• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2009.10a
• /
• pp.175-176
• /
• 2009

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2009.06a
• /
• pp.607-608
• /
• 2009

• 유체기계공업학회:학술대회논문집
• /
• 2003.12a
• /
• pp.149-153
• /
• 2003

As the fastest growing flowmeter technology, multi-path ultrasonic flow-meters are gaining wider range in petroleum industry for liquid hydrocarbon custody transfer measurement. This paper describes the mult-path ultrasonic flowmeter, URO-Ex1000 the requirements necessary to prove and test in Korea & China. URO-Ex1000 haver a good results with accuracy range, but a little exceed with repeatability.

• The KSFM Journal of Fluid Machinery
• /
• v.7 no.5 s.26
• /
• pp.7-12
• /
• 2004

Multi-path ultrasonic flowrate measuring technology is being received much attentions from a variety of industrial fields to exactly measure the flowrate. Multi-path ultrasonic flowmeter has much advantage since it has no moving parts and little pressure loss. It offers good accuracy, repeatability, linearity and turn-down ratio can be over 1:50. The present study investigates flowrate integration errors using weighting factors. A theoretical flow model uses power law to describe a fully developed velocity profiles and wall roughness is changed. Gaussian, Chebyshev, and Tailor methods are used to integrate line-average velocities. The obtained results show that Chebyshev method in 2, 4-path arrangement and Gaussian method in 3, 5-path arrangement are not affected for wall roughness changes.

• 유체기계공업학회:학술대회논문집
• /
• 2003.12a
• /
• pp.154-160
• /
• 2003

Multi-path ultrasonic flowrate measuring technology is being received much attentions from a variety of industrial fields to exactly measure the flowmeter. Multi-path ultrasonic flowmeter has much advantage since it has no moving parts and not occurred pressure loss. It offers good accuracy, repeatability, linearity and Tum-down ratio can measure over 1:50. The present study investigates flowrate integration errors using weighting factors. A theoretical flow model uses power law to describe a fully developed velocity profiles and wall roughness changes. The methods of weighting factor simulate three configurations of measuring location of gaussian, chebyshev and tailor method. The obtained results show that many chord arrangements are not affected for wall roughness changes and can measure accurate flowrate.

• Proceedings of the KIEE Conference
• /
• 1998.07g
• /
• pp.2464-2466
• /
• 1998

A switch is a component with two or more ports that selectively transmits, redirects, or blocks optical power in a fiber transmission line. Our switch uses rotation mechanism using stepping motor, hence the common optical fiber can scan and allign to one of the arrayed N optical fibers to provide optical path by electronic precise control. The developed switch is consisted of switching module and its control module. The performance parameters of a switching loss and a repeatability are considered very important. We performed the study to reduce the switching loss and improve the repeatability of switch. The switch can be widely used as a test instrument of optical device and of optical cable in factory, also of optical cable monitoring systems.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.382-385
• /
• 2007

Constantly enhancing positioning accuracy by the Global Positioning System (GPS) technique is of great importance, but challenging, especially after the GPS positioning technique has been improved considerably during the past two decades. The associated main error sources have been reduced substantially, if not eliminated. Troposhpeic influence with its highly temporal and spatial variability appears to be one of the major error sources. It is hence an increased interest among GPS researchers to reduce the tropospheric influence or delay. Two techniques have been commonly implemented to correct the tropospheric impact. The first technique, known as parameter estimation, characterizes the path delay with empirical models and the parameters of interest are determined from the GPS measurements. The second strategy, termed as external correction, involves independent path delay measurements. The present study is an integration of both techniques in which the parameter estimation as well as external correction are used to correct the path delay for $110{\sim}210$ km range baselines. Twenty-four parameters have been obtained in 24 hours solution by setting the cutoff angle at 3 and 15 degrees for parameter estimation strategy. Measurements from meteorological instruments and water vapor radiometer (WVR) are applied in the GPS data processing, separately, as an external strategy of present research work. Interesting results have been found, indicating more stable repeatability in baseline when the external correction strategy is applied especially with the inclusion of WVR observations. The offset of an order of 1 cm is found in the baselines determined by the two strategies. On the other hand, parameter estimation exhibits more stable in terms of GPS height repeatability. The offset in the GPS height determined by the two strategies is on the order of few centimeters.

• IE interfaces
• /
• v.11 no.1
• /
• pp.199-205
• /
• 1998

This paper describes the development of on-the-machine measuring(OMM) system which can directly measure the two and three dimensional machined accuracy using a scanning probe in milling machine. Two algorithms, NC program based continuous path(CP) measurement and CAD data assisted point to point(PTP) measurement, are developed for three dimensional measurements, with consideration of the characteristics of the scanning probe. The algorithms are used to develop an auto measuring system. The delveloped system is compared with the CMM (Coordinate Measuring Machine) in terms of accuracy and repeatability. The OMM system is expected to realize measurement time reduction and hence result in high productivity.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.10
• /
• pp.71-77
• /
• 1996

This paper describes the development of on the machine measuring(OMM) system which can directlry measure the three dimensional machined dimensilnal accuracy using scanning probe in milling machine. Two algolithms, continuous path(CP) measurement using UC program and CAD data assisted point to point(PTP) measurement, were developed regarding specification of scanning probe. The OMM system was contructed to verify the developed system suing the proposed algorithm, and actually measured three kinds of machined TV shadow mask molds. The developed system was evaluated it's repeatability and compared with the current measurement system of CMM(Coording Measuring Machine) in terms of relative accuracy and time reduction and productivity increase.

• Journal of Institute of Control, Robotics and Systems
• /
• v.9 no.10
• /
• pp.816-821
• /
• 2003

In the manufacturing industries, agility and flexibility are the key issues to meet the various market demands. From this point of view, open architecture control has many advantages. This paper suggests a real-time Linux-based open architecture controller. Linux-based and windows-based controllers are compared in several aspects, and Linux is shown to be advantageous over the windows. With the user friendly GUI, the suggested controller is applied to the X-Y stage which is made of two linear motors. Path following and repeatability performances are successfully observed, which shows the validity of the suggested controller.