• 제목/요약/키워드: Patch Information

검색결과 829건 처리시간 0.025초

Design of Broadband Microstrip Patch Antenna for Mobile Communications

  • Kim, Jang-Wook;Jeon, Joo-Seong
    • 한국컴퓨터정보학회논문지
    • /
    • 제22권4호
    • /
    • pp.67-74
    • /
    • 2017
  • The objective of this paper is to design broadband microstrip patch antenna for mobile communication service. The enhanced features were confirmed and proved by comparing the proposed antenna with the antennae that have been reported in the relevant literatures. The experimental results show that the impedance bandwidth(VSWR ${\leq}2$) of 19.6%(fo=1,920MHz) and the peak gain of 5.53dBi(at 1,900MHz) were obtained by the mobile communication service frequency band. The proposed antenna had the impedance bandwidth of about 3.1% larger than that of the reported microstrip antenna.

Design of a High Performance Patch Antenna for GPS Communication Systems

  • Hamedi-Hagh, Sotoudeh;Chung, Joseph;Oh, Soo-Seok;Jo, Ju-Ung;Park, Noh-Joon;Park, Dae-Hee
    • Journal of Electrical Engineering and Technology
    • /
    • 제4권2호
    • /
    • pp.282-286
    • /
    • 2009
  • This paper presents the design of a patch antenna for GPS portable devices. The antenna is designed to operate at Ll band on an FR4 PCB with a thickness of 1.6mm, a dielectric constant of 3.8 and two metallization layers. The antenna has a dimension of 49mm${\times}$36mm and operates at 1.5754GHz with a return loss of -36dB and a measured bandwidth of 250MHz.

폭이 좁아진 주 패치와 U자 형태의 기생 패치를 이용한 소형화된 광대역 기생 패치 안테나 설계 (Design of Miniaturized Broadband Parasitic Patch Antenna Using Reduced Size Main Patch with U-Shaped Parasitic Patches)

  • 위상혁;김우태;홍영표;육재림;육종관
    • 한국전자파학회논문지
    • /
    • 제18권4호
    • /
    • pp.389-397
    • /
    • 2007
  • 본 논문은 크기가 소형화된 광대역 기생 패치 안테나를 제안한다. 폭이 좁아진 주 패치의 두 방사 모서리부에 U자 형태의 기생 패치를 설계하여 안테나 전체 크기를 감소시키고, 주 패치와 기생 패치 사이의 E-plane 및 H-plane을 통한 electromagnetic coupling에 의해 광대역 특성을 얻는다. 안테나 방사 소자들의 전체 크기는 $18{\times}17.6\;mm^2$ 이고, 접지면과 유전체를 포함한 전체 크기는 $25{\times}30{\times}4\;mm^3$이다. 설계된 안테나는 FR4 유전체를 이용해 제작하였으며, 5.12 GHz와 6.08 GHz의 공진 주파수와 5.5 GHz 중심 주파수를 기준으로 27.3 %(1.5 GHz)의 대역폭을 갖는다. 측정된 안테나의 방사 패턴은 일반적인 마이크로스트립 패치 안테나와 유사하다.

패턴 변환 루프 구조를 가지는 마이크로스트립 패치 안테나 (Pattern-Switchable Microstrip Patch Antenna with Loop Structure)

  • 김용진
    • 한국산학기술학회논문지
    • /
    • 제13권11호
    • /
    • pp.5447-5451
    • /
    • 2012
  • 본 논문은 마이크로스트립 패치 안테나에 루프구조를 추가하여 방사패턴의 변환이 가능한 안테나를 제안한다. 패턴 변환을 위한 루프 구조를 패치 안테나의 급전부와 연결하며, 스위치 on/off 에 따라서 안테나의 방사패턴이 가변되는 구조가 된다. 제안된 안테나의 동작주파수는 2.4GHz이며, 최대이득은 3.2dBi 이다. MIMO (Multi-Input Multi-Output), WLAN등의 무선통신 시스템에서 diversity나 스마트 안테나 시스템에 장착을 목적으로 한다. 제안된 안테나의 patch 사이즈는 $28mm{\times}28mm$이며, ground plane의 사이즈는 $40mm{\times}50mm$이다. 제안된 안테나는 2층의 적층 구조를 하고 있으며, 스위치 on/off 동작에 의해 안테나의 패턴이 가변됨을 시뮬레이션과 측정을 통하여 보였다.

E-면으로 직접 결합된 마이크로스트립 어레이 안테나 (Mecrostrip Array Antenna Directly Coupled to E-Plane)

  • 김태형;홍재표;박진택;조영기;손현
    • 전자공학회논문지A
    • /
    • 제28A권1호
    • /
    • pp.23-29
    • /
    • 1991
  • In order to improve the radiation characteristics of the microstrip antenna, microstrip array antenna consisting of one center patch fed by a coaxial probe and several patches directly coupled to the E-plane by microstrip line is analyzed. The equivalent circuit of the array antenna is represented by the conventional transmission line and the various parameters, such as the mdicrostrip line length, the patch length and the feed point location are calculated to improve the radiation pattern for 5-patch array antenna which has the equal patch width. The 5-patch array antenna with the radiation pattern which has low sidelobe level and narrow beam width is fabricated and then the measured results are compared with the computed values and the results of the single patch microstrip antenna too.

  • PDF

Inductor Loaded 패치안테나를 이용한 2 소자 배열 안테나의 상호결합 특성 (Mutual Coupling Characteristics of a 2-element Array Antenna using Inductor Loaded Patch Antennas)

  • 김군수;김태영;윤영민;김부균
    • 대한전자공학회논문지TC
    • /
    • 제48권4호
    • /
    • pp.92-99
    • /
    • 2011
  • Inductor loaded 패치안테나를 이용한 2 소자 배열 안테나의 기판 크기에 따른 상호결합 특성에 대하여 연구하였다. Inductor loaded 패치안테나를 각각 E-평면과 H-평면상에 배열하여 상호결합 특성을 비교하였다. Inductor loaded 패치안테나를 이용한 배열 안테나는 배열 방향에 상관없이 두 안테나 소자 간의 상호결합 크기가 매우 작았고 상호결합이 작게 발생하는 패치안테나의 중심과 E-평면방향의 기판 가장자리까지의 거리가 유사한 값을 가짐을 알 수 있었다.

저고도각 고이득 특성을 이용한 3 소자 CRPA 배열 안테나 설계 (Design of Three-elements CRPA Arrays Using Improved Low-elevation Gain)

  • 류성준;변강일;이준용;추호성
    • 한국위성정보통신학회논문지
    • /
    • 제12권2호
    • /
    • pp.83-88
    • /
    • 2017
  • 본 논문에서는 저고도각 고이득 특성을 이용한 3 소자 CRPA 배열 안테나 설계를 제안하였다. 제안된 안테나는 급전패치와 방사패치로 구성되어 있으며, 급전패치에 동축케이블을 통해 급전부가 직접 연결되고 방사패치에 전자기적으로 간접급전되어 저고도각 이득 특성이 개선되는 구조를 가진다. 제안된 배열안테나의 성능 측정을 전파무반사실에서 수행하였으며, 전면 방향 이득은 2.8 dBic, 축비 특성은 2.7 dB, $75^{\circ}$의 저고도각 평균 이득이 -1.4 dBic를 나타내어 항재밍 성능을 갖는 CRPA 안테나로 적합함을 확인하였다.

WLAN용 이중대역 브리지 패치 안테나설계 및 제작 (Design and Fabrication of Dual-Band Patch Antenna with Bridge for WLAN Applications)

  • 김갑기
    • 한국정보통신학회논문지
    • /
    • 제14권3호
    • /
    • pp.547-551
    • /
    • 2010
  • 본 논문에서는 4개의 브라지를 가진 두 개의 사각형 패치로IEEE 802.11b/g(2.4GHz)와 802.11a(5.7GHz)의 해석을 연구하였다. 5.7GHz 대역의 사각형 패치는PCB기판에 인쇄되어 있고, 4개의 브리지를 포함하는 2.4GHz 대역의 사각 형 패치를 연결하여 이중대역 안테나로 동작한다. 제안된 안테나는 간단한 구성으로 $50{\Omega}$의 동축케이블에 의해 급전된다. 설계 되어진 안테나의 기판의 유전율은 $\varepsilon_r$ = 3.27이며, 2.4GHz와 5.7GHz의 공진주파수를 갖는 두 개의 사각 패치를 4개의 브리지를 이용하여 연결함으로써 이중대역의 특성을 나타나게 하였다. 제안된 안테나는 무선랜의 2.4GHz와 5.7 GHz의 이중대역에서 -10dB이하의 입력대비 반사손실의 결과를 얻었다.

GPS 방해신호 회피용 5-패치 배열 안테나 설계 (Design of a 5-patch GPS array antenna for anti-jamming)

  • 채규수;임중수
    • 디지털융복합연구
    • /
    • 제11권12호
    • /
    • pp.417-422
    • /
    • 2013
  • 본 논문에서는 GPS용 패치 안테나를 이용하여 안테나 빔의 방사패턴을 조정하는 방법에 대해 기술되었다. 안테나는 5개의 세라믹 기판에 구현된 전형적인 원형편파 패치 안테나를 사용 하였으며 PCB기판위에 배열 안테나로 제작 되었다. 안테나 배열은 가운데 하나의 요소가 배치되고 4개의 요소는 각 코너에 배치되는 구조이다. 특정한 방향으로 GPS방해 신호가 도래 한다고 가정하고 그 방향의 안테나 방사 전력을 최소화 하는 방법을 제시하였다. CST MWS를 이용하여 시뮬레이션 하였으며 이를 기초로 안테나가 제작 되었고 기본적인 특성들이 측정되었고 그 결과가 제시되었다. 본 연구의 결과들을 살펴보면 방해전파 송신기로부터 방사되는 특정 방향의 방해신호를 본 연구에서 제안하는 안테나를 사용하여 충분히 제거 할 수 있는 것을 알 수 있다.

국내 한방 패치 특허 현황에 대한 분석연구 (Herbal Patch Analysis in Korean Patent)

  • 박선주;우성천;박지연
    • 대한예방한의학회지
    • /
    • 제22권1호
    • /
    • pp.45-59
    • /
    • 2018
  • Objectives : The purpose of this study is to present trends and contents of herbal Korean Medicine patches by analyzing the herbal patches in Korean patents. Methods : Electronic search for herbal patch patents was conducted in KIPRIS (Korea Intellectual Property Rights Information Service). Korean patents that were registered by January 1, 2018 were selected in study. Patents that were not using herbal medicine or not related to patch were excluded in this study. The applicant, application date, International Patent Classification (IPC), contents and adhesive site of patches, target diseases, model of experiment and extraction methods were analyzed. Results : A total of 17 patents were included in this study. In applicant analysis, 61.5% of applicants were corporations. All IPCs in patents were involved in Section A (Human necessities & Agriculture) and 66.7% of IPCs were A61K (Preparations formedical, dental, ortoiletpurposes). In types of patch, 8 patents were hydrogel patches (47.1%), followed by 3 heating patches (17.6%). Skin related symptoms were the most targeted diseases (52.9%), Human was the most used model in experiments. Solvent extraction and hot water extraction were used frequently, and some patents had no limit for extraction were also existed. Conclusions : The study results will be helpful to diversify formulation of herbal medicine, to expand market scale of patent and to develop new application using Korean medicine. In order to establish sufficient data for utilizing patent technologies, more patent studies providing analyzed patent information are needed.