• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.9B
• /
• pp.774-782
• /
• 2003

Generally, in the Mobile IP technologies, the use of RSVP(Resource ReSerVation Protocol) is recommended in order to provide a mobile node real-time service. However, the handoff of a mobile node increases the registration delay, RSVP reservation delay and signalling overhead in the Mobile IP and RSVP interworking. Specially, the resource reservation on the path between a mobile node and a correspondent node is the duplicated reservation and then causes unnecessary creation of the signalling overhead and waste of the resource, since the majority of the path before handoff and after handoff is same. If the radius of a cell providing a wireless interface to a mobile node is small, the number of handoff will increase and also signalling overhead and duplicated resource reservation will increase. In this paper, we proposed the integration model of Cellular IP and RSVP with RSVP proxy scheme. Here, Cellular IP protocol minimizes registration delay, transfer delay, and loss by handoff in micro cell network, the RS VP proxy that minimizes the duplication of resource reservation prevents the path for RSVP session from change using the address for reservation of a mobile node. Proposed scheme was evaluated in comparison with the existing Mobile IP and RSVP interworking scheme using the probability of resource reservation fail to the radius of a cell and the handoff rate.

• Journal of Korea Multimedia Society
• /
• v.19 no.5
• /
• pp.910-917
• /
• 2016

Sensors have limited resources in sensor networks, so efficient use of energy is important. Representative clustering methods, LEACH, LEACHC, TEEN generally use direct transmission methods from cluster headers to the sink node to pass collected data. However, the communication distance of the sensor nodes at low cost and at low power is not long, it requires a data transfer through the multi-hop to transmit data to the sink node. In the existing cluster-based sensor network studies, cluster process and route selection process are performed separately in order to configure the routing path to the sink node. In this paper, in order to use the energy of the sensor nodes that have limited resources efficiently, a cluster-based multi-hop routing protocol which merges the clustering process and routing process is proposed. And the proposed method complements the problem of uneven cluster creation that may occur in probabilistic cluster methods and increases the energy efficiency of whole sensor nodes.

• Journal of the Korean Society for Precision Engineering
• /
• v.8 no.4
• /
• pp.84-94
• /
• 1991

In order to achieve high accuracy of teaching and increase productivity using industrial robots in polishing process of dies, an off-line task programming system was developed on IBM-PC/386 under WINDOWS 3.0 operating system. The internal structure and the machematical basis of CAMPoli are described. Surface modeling technique of polishing dies with sculptured surfaces is introduced by poing data interpolation methodology through the use of CL-data transmitted from conventional CAM system. Tool selection, polishing speed, polishing pressure and kinds of tool motions can be determined and selected by user specified polishing variables. Task creation and verification of polishing path via computer graphics simulation of polishing tool can be done by the menu- driven function of CAMPoli system. Post-processing module is attached to generate robot language. Some simulation results are provided as verification means of the system.

• Journal of Communications and Networks
• /
• v.9 no.1
• /
• pp.84-92
• /
• 2007

This paper deals with the creation of multicast trees in a differentiated services (DiffServ) domain. Initially, we model the integration problems of multicast & DiffServ and give a general de-scription of our framework for multicast provisioning in DiffServ domains. Within this framework, we introduce a novel heuristic algorithm which calculates the multicast trees efficiently. The multicast tree's format and the bandwidth constraints per service class are modeled. The heuristic is based on the Dijkstra's shortest path algorithm and aims to produce the cheapest possible trees (Steiner tree problem) that conform to the defined model. The produced trees can be considered as DiffServ-customized Steiner trees. Furthermore, we evaluate the algorithm with theoretical and experimental analysis and finally, we present our conclusions.

• Journal of Environmental Impact Assessment
• /
• v.31 no.4
• /
• pp.201-213
• /
• 2022

Creation and administration of green space are emphasized to solve the environmental problem and the management of green space in urban area. Urban area with high development pressure faces green space fragmentation, so the planned approach is needed to improve the continuity of green space. However, the current institutional green axis, used to enhance continuity of urban space is merely an abstract concept under the master plan so that is not a consistent framework for urban green continuity providing no detailed information such as position and path. Therefore, in order to consistently manage green space in continuous point of view, it is insufficient not being connected to each individual green space development projects. This study proposes a method for finding the connection path to enhance urban green space continuity. This proposed method consists of two phases. First phase is finding nodes to connect current green space and second is to calculate the least cost path. We calculate connection cost using NDMI (Normalized Difference Moisture Index), impervious ratio and official land cost, applying to Suwon city and potential greening site that was planned in official master plan. According to the results, we confirm a possibility of finding a cost-effective connection path with detailed spatial information instead of unrealistic abstract concepts and discuss worth applying to a legally plan and policy.

• The Journal of the Korea Contents Association
• /
• v.14 no.4
• /
• pp.19-28
• /
• 2014

Recent advancements in the IT industry have made daily life more convenient than ever before. In particular, studies have focused on the position detection of individuals using the GPS in smartphones, and this application has been utilized actively in emergency rescue organizations. However, existing methods send the location information of a user to a predetermined guardian set by the user or to a control center when the user enters into or deviates from a predetermined space. Such spaces are created by an arbitrary radius, thereby making it difficult to set a detailed area by using an existing radius-area creation method in an unstructured space and path with a specific road, such as for trekking, amusement parks, or mountaineering. This study proposes a novel method for setting up an area by connecting multiple radii to improve the existing radius-area creation method in order to easily set a detailed area in smart devices or on the Internet. In addition, an optimization method for resource use is proposed by comparing the operation results in which a user's location is detected by using the proposed location-based area setup method and deviation detection.

• Journal of Science and Technology Studies
• /
• v.9 no.2
• /
• pp.1-27
• /
• 2009

This study aims at reviewing and assessing the characteristics of the Korean Science, Technology and Innovation(STI) policy of the 2000s. Starting from the 2000s, Korea's STI policy began to show a new look as there was a clear voice calling for the new strategy creating a new technological development path and the scope of the policy was expanded to the social and quality of life issues. "Creation" and "integration" are becoming the key words of the STI policy of Korea. However, these new trends are not easy to be diffused or institutionalized because still there is the legacy of the old practice of the "catch-up" period, which focused on economic development as well as the imitation of advanced technologies. As result, the current period of the 2000s shows characteristics of a transitional period where the past and the future coexist.

• The Journal of the Korea Contents Association
• /
• v.18 no.2
• /
• pp.459-467
• /
• 2018

This study aim to analyze the factors affecting technical support input and performance of companies benefiting from ICT SME technology support operated by ETRI. In order to analyze the data, we surveyed 181 companies who received technical support between 2015 and 2017, and analyzed the relationship between input factors and performance factors through path analysis. As a result of the study, it was found that the service quality was directly influenced on the improvement of technology level, and the cost reduction effect was influenced by the amount of support, the year of support, and the service quality. Also, input factors affecting contribution sales are the amount of support, and the support year and quality of support services are not effective. Finally, as a result of examining the effect of technological and economic performance on job creation, it is found that the effect of job creation increases as the contribution sales increase.

• Journal of Korea Technology Innovation Society
• /
• v.15 no.3
• /
• pp.500-532
• /
• 2012

This study analyzed the technology innovation strategies of knowledge-based companies in the semiconductor IP industry. The theoretical approaches of this study are to i) the creation, protection and utilization of knowledge and innovation, ii) value creation from innovation, iii) modularity, timing of market entry, and the emergence and competition of standard (dominant design). Based on the theoretical analysis, I presented exploratory research hypotheses. Ultimately, this study examined the proposed hypotheses by conducting case studies on the technology innovation strategy of two leading knowledge-based companies in the semiconductor IP industry: ARM and INTEL. First, knowledge-based companies entering in the early stage of the technology cycle select the vertically-integrated technology strategy because of lower access to complementary knowledge assets, and maintain the vertically-integrated technology strategy despite the environmental change-driven differentiation of industry's value chain. Second, knowledge-based companies entering in the later stage of the technology cycle prefer the contract-based technology strategy because of its increased accessibility to complementary knowledge assets, and choose a different path of innovation strategies depending on whether their asset has the feature of discontinuity or not.

• Journal of Science and Technology Studies
• /
• v.6 no.2 s.12
• /
• pp.45-75
• /
• 2006

This study analyzed the meanings and drives, and government roles in NIS transformation process. Specifically, I deal with changes in the S&T policy and S&T public administration system as NIS changed from catch-up to post catch-up. As a result, S&T policy and administrative structure has changed as key elements of a new form of steering the transformation process. Though changed from direct to indirect, the role of the state remains strong in 'vision creation' and 'discursive coordination' as supporter and facilitator of the NIS transformation process. Especially, administration structure has been changed to strengthen decentralized pluralism and linkages and cooperation between government and private, between firms and universities, among inter related ministries.