• 유체기계공업학회:학술대회논문집
• /
• 2000.12a
• /
• pp.65-74
• /
• 2000

A five path ultrasonic and/or magnetic flowmeter were installed after valve. Five path ultrasonic flowmeter were tested to obtain it's performance in a water flow standard system and magnetic flowmeter. It's varied with straight pipe length(nD), install direction and valve position. All the results are summerized. The multi-path flowmeters(MUF) showed up to $\pm0.5{\%}$ at a 2, 4, 8, 15D spacing : the MUF was significantly better than magnetic flowmeter at disturbed flow conditions.

• Proceedings of the Korean Information Science Society Conference
• /
• 1999.10c
• /
• pp.414-416
• /
• 1999

무선 ATM은 무선 멀티미디어 서비스를 종단간 ATM 기술로 제공하는 전송방식으로 최근에 그 요구가 급증하여 단말기의 개발과 보급이 폭증하고 있다. 이에 따라 사용자 및 전송용량의 증가로 인하여 셀의 크기가 작아지게 되고 더 많은 핸드오프가 발생하게 되는데, 좀 더 빠르고 망 자원을 보다 효율적으로 이용하도록 하기 위한 기법들에 대한 연구가 증대되고 있다. 본 논문에서는 보다 빠른 핸드오프를 위하여 사용되어지는 여러 가지 routing 방법들 중 단말기가 접속된 기지국이 바뀔 경우 VC(Victual Connection)를 재설정하는 방식인 Path Extension과 Path Rerouting을 사용하여 LAN 환경에서 해당 MSC에 속한 BS의 개수에 따라 어떠한 VC path length와 receive latencies를 나타내는지 비교하여 핸드오프 지연이 보다 적은 기법을 제안한다.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1994.04a
• /
• pp.506-506
• /
• 1994

• Proceedings of the Korean Magnestics Society Conference
• /
• 2011.12a
• /
• pp.109-109
• /
• 2011

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.6
• /
• pp.1827-1835
• /
• 1996

This paper addresses the problem of a torch path generation for the 2D laser cutting of a stock plate nested with resular or irregular parts. Under the constaint of the relative positions of parts enforced by nesting, the developed torch path algorithm generate feasible cutting path. In this paper, the basic object is a polygon( a many-slide figure) with holes. A part may be represented as a number of line segments connected end-to-end in counterclockwise order, and formed a closed contour as requied for cutting paths. The objective is to tranverse this cutting contours with a minimum path length. This paper proposes a simulated annealing based dtorch path algorithm, that is an improved version of previously suggested TSP models. Since everypiercing point of parts is not fixed in advance, the algorithm solves as relazed optimization problem for the constraint, thich is one of the main features of the proposed algorithm. For aolving the torch path optimization problem, an efficient generation mechanism of neighborhood structure and as annealing shedule were introduced. In this way, a global solution can be obtained in a reasonable time. Seveeral examples are represented to ilustrate the method.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.9 no.1
• /
• pp.72-86
• /
• 1998

This paper introduces a simple yet accurate method to predict burst rate and durence expected in a meteor burst communication path in question by comparing its path specifications to those of an exiting path. In this article, the authors analyze the method to derive the burst rate and duration by comparing span distance, frequency, antenna gain, transmitting power and thre- shold level to those of a existing path selected for the reference. the authors further report the result of experiments made for two difference paths; 750 km path and 1,200 km path to Hamamatu Japan and Hatinohe Japan from Kyongsan korea respectively. The occuring rate and average length of the bursts measured on the experiment paths show fairly good agreement with the analysis.

• Analytical Science and Technology
• /
• v.27 no.2
• /
• pp.108-113
• /
• 2014

The harmful materials as volatile organic compounds (VOCS) that is easy for gas to be changed from liquid on ambient temperature, those should be controlled by Korea Chemicals Management Association. The VOCs samples should be collected directly in place so that those could be analyzed. Generally but it couldn't avoid to have the risk of analyst. Moreover, if there is the place limited to entrance, it is impossible to collect directly and measure. Owing to such problem, it tried to be solved by open path FT-IR spectrometer that could be studied on the combustion gases within long path and VOCs samples were tried to measure to large volume by remote and real time. Firstly, it was to investigate optimized measured length between the system and benzene sample of VOCs. As result, The optimized measured length was confirmed with 15 meter length and the qualitative analysis could be measured on seven VOC samples. The calibration curve as quantitative analysis of benzene samples could be worked. On the basis of the result, the system as remote monitor could show to have potentiality.

• Plant Resources
• /
• v.5 no.2
• /
• pp.104-108
• /
• 2002

In order to obtain basic information for selecting early maturing rice varieties which is suitable for early cropping before Alisma plantago in the southern part of Korea. Six rice varieties were grown from May to August in 2002 at Youngjeon Experiment Field, Sunchon and yield components and yield of plants were investingated. Early maturing rice cv. Grubyeo showed higher rough rice yield than any other varieties used in the experiment. It showed high yield components, such as culm length, panicle length, number of panicles per plant, number of spikelets per panicle and ratio of ripened grains. Therefore, it was concluded that Grubyeo was the most suitable variety with high yield for the cultivation before growing of Alisma plantago at the southern part of Korea. The heritability of culm length number of spikelets per panicle and rough rice yield were high and that of panicle length number of panicle per plant, ratio of ripened grain and 1,000 grain wt. of milled rice were low. According to the result of path coefficient analysis, characters highly correlated with rough rice yield showed large direct effects on rough rice yield.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.31 no.4
• /
• pp.146-152
• /
• 2008

This study was aimed to understand the effects of perturbed floor surface on human postural stability while standing. Ten subjects were asked to stand quietly on the surface with two angles of inclination ($0^{\circ}$ and $5^{\circ}$), two contamination conditions (dry and oil-contaminated), and three commercial floor materials (ceramic tile, coated wood, and vinyl tile). During each trial, a force plate with data acquisition systems was used to collect subject's center of pressure (COP) position. Measured COPs were then converted into the length of postural sway path in both subject's anterior-posterior (AP) and medio-lateral (ML) axis. Results showed that the length of sway path in ML axis was significantly affected by the angle of inclination and the type of floor material. The sway length was increased significantly at the inclination angle of $5^{\circ}$ and on the vinyl tile, respectively. The contamination condition, however, did not significantly affect the postural sway length in both AP and ML axis. The results imply that a proper treatment of floor surface and material is critical to preserving postural balance while standing.

• Physical Therapy Rehabilitation Science
• /
• v.11 no.4
• /
• pp.591-597
• /
• 2022

Objective: The sitting and standing are motions that correspond to the previous stage of rehabilitation to go to walking for daily life. The purpose of this study was to measure task times, path length of the center of pressure (COP) and activity on the vastus femoris muscle using surface electromyography (EMG) when standing up and sitting down. Design: One group cross-sectional design Methods: Fifteen elderly subjects (8 male, 7 female) participated. All subjects were tested three times according to four assist levels (non-assist, lower, middle, and maximal assist) using adjusts the length of spring at sit-to-stand and stand to sit on a chair. The task duration, and COP path length were recorded for the balance function on the Nintendo Wii fit board. The activity of the rectus femoris muscle was recorded on both legs using surface EMG. Results: The results showed that the task duration of the sit-to-stand and stand-to-sit were significantly increased compared to without assist (p<.05). The activation of the rectus femoris muscle more significantly decreased compared to without assistance at standing or sitting (p<.05). Conclusions: The assistive chair showed less quadriceps muscle activation during sitting and standing compared to without assistance. We suggest that our assist-standing chair can help with activities of daily living such as standing up and sitting down movements adjusting the spring length for control assist level by safely.