• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.21 no.4
• /
• pp.209-214
• /
• 2011

Objectives: To assess the risk of pushing or pulling the yarn-carrying cart, the survey was performed in some fiber manufacturing factories. Methods: We selected 6 fiber-twisting factories which agreed to in-site survey of their workplace. To measure both initial and sustained forces of the push-pull tasks, Chatillon CSD500 dynamometer(2004, Ametek, USA) was used. The mean of 3 tests for the same cart was adopted as the measured forces. Height and width of cart, weight of spooled yarns, and distance of movement were also measured. Inspection of cart wheel, moving path, and the actual hand position while moving was done. Results: More than one pushing or pulling task exceeded the push-pull force limits of design goal in 5 factories. Though the cart was not loaded the heaviest weight in the factory, the measured push or pull force exceeded the limits several times. A few cart wheels were worn out and tangled with pieces of yarn. It was also observed some holes in the moving path. Conclusions: While the push-pull task is not included in the 11 scopes of over-burdened work notified by Korean government, it should be recognized as risk factor of work-related musculoskeletal disorders. The maintenance work such as regular change and frequent cleaning of cart wheel, the use of fitting wheel, and flattening of bumpy floor through the moving path should be advised importantly in the worksite management of work-related musculoskeletal disorders.

• The KIPS Transactions:PartC
• /
• v.10C no.1
• /
• pp.77-86
• /
• 2003

This paper describes the new method for Internet multicast routing protocols using MPLS (Multiprotocol Label Switching) networks. Internet multicast routing protocols are divided into three categories in terms if tree types and tree characteristics : a shortest path tree a shared tree and hybrid tree types. MPLS should support various multicast mechanisms because of extremely different IP multicast architectures, such as uni-/bi-directional link, Flooding/prune tree maintenance mechanism. the existence of different tree types with the same group, etc. There are so many problems over MPLS multicast that the solutions can't be easily figured out. In this Paper, we make a few assumptions on which the solutions of IP multicast routing protocols over MPLS networks are given. A broadcasting label is defined for the shortest path tree types. Cell interleaving problems of the shared tree types is solved by using block-based transmission mechanism. Finally, the existing hybrid-type multicast routing protocol is reasonably modified Shortest Path tree type to support MPLS multicast. It has been shown that these modifications give better performance (transmission delay) than the orignal method.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.38 no.1
• /
• pp.82-87
• /
• 2011

The pulp infection of primary tooth is often caused by dental caries or trauma. But, if it is not managed properly, it can be produce the periapical lesion. The periapical lesion can cause some complications such as enamel hypoplasia, displacement, root dilaceration and impaction. Treatment options of displaced permanent successor are clinical and radiological follow-up after extraction of primary teeth, surgical opening, orthodontic traction, transplantation and extraction. In these cases, the premolars with abnormal eruption path caused by periapical lesion of the primary tooth have shown successful spontaneous eruption just as a result of extraction of infected primary tooth and space maintenance.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.4 s.346
• /
• pp.22-30
• /
• 2006

In this paper, the goal of our proposed algorithm is to reduce link -failure and route failure caused by dead nodes which consume all of the battery life. I propose an algorithm which provides a ability of changing mutes to neighbor nodes before some of intermediate nodes be shutting don to get the stable route maintenance. To achieve this goal, The proposed routing algerian uses additional new messages to check energy status for monitoring energy of neighbor nodes and to change the path to a neighbor node. From extensive simulations, results show that possibility of cut-offs and time-delay cause of packet-loss have been decreased and also the improvement of transmission effectiveness.

• Journal of KIISE:Information Networking
• /
• v.31 no.3
• /
• pp.280-288
• /
• 2004

In Ad Hoc Networks, a connection breaks due to the irregular movement of mobile nodes and the inherent characteristics of the wireless medium such as the interference and the multi-path fading. AODV, a typical on-demand routing protocol in Ad Hoc networks, uses the local repair mechanism to cope with the connection breaks. This paper proposes an efficient route maintenance scheme for AODV, named as AODV-ERM, by utilizing hello messages. The proposed AODV-ERM scheme can recover some link breaks efficiently without relying on the expensive local repair process, thereby reducing the repair time. To show the effectiveness of the proposed scheme, we performed extensive simulation with NS2. The simulation results show that the proposed scheme can reduce the repair time effectively and thus, increase the overall packet delivery ratio.

• Restorative Dentistry and Endodontics
• /
• v.47 no.1
• /
• pp.3.1-3.9
• /
• 2022

Objectives: This study aimed to assess the impact of a glide-path on the shaping ability of 2 single-file instruments and to compare the centering ability, maintenance of original canal curvatures and area of instrumentation in simulated S-shaped root canals. Materials and Methods: Forty simulated S-shaped root canals were used and were prepared with One Curve (group OC), One G and OC (group GOC), Reciproc Blue (group RB) and R-Pilot and RB (group PRB) and scanned before and after instrumentation. The images were analyzed using AutoCAD. After superimposing the samples, 4 levels (D1, D2, D3, and D4) and 2 angles (Δ1 and Δ2) were established to evaluate the centering ability and modification of the canal curvatures. Then, the area of instrumentation (ΔA) was measured. The data were analyzed using 2-way analysis of variance and Tukey's test for multiple comparisons (p < 0.05). Results: Regarding the centering ability in the apical part (D3, D4), the use of the glide-path yielded better results than the single-file groups. Among the groups at D4, OC showed the worst results (p < 0.05). The OC system removed less material (ΔA) than the RB system, and for Δ1, OC yielded a worse result than RB (p < 0.05). Conclusions: The glide-path improved the centering ability in the apical part of the simulated S-shaped canals. The RB system showed a better centering ability in the apical part and major respect of the canal curvatures compared with OC system.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.27 no.2
• /
• pp.209-222
• /
• 2011

Missing anterior teeth can be replaced using any of a number of methods. Patients may choose to replace missing teeth with a prosthesis that is either removable, fixed, or retained with implants. For patients faced with financial, anatomical, and/or esthetic limitations, the edentulous region can be restored successfully and esthetically with a properly designed and fabricated rotational path RPD. The rotational path RPD is a partial removable dental prosthesis that incorporates a curved, arcuate, or variable path of placement allowing one or more of the rigid components of the framework to gain access to and engage an undercut area. The rigid retainer must gain access to the infrabulge portion of the tooth by rotating into place. Either a minor connector or proximal plate provides retention through its intimate contact with a proximal tooth surface. A specially designed dovetails or asymmetric rest seats provides support and embracing effects. Correctly designed and fabricated rotational path RPD can provide improved esthetics, cleanliness, and retention. But rotational path RPDs are technique sensitive since the rotational path RPD has little margin of laboratory error that rigid retainers cannot be adjusted like conventional clasps can, RPD framework must be remade once the retention is lost. The sufficient understanding of the concept for the rotational path RPD is required for clinically successful treatment. This clinical report describes in detail the theoretical, laboratory considerations and the treatment of a patient with an anterior maxillary edentulous area treated by an AP path rotational RPD that had a difficulty in long term maintenance and describes another clinical case in which more reasonable treatment procedures were approached after analyzing the former case.

• Laser Solutions
• /
• v.6 no.1
• /
• pp.9-16
• /
• 2003

Micromachining using the DPSS 3rd Harmonic Laser (355nm) has outstanding advantages as a UV source in comparison with Excimer lasers in various aspects such as maintenance cost, maskless machining, high repetition rate and so on. It also has the greater absorptivity of many materials in contrast to other IR sources. In this paper, the process for micro-drilling of blind hole in Cu/PI/Cu substrate with the DPSS UV laser and the scanning device is investigated by the experimental methods. It is known that there is a large gap between the ablation threshold of copper and that of PI. We use the Archimedes spiral path for the blind hole with different energy densities to ablate the different material. Finally, the blind via hole of diameter 100$\mu\textrm{m}$ and 50$\mu\textrm{m}$ was drilled.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.8
• /
• pp.97-105
• /
• 2004

The vertical roller mill is the important machine grinding and mixing various crude materials in the manufacturing process of portland cement. Table liner is one of grinding elements of vertical roller mill and is subjected to the cyclic bending stress by rollers and the centrifugal force by rotation of table. It demands $4{\times}10^7$ expense of life but has $4{\times}10^6~-8{\times}10^6$ cycle. It fractures at the edge of grinding path of outside roller The repair expense fur it amounts to 30% of total maintenance of vertical roller mill. Therefore, this study shows the fracture mechanism of table liner of vertical roller mill using HDM and fatigue analysis

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.163-169
• /
• 2003

The vertical roller mill is the important machine grinding and mixing various crude materials in the manufacturing process of portland cement. Table liner is one of grinding elements of vertical roller mill and is subjected to the cyclic bending stress by rollers load and the centrifugal force by rotation of table. It demands $4{\times}10^7$ cycle but has $4{\times}10^6{\sim}8{\times}10^6$ cycle. It fractures at the edge of grinding path of outside roller. The repair expense for it amounts to 30% of total maintenance of vertical roller mill. Therefore, this study shows the fracture mechanism of table liner for vertical roller mill using HDM and fatigue analysis