• 한국전자파학회논문지
• /
• 제20권11호
• /
• pp.1121-1129
• /
• 2009

본 논문에서는 펄스형 시추공 레이더 시스템에 사용되는 UWB 모듈인 펄스 발생기와 광대역 가변 이득 저잡음 증폭기를 설계 및 제작하고, 기존의 시스템과 비교하여 성능을 분석하였다. 공동을 포함하는 지하 매질의 최대 경로 손실을 구하여 시스템 버짓과 규격을 결정하였다. 펄스 발생기는 40 kHz의 펄스 반복율과 5 ns 미만의 펄스폭을 가지고 피크 레벨이 +73 dBm으로 제작되었다. 광대역 저잡음 증폭기는 주파수 20 MHz에서 200 MHz 범위 내에서 3.77 dB의 잡음 지수와 100 dB의 가변 이득 범위를 가지게끔 설계되었다. 실제 시험장에서 기존 시스템과 비교한 결과, 제작된 시스템은 탐사가 되지 않는 영역도 낮은 잡음 지수를 갖는 저잡음 증폭기에 의해서 탐사가 가능하였다.

• 한국항공우주학회지
• /
• 제42권6호
• /
• pp.515-521
• /
• 2014

본 논문에서는 Ray-tracing 기법을 이용하여 그레고리안 안테나의 부반사판을 축변환 후 회전하여 급전혼으로 회귀되는 전파를 없애 이득 및 정재파비를 개선 시키고 부반사판의 크기와 전체적인 부피를 줄여 효율적인 구조를 갖는 축변위그레고리안 안테나를 설계하였다. 설계된 급전혼의 방사패턴을 이용하여 급전혼-부반사판-주반사판으로 전달되는 전파의 경로를 추적하여 주반사판 개구면에서의 전계분포를 구하고 이로부터 원거리 복사패턴을 계산하는 프로그램을 작성하여 안테나 성능을 최적화 하였다. 설계된 안테나는 CST와 제작 측정을 통해 계산결과와 비교하여 이득, 빔폭, 방사패턴, 부엽준위, 반사손실이 계산 결과와 매우 유사함을 확인함으로써 Ray-tracing기법에 대한 타당성을 검증하였다.

• Journal of the Korean Wood Science and Technology
• /
• 제24권3호
• /
• pp.18-27
• /
• 1996

The feasibility of using stress-wave technique in the transverse direction for the assessment of early stages of decay was investigated using compression test specimens having different annual ring orientations subjected to decay by Tyromyces palustris for various time intervals. Decay detection, quantitative assessment of decay, and the prediction of residual strength of decayed wood with less than five percent weight loss can be feasible using stress-wave parameters (wave velocity, wave impedance, and stress-wave elasticity) and their percent reduction due to decay, measured by stress-wave technique in the transverse direction. The use of stress-wave technique in the transverse direction for the application of this technique to structural members in service is desirable, when considering the easiness of attachment of accelerometers of stress-wave measuring device on the surface of members and also accurate detection of localized decayed areas. In stress-wave technique in the transverse direction, stress-wave parameters measured were different according to the angles between wave propagation path and annual ring, due to the anisotropy of wood structure. Therefore, it is recommended to use percent reduction in stress-wave parameters instead of stress-wave parameters. This evaluation method using percent reduction in stress-wave parameters is ideal when it is impossible to observe annual ring orientation on the transverse surface of wood.

• 수산해양기술연구
• /
• 제44권2호
• /
• pp.99-111
• /
• 2008

The purpose of this study is to develop the jellyfish separator system(JSS) for reducing fishery damage by the increase of jellyfish in the sea area of Korea in summer. First of all, to find the optimum structure of a JSS, six types of JSS in trawl fishery were designed and manufactured, the underwater shape of JSS and the separating process by JSS were observed in the circulating water channel(CWC). And the field experiments were carried out in July and September 2004 in the southern sea of Korea. For the moving path of the jellyfish model in the CWC, in case that the model was larger than the mesh size of the separator net, it was guided toward the lower part of the separator net by the guiding net and discharged through the outlet. In case that the model was smaller than the mesh size of the separator net, some models which passed through the upper part of the guiding net were smaller than the mesh size of the guiding net and discharged through the outlet and most of the model which passed through the lower part of the guiding net moved to the codend passing through the separator net. According to the field experiment result, the optimum tilt angle of separator net was inferred $20^{\circ}$ that the discharge rate of jellyfish was higher than the other tilt angle of separator net and the optimum structure of JSS was inferred GS type(consists of guiding net and separator net) that the discharge rate of jellyfish was higher than S type(consists of separator net). It was demamded to carry out more study for the countermeasure to reduce loss of fish.

• Toxicological Research
• /
• 제6권2호
• /
• pp.191-204
• /
• 1990

Trimethyltin (TMT) induced lesions in the rat hippocampal formation was reviewed. Adult rats were treated with a single dose of 6.0 mg TMT/kg b.w. and were sacrificed between 3-60 days following exposure. On the hippocampal formation, the granule cells of fascia dentata showed early changes which subsided considerably at a later time when the destruction of the pyramidal neurons of the Ammon's horn became increasingly pronounced with time, leading to severe destruction of the structure. It is interesting to note that there was an inverse relationship of pathological involvement between the f.d. granule cells and the Ammon's horn neurons; i.e., when there was a large sparing of the granule cells. there was an extensive damage to the Ammon's horn and vice versa. This inverse relationship was also true between the $CA_3$neurons and the $CA_{1,2}$neurons in the Ammon's horn. Progressive zinc loss, as demonstrated by Timm's method, on the Mossy fibers was also observed. Similar Mossy fiber zinc depletion has been demonstrated in electrical stimulatory excitation condition of the perforant path to the hippocampus. Depletion of corticosterone, an inhibitor to the hippocampal neurons, by means of adrenalectomy will exaggerate the TMT induced hippocampal lesion. Neonatal study revealed that a unique degenerative pattern of the Ammon's horn could be established in accordance with exposure to TMT at specific maturation periods of the fippocampal formation: increasing destruction of the Ammon's horn with increasing synaptogenesis between the f.d. granule cells and the Ammon's horn neurons. Thus it is apparent that the damage of the Ammon's horn, upon exposure to TMT, may depend on the integrity and functional state of the f.d. granule cells. A hyperexcitory scheme and mechanism as the toxicity basis of TMT in the hippocampal formation is proposed and discussed.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.286-287
• /
• 2012

Reset-first resistive switching mechanism based on reduction reaction in HfO2-x with oxygen drift-diffusion was studied. we first report that the indirect evidence of local filamentary conductive path formation in bulk HfO2 film with local TiOx region at Ti top electrode formed during forming process and presence of anion-migration at interface between electrode and HfO2 during resistive switching through high resolution transmission electron microscopy (HRTEM), electron disperse x-ray (EDX), and electron energy loss spectroscopy (EELS) mapping. Based on forming process mechanism, we expected that redox reaction from Ti/HfO2 to TiOx/HfO2-x was responsible for an increase of initial current with increasing the post-annealing process. First-reset resistive switching in above $350^{\circ}C$ annealed Ti/HfO2 film was exhibited and the redox phenomenon from Ti/HfO2 to TiOx/HfO2-x was observed with high angle annular dark field (HAADF) - scanning transmission electron microscopy (STEM), EDX and x-ray photoelectron spectroscopy. Therefore, we demonstrated that the migration of oxygen ions at interface region under external electrical bias contributed to bipolar resistive switching behavior.

• 한국인쇄학회지
• /
• 제29권3호
• /
• pp.105-124
• /
• 2011

TFT-LCD consists of LCD panel on the top, circuit unit on the side and BLU on the bottom. The recent development issues of BLU-dependent TFT-LCD have been power consumption minimization, slimmerization and size maximization. As a result of this trend, LED is adopted as BLU instead of CCFL to increase brightness and to reduce thickness. In liquid crystal displays, the light efficiency is below 10% due to the loss of light in the path from a light source to an LCD panel and presence of absorptive polarizer. This low efficiency results in low brightness and high power consumption. One way to circumvent this situation is to use a reflective polarizer between backlight units and LCD panels. Since a nano-wire grid polarizer has been known as a reflective polarizer, an idea was proposed that it can be used for the enhancement of the brightness of LCD. The use of reflective polarizing film is increasing as edge type LED TV and 3D TV markets are growing. This study has been carried out to fabrication of the nano-wire grid polarizer(NWGP) and investigated the brightness enhancement of LCD through polarization recycling by placing a NWGP between an c and a backlight unit. NWGPs with a pitch of 200nm were fabricated using laser interference lithography and aluminum sputtering and wet etching. And The NWGP fabrication process was using by the UV imprinting and was applied to plastic PET film. In this case, the brightness of an LCD with NWGPs was 1.21 times higher than that without NWGPs due to polarization recycling.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제8권4호
• /
• pp.1368-1389
• /
• 2014

Three-dimensional multiple-input multiple-output (3D MIMO) and large-scale MIMO are two promising technologies for upcoming high data rate wireless communications, since the inter-user interference can be reduced by exploiting antenna vertical gain and degree of freedom, respectively. In this paper, we derive the achievable sum rate of 3D MIMO systems employing zero-forcing (ZF) receivers, accounting for log-normal shadowing fading, path-loss and antenna gain. In particular, we consider the prevalent log-normal model and propose a novel closed-form lower bound on the achievable sum rate exploiting elevation features. Using the lower bound as a starting point, we pursue the "large-system" analysis and derive a closed-form expression when the number of antennas grows large for fixed average transmit power and fixed total transmit power schemes. We further model a high-building with several floors. Due to the floor height, different floors correspond to different elevation angles. Therefore, the asymptotic achievable sum rate performances for each floor and the whole building considering the elevation features are analyzed and the effects of tilt angle and user distribution for both horizontal and vertical dimensions are discussed. Finally, the relationship between the achievable sum rate and the number of users is investigated and the optimal number of users to maximize the sum rate performance is determined.

• 에너지공학
• /
• 제24권4호
• /
• pp.63-70
• /
• 2015

창문에서의 틈은 열 손실 뿐만 아니라 차음 성능에도 중대한 결함으로 작용되며, 특히 인체에 유해한 미세먼지 유입 경로로도 작용된다. 이러한 틈을 제거하기위해 많은 시도들이 이루어지고 있으나, 창문의 고유 기능인 이동특성으로 인해 해결하기 어려운 난제로 인식되어왔다. 본 연구는 이를 해결하기위해 수평 회전 휠과 곡선 레일을 적용한 새로운 유형의 미서기 창문을 제작하고, KS 시험 기준에 따라 사용성, 내구성, 기밀성능, 등의 성능 시험을 하였다. 시험 결과, 개폐력은 2000 N 중량의 창문에서 30 N, 개폐 반복성 시험에서는 100,000 cycles, 기밀성 시험에서는 10 Pa에서 $0.00m^3/(m^2h)$의 성능을 보여주었다. 상기 시험 결과, 새로운 구동 방식을 지닌 본 연구에서의 창문은 기밀성과 경제적 측면에서 새로운 접근 방식을 제시하고 있다.

• 한국지반신소재학회논문집
• /
• 제2권1호
• /
• pp.47-55
• /
• 2003

14가지 니들펀치 부직포 지오텍스타일의 섬유구성인자인 두께, 기공도, 섬유장 및 직경 등이 수평투수성에 미치는 영향을 평가하였으며, 두께변화, 수평투수도, 압축 하중 하에서의 수평투수성을 구성방정식에 의해 분석, 평가하였다. 그리고 섬유 패킹 밀도가 다른 라미나(laminar) 지오텍스타일 복합재료를 제조하여 라미나 구조가 수직투수성에 미치는 영향을 평가하였다. 수평투수도는 부직포 지오텍스타일의 두께가 증가할수록 커졌으며, 기공도와 섬유직경이 커질수록 수평투수계수는 증가하였다. 수직응력이 증가할수록 기공도의 영향은 감소하였으며, 섬유장이 길수록 수평투수계수는 약간 크게 나타났다. 구성섬유의 직경이 클수록 수평 투수계수는 커지며, 직경의 비슷할수록 유사한 투수계수를 나타내었다. 라미나 지오텍스타일의 수직 투수성은 내부 경계면에서의 손실 수두에 영향을 받으며, 경계면에서 투수로의 연결형상은 bell mouth형이거나 부드러운 유입관 형태로 평가 되었다.