• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.7
• /
• pp.1295-1305
• /
• 2000

Status of the contaminated sediments in Lake Paldang was investigated. Sediment samples were taken at 34 points and analyzed in terms of ignition loss, CODer, total P and total N. The contamination level did not show any significant variation with depth of the sediments, which indicated the contaminants were recalcitrant. The type of P in the sediment was analyzed, and the sum of adsorbed P and NAI-P, that can be re-solubilized under the reductive condition, was found to be 20-30% of the total P. From the analysis of the water quality change along with the flowing path, it would be concluded that the effect of the sediments on the water quality is insignificant yet in Lake Paldang. However, long term analysis covering at least four seasons should be continued in order to get a more reliable conclusion. A depth profile map of the sediment in Lake Paldang was provided.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.6
• /
• pp.1433-1442
• /
• 1997

Algorithm design is needed to optimized bandwidth which satisfy quality of service(QoS) requirements of vary traffic classes for Multimedia service in ATM networks. The diverse flow characteristics e.g., burstiness, bit rate and burst length, have to guarantee the different quality of service(QoS) requirements in Asynchronous Transfer Mode(ATM). The QoS parameter may be measured in terms of cell loss probability and maximum cell dely. In this paper, we consider the ATM networks which the virtual path(vip) concept is implemented by applying the Markov Modulated Deterministic Process method. We develop an efficient algorithm to computer the minimum capacity required to satisfy all the QoS requirements when multiple classes of on-off source are multiplexed on single VP. Using above the result, we propose a simple algorithm to determine the VP combination to achieve the near optimum of total capacity required for satisfying the individual QoS requirements. Numerical results are also presented to demonstrate the performance of the algorithm, when compared to the optimal total capacity required.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.8A
• /
• pp.679-687
• /
• 2005

A mobile ad-hoc network (MANET) is one consisting of a set of mobile hosts capable of communicating with each other without the assistance of base stations. It is necessary to use bandwidth effectively because MANET has limited bandwidth. In this paper, we propose SMGS (source based multiple gateway selection routing protocol). In SMGS, each node estimates its expected life time (ELT) and if its ELT is larger than that of current gateway it becomes a candidate node. When a source node establishes a path, in each grid the candidate node will take the route request and be a gateway node for the each source node. The node that is expected to stay the longest time in the grid is selected so that we can reduce frequent gateway handoff, packet loss, and handoff delay.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.2B
• /
• pp.287-295
• /
• 2010

RTLS used to track the location of object or person in real time. However, if there are a lot of tags and readers, the conventional single RTLS server may fail to estimate location of tags. And if the server cannot receive the tags signal due to pass-loss or NLOS from more than three readers, the server fail to estimate location of tags. In this paper, we propose a special reader which embeds RTLS location engine for distributed RTLS. And by using multi-directional antenna, alleviating multi-path effect and allowing estimate tag's location only using two readers. We also implement the system, we can reduce server packet 16times and get the all results of location estimate in single second. We achieved the location error within 1m.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.1
• /
• pp.12-17
• /
• 2008

In this paper, an I-V characteristics of bypass diode has been studied by counting the shading effect in photovoltaic module. The shadow induces hot spot phenomenon in PV module due to the increase of resistance in the current path. Two different types of PV module with and without bypass diode were fabricated to expect maximum output power with an increasing shading rate of 5 % on the solar cell. Temperature distribution is also detected by shading the whole solar cell for the outdoor test. From the result, the bypass diode works properly over 60 % of shading per cell with constant output power. Maximum power generation in case of solar cell being totally shaded with bypass diode decreases 41.3 % compared with the one under STC(Standard Test Condition). On the other hand, the maximum output power of the module without bypass diode gradually decreases by showing hot spot phenomenon with the increase of shading ratio on the cell and finally indicates 95.5 % of power loss compared with the output under STC. Finally the module temperature measured increases around $10^{\circ}C$ higher than that under STC due to hot-spots which come from the condition without bypass diode. It has been therefore one of the main reasons for degrading the PV module and shortening the durability of the PV system.

• The KIPS Transactions:PartC
• /
• v.14C no.7
• /
• pp.589-596
• /
• 2007

Although flooding has the disadvantages like a transmission of duplicated packets and a packet collision, it has been used frequently to find a path between a source and a sink node in a wireless ad hoc network. Clustering is one of the techniques that have been proposed to overcome those disadvantages. In this paper, we propose a new flooding mechanism in ad hoc networks using cluster formation based on the link density which means the number of neighbors within a node's radio reach. To reduce traffic overhead in the cluster is to make the number of non-flooding nodes as large as possible. Therefore, a node with the most links in a cluster will be elected as cluster header. This method will reduce the network traffic overhead with a reliable network performance. Simulation results using NS2 show that cluster formation based on the link density can reduce redundant flooding without loss of network performance.

• KSCI Review
• /
• v.14 no.2
• /
• pp.159-164
• /
• 2006

MES(Manufacturing Execution System) is a control system which supports basic activities(scheduling, working process and qualify management, etc) to execute working on the shop floor. As especially MES is a system to decrease the gap between production planning and operating, it executes functions that make decision between management and labor using real-time data. MES for real-time information processing requires certain conditions such as data modeling of RFID, which has recently attracted attentions, and monitoring of each product unit from manufacture to sales. However, in the middle of processing the unit with a RFID tag, transponders(readers) can't often read the tag due to reader's malfunctions, intentional damages, loss and the circumstantial effects; for that reason, users are unable to confirm the location of the product unit. In this case, users cannot avoid tracing the path of units with uncertain clues. In this paper, we suggest that the unique MES based on RFID and Bayesian Network can immediately track the product unit, and show how to evaluate it.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.3 no.1
• /
• pp.67-74
• /
• 1999

In this study, coda Q has been determined by the single scattering model in the Kyeongsang Basin region using the decay of the amplitudes of coda waves on bandpass-filtered seismograms of local microearthquakes in the frequency range 1.5~18 Hz. Reported frequency dependence of Q is of the form $Q_C=Q_O^n$$(83.9{ll}Q_0{ll}155.9,;0.76{ll}n{ll}1.05$. Considering a model incorporating both scattering and intrinsic attenuation, and assuming that the attenuation is entirely due to the scattering loss, the minimum mean free paths are about 51~56 km and the coefficients of inelastic attenuation(${\gamma}$) are between 0.0093 and 0.0098 were found. Earthquake-station paths pass through the fault zone show high attenuation and strong frequency dependency compared to other ones.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.12B
• /
• pp.2335-2341
• /
• 1999

The $2\times32$ coupler consists of Mach-Zehnder interferometer and Y branch coupler. For the designs of this coupler, three dimensional rectangular core waveguide decomposed to two-dimensional structure by the effective index method. To optimize the waveguide structure, the confinement factor was investigated with two-dimensional finite difference Beam Propagation Method. The $2\times32$ coupler fabricated by simulation with height between Mach-Zehnder arms, H=$43.6\mu\textrm{m}$(path difference $0.668\mu\textrm{m}$) was showed best characteristics. In the results of dry etching of core layer, the etching rate of core layer was above 2600${\AA}$/min, the etching ratio of SiO2 to Al mask was 30:1 and the uniformity of etching was $\pm$5%. The maximum insertion loss and the uniformity of $2\times32$ coupler were below 19.2dB, 2dB respectively.

• Journal of Information Technology Applications and Management
• /
• v.26 no.5
• /
• pp.41-56
• /
• 2019

Recently great loss of life and property is occurring because of fire, natural disaster, earth quake, tsunami and so on. People spend 80~90% of their time indoor environment like office, supermarket, campus. Therefore Indoor navigation and guidelines system became so essential for most of all. Incase of emergency we must be careful earlier, in such a cases 5G kind of new technology may also cannot work. So immediate action and quick routing notification for guidelines and protection is the most. Considering this issue We proposed indoor evacuating guidance system based on microcontroller Wi-Fi board for Indoor APP using mobile. Focusing various kind of technology like, ok google, voice search APP we purposed node architecture based system. When we listen fire alarm while living inside the room. Then to be safe we connect with server and start Arduino UNO+IoT ESP8266 Wi-Fi shield version1-IoT module to store data in MySQL DB server. We make application to escape out from the building up-to the three exits giving information from source point to destination. Our program can send information to the users emergency location and situations. For this when the user get sound or vibration in their mobile device it indicate fire out near by. At that time we update message from Arduino to DB server for the fixed current position inside the building which give routing signal for that fire out location by changing values from 0 to 1. We have user in point 10 where user is near by. Later we detect Wi-Fi signal form Nodemcu as room of each floor and try to connect with user. Main purpose of this paper is to save life of people in short time and find out the shortest path up to nearest exits in the time of emergencies and rescue them.