus on ready-to-wear clothing from the beginning of its organization, but at last they manufactured both partial custom-made and whole custom-made as the problem arose from ready-to-wear clothing. Seeing that their clothing production showed the ratio readyto-wear to custom-made clothing of 2.58:1. And it was found that the manufacture of ready-to-wear and custom-made clothing took into consideration the great difference in the pattern, size and design plan. The research of the clothing production process showed that whole custom-made and partial custommade were distinguished according to whether or not the sample was presented. 3. The ready-to-wear pattern of middle-aged women's clothing firms were used with a focus on the 'patternmaker-developed pattern' and company-developed pattern'. Most clothing businesses produced clothing in 4 to 5 basic sizes, which is found to be insufficient to complement the physical characteristics of middle-aged women with many specific somatotypes. In the pattern of custom-made clothing, the 'pattern of ready-to-wear were applied' or the 'customized pattern was developed'. Actual measurements were most used as the size of custom-made, and accordingly it is predicted that the level of satisfaction is higher with the fit of custom-made clothing than that of ready-to-wear. The selling place and the head office showed the similar percent as the place for measuring the size of custom-made clothing. Size measurers were mostly the shop master. And it was found that most clothing business firms had a problem when the measured size was applied to the pattern. Accordingly, it is necessary to provide education on size measurement for shop masters. 4. It was found that in the middle-aged women's clothing firms, the pattern correction of the length of sleeve, jacket and slacks occupied the highest percent. Accordingly, it is necessary to provide for the size system to complement the accurate somatotype characteristics of middle-aged women. 5. In custom-made clothing customer management, most firms engaged in customer somatotype management through size management. They provided customers with commodity information by informing them of the sales and event period and practiced human management for customers by maintaining the get-together and friendly relationship. 6. Middle-aged women's clothing businesses responded that it would be necessary to improve the fit of custom-made clothing and complement their pursuit for individuality as the plan to improve its quality. In consequence, it suggests that middle-aged women's clothing businesses should provide middle-aged women with the clothing of better-suited size and refined design. Middle-aged women's clothing businesses responded that it was the most urgent task to form the custom-made clothing manufacturing team as the plan to expand the custom-made clothing market, which is identified as their emphasis on the systematized production of custom-made clothing.

• Fashion & Textile Research Journal
• /
• v.8 no.5
• /
• pp.552-561
• /
• 2006

This study was conducted to suggest an appropriate jacket bodice pattern for elderly women by comparing the developed pattern with existing ready-made jacket pattern. The developed jacket bodice pattern was produced from the basic sloper in which elderly women's somatotype was fully reflected, by using the newly developed 3D pattern design system. Subjects were 6 elderly women aged from 60 to 69 who have average somatotype in their age group. This study carried out pattern analysis and self-sensory test with three ready-made jackets(national brands) and suggested a developed jacket pattern based on the results. According to the self sensory test results of ready-made jacket, wearing fitness among brands was significantly different even though those brands were same B91 size. The results of ready-made jackets' pattern analysis, size differences among patterns have influenced wearing fitness. The basic numerical formula for the jacket pattern considered elderly women's somatotype were as follows; $B/4+2{\pm}0.2{\sim}0.5$(difference of front and back), $W/4+2{\pm}0.2{\sim}0.5$(difference of front and back), H/4+2~7(ease amount), armhole depth B/4, chest width B/6+1, back width B/6+3 and back neck width B/12+0.5. According to the results of the developed jacket's appearance evaluation, it earned higher scores in silhouette and ease amount, confirming that the developed jacket is appropriate for the elderly women. Also, in the evaluation on space length, the developed jacket pattern was evaluated to allow proper space length in all around of measurement parts.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.2
• /
• pp.187-199
• /
• 2009

Recently, the quality and design of the children's wear is being improved remarkably. Following the trend, the need for the research on the pattern making of children's wear is growing. At first, we tried to find out how the industry is doing the pattern making job through interview. Results are as follows. The target age ranges from 5 to 11 years old. For the sample size of pattern making, 7 years of age is preferred. It is not usual to develop the design pattern from the bodice block pattern. Instead, they use middle block pattern for each item, such as blouse, shirt, pants, skirt or jacket. Starting from these middle block pattern, they prepare individual designs. With the results, the aim of the research became to develop one of most frequently used middle block pattern. The blouse block pattern was selected for that purpose. To look into the existing patterns, we selected 4 methods, i.e. NM-method, T-method, O-method, E-methods. Theses patterns were compared through wearing test for the evaluation of comfort and fit using trial garments. The results indicated the NM-method was best among them. Specially waist line position, shoulder shape and size allowance was adequate. Alteration and adjustment of pattern draft was made onto the NM-method. Allowances for the bust circumference, across chest, across back and depth of arm was adjusted for better comfort as well as fine fit. Sidelines of the bodice and the underarm seam of the sleeves were curved for styling. After another wearing test, the final pattern was suggested as a blouse block pattern for 7 years old girl.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.11 no.5
• /
• pp.332-339
• /
• 1986

This paper proposes a new method for the normalization of shape pattern based on Gaussian probability density function to increase automatic recognition rate of hand-written Hangul pattern. The sizes of hand-written Hangul pattern are detected from the input images, and pattern sizes are normalized by two variables interpolation. The pattrn shapes are noralized by letting correlation coefficients equal to zero. It is analyzed theoretically and verified through computer simulation for the relation between input image and normaized shape pattern. It is confirmed that this method is effective and reasonable for deformed hand-written Hangul pattern. Experimental resu results show that the declination. size and stroke width of hand-written Hangul patterns are mych improved.

• Design & Manufacturing
• /
• v.11 no.3
• /
• pp.29-34
• /
• 2017

Increased demand for parts with micro-pattern structure made of metals, ceramics, and composites in various fields such as medical ultrasonic sensors, CT collimators, and ultra-small actuator parts. Micro powder injection molding (PIM) is a technology for manufacturing micro size, high volume, complex, precision, net-shape components from either metal or ceramic powder. In the present study, a standard mold with a variable insert core capable of producing various micro patterns was investigated. An injection molding test was performed on a standard mold using a line type micro-pattern core having an aspect ratio of 2, a slenderness ratio of 70, a pattern size of $200{\mu}m$, and a pattern spacing of $150{\mu}m$. During the filling process, the deformation of the mold with large aspect ratio and slenderness ratio was analyzed by the experiment and the numerical simulation according to the position of the gate. We proposed a mold structure that minimizes mold deformation by gate modification and enables uniform pattern filling behavior.

• Korean Journal of Optics and Photonics
• /
• v.12 no.3
• /
• pp.190-199
• /
• 2001

In this paper, we have researched the depth of focus (DOF) and cutoff intensity of the $0.1{\mu}m$rule dense line'||'&'||'space pattern according to the various off-axis illumination (OAl) conditions in the optical system of 0.65 NA using ArF excimer laser (193 nm). We have also studied the variation of the DOF and cutoff intensity according to the sub-resolution pattern (hammer head type) size for optical proximity correction (OPC) applied to the capacitor pattern and the various OAl conditions in the same optical system. As a result, it is revealed that the cross type quadrupole or annular illumination is preferred to the conventional X type quadrupole for printing the $0.1{\mu}m$ rule dense pattern. Also, we can investigate the optimal illumination condition and the size of ope sub-resolution pattern to keep a consistent DGF and cutoff intensity trends.

• Fashion & Textile Research Journal
• /
• v.21 no.4
• /
• pp.468-479
• /
• 2019

This study used a three-dimensional-analysis method to quantitatively analyze the change of clothing appearance according to a gusset added to bodice and sleeve patterns for men in their twenties. Comparing six different patterns, the study found that patterns P1 and P2 with little gusset did not have a large difference in the strain map, and pattern P6 had no gusset in the motion of raising the arm $28^{\circ}$ to the side (M1). When the arm was raised $45^{\circ}$ to the side (M2), the P1 pattern had the smallest deformation, and only the P5 pattern had a large deformation from the neck to the armhole area. In contrast, except for in the P3 pattern, large wrinkles formed in the front and back when the arm was raised above $158^{\circ}$ (M3) from the side of the waist to the armpit. In addition, P3 had the smallest change in the hem of the bodice and sleeves. However, the appearance of P2, P3, and P5 was excellent when the arm was moved forward (M4), and the P2 and P5 patterns were the smallest at the bodice and sleeve hem. The P6 pattern showed the least fitness in terms of function. In the case of raising the arm, there was a strong correlation between gusset size and motion function, but when the motion of the arm changed, the motion function did not improved just by changing the ease size.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.942-944
• /
• 2009

Blue phase shows several different reflection colors from the randomly oriented domains and crystal direction. Also there are variations in the size of domains. The domain size is dependent on the temperature gradient. With smaller cooling rate of temperature, the domain size was increased compared with rapid cooling. With injection of light of specific wavelength, we find that the diffraction patterns were occurred around the light spot in the cell of blue phase. It was supposed to be from the matching of the phase retardation and domain size. However, actually the diffraction pattern is reflecting the lattice structure in double twist of the blue phase. The lattice constant from the radius of diffraction patterns shows very similar one from the reflection spectrum, which indicates the internal lattice constant in double twist of the blues phase.

• Elastomers and Composites
• /
• v.58 no.2
• /
• pp.87-94
• /
• 2023

Abrasion tests of an SBR compound were conducted using four different types of abrasion testers (cut and chip, Lambourn, DIN, and LAT100). The abrasion test results were analyzed in terms of size distributions and morphologies of the wear particles. Most wear particles were larger than 1000 ㎛. The wear particle size distributions tended to decrease as the particle size decreased. Except for the Lambourn abrasion test, the wear particles smaller than 212 ㎛ were rarely generated by the other three abrasion tests, implying that small wear particles were produced through friction by introducing talc powder. Shapes of the wear particles varied depending on the abrasion testers. The wear particles generated from the Lambourn abrasion tester had stick-like shapes. The cut and chip abrasion test showed a clear abrasion pattern, but the DIN abrasion test did not show any specific abrasion pattern. The Lambourn and LAT100 abrasion tests showed irregular abrasion patterns.