• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 추계 학술발표회 제17권2호
• /
• pp.543-546
• /
• 2005

The development and maintenance of a sound bond are an essential requirements of concrete repair and replacement. The bond property of a bonded overlay to its substrate concrete during the lifetime is one of the most important performance requirements which should be quantified This study was performed to investigate the characteristics of adhesive strength for overlay concrete. Three different removal methods of deteriorated concrete such as chip-patch, mill-patch and water-jet were varied in this study. According to the adhesive strength of pull- off test, case III using water-jet was measured $2\~3$ times higher than that of chip-patch or mill-patch.

• 전기전자학회논문지
• /
• 제21권1호
• /
• pp.46-65
• /
• 2017

This paper proposes a fast patch-based de-blurring algorithm including kernel estimation based on the angle between the edge and the blur direction. For de-blurring, image patches from the most informative edges in the blurry image are used to estimate a kernel with low computational cost. Moreover, the kernels of each patch are estimated based on the correlation between the edge direction and the blur direction. This makes the final kernel more reliable and creates an accurate latent image from the blurry image. The combination of directionally oriented kernel estimation and patch-based de-blurring is faster and more accurate than existing state-of-the art methods. Experimental results using various test images show that the proposed method achieves its objectives: speed and accuracy.

• 비파괴검사학회지
• /
• 제24권3호
• /
• pp.268-274
• /
• 2004

스마트 구조물에 적합한 탄성파 검출 센서로서 고분자 압전센서를 이용한 부착형 센서에 대한 연구를 수행하였다. PVDF와 P(VDF-TrFE)에 대하여 센서로서의 특성을 평가하였으며 상용화된 PZT 센서와 비교하였다. 음향임피던스가 서로 다른 여러 가지 재료에 고분자 압전센서를 부착하여 연필심 파괴 시 발생하는 탄성파를 검출하여 분석하였다. 센서의 직경이 증가함에 따라 검출 신호의 최대 진폭 값은 증가하였으나 센서의 주파수 검출한계는 감소하는 것으로 나타났다. 시편의 음향임피던스가 감소할수록 검출신호의 최대 진폭 값은 증가하였으며 주로 저주파수의 주파수 성분의 신호에 민감한 것으로 분석되었다. 전반적으로 P(VDF-TrFE) 센서가 PVDF 센서보다 감도 면에서 다소 양호한 것으로 나타났다.

• 한국건축시공학회지
• /
• 제12권6호
• /
• pp.607-614
• /
• 2012

In this study, the evolution of the electro-mechanical impedance (EMI) of a piezoelectric (PZT) patch embedded in fresh cement paste was investigated to discuss the possibility of monitoring the setting process of cement-based materials using an EMI sensing technique. A tailored thin square PZT patch was embedded in cement paste before casting, and EMI signatures of the embedded patch were continuously measured from casting up to 12 hours. A standard penetration resistance test was performed to compare and correlate the evolution of EMI during the setting process. The results showed that EMI responses differ according to the age of the cement paste, and that the behavior of the EMI resonance peak has a clear correlation with the penetration resistance of the cement paste. Based on the results, it is concluded that an EMI sensing technique using embedded PZT patch can be effectively applied to monitor the setting process of cement-based materials.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.265-266
• /
• 2008

The objective of this paper is to effectively detect partial discharges in XLPE power cables. In this field, we have been usually applied several sensors for such partial discharges. This study used a type of beyond compare antenna based on the influence of background noises. Also, we designed a new structure that is able to easily apply in the adhesion of planar patch types for XLPE power cables in measurement sensitiveness elevation. A high frequency simulation tool (CST-MWS) was applied to the antenna used in this study, and it was used to evaluate certain characteristics. We fabricated an antenna using the simulation data obtained from a specific test. After checking the sensitivity of this Planar Patch Sensor in the Lab, it was tested in an actual site. This paper analyzed the data as a part of time and frequency domain using an oscilloscope and spectrum analyzer, respectively.

• 생물환경조절학회지
• /
• 제21권2호
• /
• pp.140-146
• /
• 2012

나노 크기인 5nm 이하로 제조한 은나노제품(파이투패치)은 주요 식물병원균인 탄저병원균(Collectotrichum gloeosporioides), 잿빛곰팡이병원균(Botrytis cinerea), 균핵병원균(Sclerotinia sclerotiorum)에 대해 포자발아 및 균사생장을 억제하는 항균력이 있었다. 파이투패치 살포에 의한 고추탄저병 방제효과를 실험하기 위해 파이투패치 희석액에 포자를 침지하여 포습시킨 후 발아율을 조사한 결과 5ppm까지 희석한 처리구에서 병원균의 포자발아억제효과를 보였으며, 균사는 10ppm에서 생장억제효과가 15일간 지속되었다. 특히 파이투패치를 10ppm으로 희석하여 배지표면에 도말한 후 탄저병원균 포자를 접종하면 3일간 발아가 억제되어 식물체 감염을 효과적으로 예방하였으며, 40% 이상 발병한 시험구에 4ppm 파이투패치를 살포한 결과 21일 후 7% 이하의 발병과율로 무처리 대비 70% 방제효과가 있었다. 장마철 탄저병 발생율이 94.6%인 시험포장에서 10ppm 농도로 파이투패치를 7일간격으로 엽면살포한 결과 발병과 발생율이 5.8%로 방제효과를 확인하였으며, 수확한 홍고추를 자연건조한 후에도 발병과율이 24.2%로 건고추 수확량도 증가하였다. 장마철 고추역병(Phytophthora capsici)은 장마가 끝난 무피복시험구에서 8월 11일 15%이었으며 고온기를 지난 9월 7일에는 발병율이 74%로 수확을 포기하였으나, 파이투패치를 코팅처리한 피복재를 씌운 시험구에서는 발병주가 2.3%로 장마철 역병발생이 효과적으로 방제되었다.

• Journal of Oral Medicine and Pain
• /
• 제25권4호
• /
• pp.355-364
• /
• 2000

This study was to find dental materials causing hypersensitivity reactions by carrying out patch tests in the patients with oral mucosal lesions to investigate the possibility of hypersensitivity reactions in etiology of oral mucosal lesions. 31 patients (female 26, male 5, age range 24-72 years) with oral mucosal lesions were classified as patient group, and 41 volunteers (female 24, male 17, age range 23-40 years) without oral mucosal lesion, systemic disease and history of allergy as control group. The obtained results were as follows: 1. There were various dental restorations in most of patient group and control group, 29(94%) in 31 patient group, 35(85%) in 41 control group. 2. Among sites of oral mucosal lesions, buccal mucosa was the most common site with 60%, followed by gingiva with 24%, tongue with 16%. Lesions in contact with restorations were highly 90% in tongue and 89% in buccal mucosa, but comparatively lower 53% in gingiva. 3. The ratio of positive reactions to the patch test in patient group was significantly higher than the control group (p<0.05). 4. Dental materials causing positive reactions to the patch test were mainly mercury(19%), potassium dichromate(16%), cobalt chloride(16%) in patient group, cobalt chloride(17%) in control group. 5. In 20 patients with lichen planus, 8 patients(40%) showed positive reactions to the patch test.

• Weed & Turfgrass Science
• /
• 제3권4호
• /
• pp.378-381
• /
• 2014

Zoysiagrass는 대표적인 난지형 잔디로 Curvularia leaf spot, Large patch, Rhizoctonia blight, Spring dead spot, 그리고 Dollar spot 등의 다양한 병에 직면해 있으며 최근에는 많은 병원균들의 복합 감염에 의한 잔디병 양상을 보이고 있다. 최근에 패취형태의 병반을 가진 zoysiagrass 엽조직으로 부터 Rhizoctonia 속과 유사한 곰팡이를 분리하였다. 리보소옴 DNA의 염기서열을 분석하여 Waitea circinata 균주들과 98% 이상의 상동성을 보였고, Koch's 법칙에 따라 zoysiagrass에서 병원성을 확인하여 이 병의 주 원인균은 Waitea circinata로 판명되었다. 따라서 본 병은 zoysiagrass에서 Waitea circinata에 의해 최초로 국내에서 발생한 병으로 사료되며, 기본 병명과 동일하게 Waitea ring patch로 사용하기를 제안하고자 한다.

• Structural Engineering and Mechanics
• /
• 제11권3호
• /
• pp.325-340
• /
• 2001

This paper addresses an efficient modification method that eliminates the undesirable effects of strains due to various non-conforming modes so that the non-conforming element can pass the patch test unconditionally. The scheme is incorporated in the element formulation to establish new types of non-conforming hexahedral elements designated as NHx and NVHx for the regular element and variable node element, respectively. Non-conforming displacement modes are selectively added to the ordinary (conforming) element displacement assumptions to improve the bending behavior of the distorted solid element. To verify the validation of proposed direct modification method and the improvement of element behavior, several numerical tests are carried out. Test results show that the proposed method is effective and its applications to non-conforming solid elements guarantee for the element to pass the patch test.

• Safety and Health at Work
• /
• 제3권2호
• /
• pp.101-103
• /
• 2012

To identify the allergy problem of a 36-year old swimming instructor, who experiences heavy itching and rashes whenever she comes in contact with pool water. Patch tests were performed with European standard series and materials from the work floor. A positive patch test to aluminum chloride and flocculant was observed. Occupational dermatitis is, based on a contact allergy to aluminum chloride in the flocculant.