• The Korean Journal of Pain
• /
• v.33 no.2
• /
• pp.138-143
• /
• 2020

Background: Severe pain associated with proximal femur fractures makes the positioning for regional anesthesia a challenge. Systemic administration of analgesics can have adverse effects. Individually, both the fascia iliaca block (FIB) and femoral nerve blocks (FNB) have been studied. However, there is little evidence comparing the two. The aim of this study was to compare the overall efficacy of the two blocks in patients with proximal femur fracture before positioning for spinal anesthesia. Methods: ASA (American Society of Anesthesiologists) class I, II, and III patients scheduled for elective and emergency surgery with the diagnosis of proximal femur fracture between October 2018 and June 2019 were included in the study. The patients were assigned to two groups by convenience nonprobability sampling of 35 each. Results: Our study showed a reduction in visual analogue scale scores at 3, 4, and 5 minutes after administration of the FIB being 5.1 ± 1.1, 4.1 ± 1.3, and 2.8 ± 0.8, and those after the FNB as 4.4 ± 1.1, 3.3 ± 1.1, and 2.1 ± 1.4 with P < 0.05, which was statistically significant. The mean first rescue analgesia time for the FIB was 7.1 ± 2.1 hours, while for the FNB it was 5.2 ± 0.7 hours. The P value was less than 0.001, which was significant. Conclusions: Both ultrasound guided FNB and FIB techniques provide sufficient analgesia for patient's positioning before spinal anesthesia. However, the duration of postoperative analgesia provided by FIB was greater than that of the FNB.

• Journal of Oral Medicine and Pain
• /
• v.37 no.4
• /
• pp.221-225
• /
• 2012

Disc dislocation without reduction, as known as closed lock, is a clinical condition in which the disc is dislocated from the condyle and does not return to normal position during condylar movement When the condition of disc dislocation without reduction is acute, the initial therapy should include an attempt to reduce or recapture the disc by manual manipulation. When patients report a history of being locked for 1 week or less, manual manipulation is usually successful. In patients with a longer history, success rate tends to decrease rapidly. If the disc has been successfully recaptured, placing an anterior positioning appliance is recommended to prevent clenching on the posterior teeth, which would likely redislocated the disc. But it is hard to make an appliance immediately in the clinic because it takes too much time. And making an appliance using self-curing acrylic resin is not very popular because of its discomfort by odor and working time. Also, if the patient has resin allergy or is under orthodontic treatment, or if it is impossible to control behavior of the patient, it has been restricted to make an appliance immediately. Therefore, to supplement this disadvantages, we tried to confirm about successful short term use of temporary anterior positioning splint made by using putty impression material after manual manipulation in this study.

• Journal of radiological science and technology
• /
• v.40 no.4
• /
• pp.613-620
• /
• 2017

Planning dose must be delivered accurately for radiation therapy. Also, It must be needed accurately setup. However, patient positioning images were need for accuracy setup. Then patient positioning images is followed by additional exposure to radiation. For 45 points in the phantom, we measured the doses for 6 MV and 10 MV photon beams, OBI(On Board Imager) and CBCT(Conebeam Computed Tomography) using OSLD(Optically Stimulated Luminescent Dosimeter). We compared the differences in the cases where posture confirmation imaging at each point was added to the treatment dose. Also, we tried to propose a photography cycle that satisfies the 5% recommended by AAPM(The American Association of Physicists in Medicine). As a result, a maximum of 98.6 cGy was obtained at a minimum of 45.27 cGy at the 6 MV, a maximum of 99.66 cGy at a minimum of 53.34 cGy at the 10 MV, a maximum of 2.64 cGy at the minimum of 0.19 cGy for the OBI and a maximum of 17.18 cGy at the minimum of 0.54 cGy for the CBCT.The ratio of the radiation dose to the treatment dose is 3.49% in the case of 2D imaging and the maximum is 22.65% in the case of 3D imaging. Therefore, tolerance of 2D image is 1 exposure per day, and 3D image is 1 exposure per week. And it is need to calculation of separate in the parallelism at additional study.

• Imaging Science in Dentistry
• /
• v.54 no.1
• /
• pp.57-62
• /
• 2024

Purpose: This report presents a unique case featuring real, ghost, and pseudo-ghost images on the panoramic radiograph of a patient wearing earrings. It also explains the formation of these images in an easy-to-understand manner. Materials and Methods: One real image and two ghost images appeared on each side of a panoramic radiograph of a patient wearing earrings on both sides. Of the two ghost images on each side, one was considered a typical ghost image and the other was considered a ghost-like real image (pseudo-ghost image). The formation zones of the real, double, and ghost images were examined based on the path and angles of the X-ray beam from the Planmeca ProMax. To simulate the pseudo-ghost and typical ghost images on panoramic radiography, a radiopaque marker was affixed to the right mandibular condyle of a dry mandible, and the position of the mandible was adjusted accordingly. Results: The center of rotation of the Planmeca ProMax extended beyond the jaw area, and the area of double image formation also reached beyond the jaw. The radiopaque-marked mandibular condyle, situated in the outwardly extending area of double image formation, exhibited triple images consisting of real, double (pseudo-ghost), and ghost images. These findings helped to explain the image formation associated with the patient's earrings observed in the panoramic radiograph. Conclusion: Dentists must understand the characteristics and principles of the panoramic equipment they use and apply this understanding to taking and interpreting panoramic radiographs.

• Progress in Medical Physics
• /
• v.32 no.2
• /
• pp.40-49
• /
• 2021

Purpose: This study aimed to develop a surface-guided radiosurgery system customized for a neurosurgery clinic that could be used as an auxiliary system for improving the accuracy, monitoring the movements of patients while performing hypofractionated radiosurgery, and minimizing the geometric misses. Methods: RGB-D cameras were installed in the treatment room and a monitoring system was constructed to perform a three-dimensional (3D) scan of the body surface of the patient and to express it as a point cloud. This could be used to confirm the exact position of the body of the patient and monitor their movements during radiosurgery. The image from the system was matched with the computed tomography (CT) image, and the positional accuracy was compared and analyzed in relation to the existing system to evaluate the accuracy of the setup. Results: The user interface was configured to register the patient and display the setup image to position the setup location by matching the 3D points on the body of the patient with the CT image. The error rate for the position difference was within 1-mm distance (min, -0.21 mm; max, 0.63 mm). Compared with the existing system, the differences were found to be as follows: x=0.08 mm, y=0.13 mm, and z=0.26 mm. Conclusions: We developed a surface-guided repositioning and monitoring system that can be customized and applied in a radiation surgery environment with an existing linear accelerator. It was confirmed that this system could be easily applied for accurate patient repositioning and inter-treatment motion monitoring.

• Tuberculosis and Respiratory Diseases
• /
• v.45 no.6
• /
• pp.1223-1235
• /
• 1998

Background and Objective : Although prone positioning has been reported to improve gas exchange, prone positioning alone does not seem to be sufficient to increase systemic oxygen transport in an acute lung injury. The objective of this study was to investigate whether the combined therapy of low dose nitric oxide (NO) inhalation and prone positioning has an additive effect on the oxygenation and hemodynamics in patients with severe ARDS. Patients and Methods : Twelve patients with ARDS were included. Prone positioning alone, later combined with nitric oxide inhalation (5~10 ppm) from the supine position (baseline) were performed with serial measurement of gas exchange, respiratory mechanics and hemodynamic at sequential time points. The patient was regarded as a responder to prone positioning if an increase in $PaO_2/FiO_2$ of more than 20 mm Hg at 30 min or 120 min intervals after prone positioning was observed compared to that of the baseline. The same criterion was applied during nitric oxide inhalation. Results : Eight patients (66.5%) responded to prone positioning and ten patients (83.3%) including the eight just mentioned responded to the addition of NO inhalation. The $AaDO_2$ level also decreased promptly with the combination of prone positioning and NO inhalation compared to that of prone positioning alone ($191{\pm}109$ mm Hg vs. $256{\pm}137$ mm Hg, P<0.05). Hemodynamic parameters and lung compliance did not change significantly during prone positioning only. Following the addition of NO inhalation to prone positioning, the mean pulmonary artery pressure and pulmonary artery occlusion pressure decreased and cardiac output, stroke volume and oxygen delivery increased (P < 0.05) compared to those of prone 120 min. Conclusion : These findings indicate that NO inhalation would provide additional improvement in oxygenation and oxygen transport to mechanically ventilated patients with ARDS who are in a prone position.

• Journal of Korean Foot and Ankle Society
• /
• v.9 no.2
• /
• pp.193-196
• /
• 2005

A posterior 3-portal arthroscopic approach with the patient in the prone position provides a novel and optimal approach for isolated subtalar arthrodesis. This approach facilitates access to the posterior talocalcaneal facet and facilitates safe access with regard to the posteromedial neuromuscular bundle. The technique involves prone positioning, establishment of two posterolateral portals and one posteromedial portal, arthroscopic posterior talocalcaneal facet debridement, percutaneous morcellized bone grafting and internal screw fixation. Preliminary results have shown high patient satisfaction, an excellent fusion rate and less postoperative morbidity than open subtalar arthrodesis.

• Journal of Trauma and Injury
• /
• v.33 no.3
• /
• pp.186-190
• /
• 2020

Resuscitative endovascular balloon occlusion of the aorta (REBOA) has been increasingly used in recent years as a resuscitative adjunct for trauma patients with life-threatening non-compressible torso hemorrhage. By blocking the aorta temporarily with an inflated balloon, REBOA preserves cerebral and coronary perfusion while diminishing exsanguination below the balloon, thereby providing time for resuscitation and definitive bleeding control. When determining the occlusion zone during the REBOA procedure, factors such tortuosity of the aorta, co-occurring minor chest injuries, and the severity of shock must be considered, as well as the main injury site. This paper describes a case of high Zone I REBOA in an elderly patient with a tortuous aorta who had concomitant injuries of the chest and pelvis.

• Archives of Craniofacial Surgery
• /
• v.20 no.5
• /
• pp.329-331
• /
• 2019

Telecanthus is a common symptom accompanied by Waardenburg syndrome, a rare genetic disorder. The optimal surgery for telecanthus correction is still debated. A 28-year-old patient with Waardenburg syndrome underwent transnasal wiring canthopexy using a Y-V epicanthoplasty for telecanthus correction. A Mini-Monoka stent was used to prevent damage to the lacrimal apparatus. The intercanthal distance decreased from 50 mm to 43.2 mm. The easily designed Y-V epicanthoplasty incision provides sufficient operative field for oblique transnasal wiring, which is effective in properly positioning the medial canthal tendon. It has minimal scarring resulting in satisfactory cosmetic outcomes.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.3
• /
• pp.183-188
• /
• 2017

This paper is for the a study on home healthcare system for a patient using SAW Tag. This system is useful when there's a patient in home. Many patients are wounded in restroom. But restroom is very private place and nobody want to be disturbed here. The place where the patient is most injured in the house is the toilet, and it is the point where the privacy of the individual should be kept and the patient's condition should be checked and cope with in case of emergency. And using saw tag, we can calculate position and ID through reflected rf signal. Therefore we propose a general home healthcare system. The management system utilized a seat bed system to monitor at-home patients. The system mounts a bio-signal measuring unit on a toilet seat, measures a bio-signal from the bio-signal measuring unit, and the measured bio-signal is transmitted to the main server through the user's smart phone. With proposed system, we can expand operation area to silver town where many patients are cared. In this paper we developed sensor system and saw tag positioning system and showed the result.