• 제목/요약/키워드: Passive output filter reduction

검색결과 5건 처리시간 0.022초

An Active Output Filter with a Novel Control Strategy for Passive Output Filter Reduction

  • Choi, Kyusik;Cho, Bo-Hyung
    • Journal of Power Electronics
    • /
    • 제16권3호
    • /
    • pp.1036-1045
    • /
    • 2016
  • This paper presents a novel control strategy for passive output filter reduction using an active output filter. The proposed method achieves the dual-function of regulating the output voltage ripple and output voltage variation during load transients. The novel control strategy allows traditional simple voltage controllers to be used, without requiring the expensive current sensors and complex controllers used in conventional approaches. The proposed method is verified with results from a 125-W forward converter.

DVR시스템에 사용되는 인버터부의 LC필터 설계와 피드백 성능분석 (Design and Feedback Performance Analysis of the Inverter-side LC Filters Used in the DVR System)

  • 박종찬;손진근
    • 전기학회논문지P
    • /
    • 제64권2호
    • /
    • pp.79-84
    • /
    • 2015
  • Voltage sags are considered the dominant disturbances affecting power quality. Dynamic voltage restorers(DVRs) are mainly used to protect sensitive loads from the electrical network voltage disturbances such as sags or swells and could be used to reduce harmonic distortion of ac voltages. The typical DVR topology essentially contains a PWM inverter with LC Filter, an injection transformer connected between the ac voltage line and the sensitive load, and a DC energy storage device. For injecting series voltage, the PWM inverter is used and the passive filter consist of inductor(L) and capacitor(C) for harmonics elimination of the inverter. However there are voltage pulsation responses by the characteristic of the LC passive filter that eliminate the harmonics of the PWM output waveform of the inverter. Therefore, this paper presented design and feedback performance of LC filter used in the DVRs. The voltage control by LC filter should be connected in the line side since this feedback method allows a relatively faster dynamic response, enabling the elimination of voltage notches or spikes in the beginning and in the end of sags and strong load voltage THD reduction. Illustrative examples are also included.

H-Bridge 7레벨 인버터를 이용한 유도전동기 구동시스템의 노이즈 저감을 위한 출력 필터설계 (Output Filler Design for Noise Reduction of Induction Motor Drive System using H-Bridge 7-Level Inverters)

  • 김수홍;안영오;김윤호;방상석;김광섭
    • 조명전기설비학회논문지
    • /
    • 제20권3호
    • /
    • pp.36-44
    • /
    • 2006
  • 일반적으로 PWM인버터에 발생된 고조파와 노이즈는 스위칭 주파수, dv/dt와 di/dt, PWM 스위칭 방법에 의해 영향을 받는다. 멀티레벨 인버터가 고전력 시스템에 적용되어 낮은 주파수에서 동작할 때 이것은 큰 고조파 성분과 노이즈를 발생하게 된다. 따라서 멀티레벨 인버터에 출력 필터가 요구된다. 본 논문에서는 H-bridge 7레벨 인버터 시스템을 사용한 3상 유도 전동기 구동 시스템의 고조파와 노이즈 감소를 위해 출력 필터를 설계하였다. 가격이 저렴하고 간단한 구조를 가지며, 고조파와 노이즈를 효과적으로 감소시킬 수 있는 수동필터는 멀티레벨 인버터 시스템을 사용한 3상 유도전동기 구동시스템에 적용되었다. 설계된 시스템은 향상되었고, 시뮬레이션과 실험을 통해 그 타당성을 증명하였다.

필터소자의 용량 저감을 고려한 다이오드 정류기의 입력LC필터 설계 (Input LC Fiter Design of Diode Rectifiers Considering Filter VA Rating Reduction)

  • 임영철;정영국
    • 조명전기설비학회논문지
    • /
    • 제12권1호
    • /
    • pp.35-44
    • /
    • 1998
  • 본 연구에서는 전류스트레스 및 필터소자의 용량저감을 고려한 다이오드 정류기의 입력LC필터 설계법을 기술하였다. 입력교류전류의 제3고조파 성분에 대하여 무한한 임피던스를 갖도록 LC병렬 공진회로와 출력측 직류콘덴서로 구성된 새로운 필터를 단위법(Per Unit)에 의해 설계하였다. 제안된 LC필터를 다이오드정류기에 적용하여 정상상태에서 실험한 결과, 입력교류전류의 제3고조파성분을 8.8〔%〕로 감소시켰으며, 입력역률은 종전의 표준형의 입력역률이 0.76인데 비하여 0.913으로 개선시켰다. 또한 필터소지자의 전압.전류용량감소와 함께, 설계된 입력LC필터는 다이오드 정류기계통에 악영향을 미치지 않았으며, 따라서 종래의 표준형 LC필터에 의한 방법과 비교하여 제안된 방법이 83.5〔%〕의 저용량의 필터로도 고역률의 정류가 가능함을 입증하였다.

  • PDF

Comparison of the harmonic reduction by using harmonic passive fitters and technique of intervene firing method at the pulse of the 6-pulse phase controlled converter.

  • Wongtongdee, Surached W.;Laohasongkram, Pipat
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 2005년도 ICCAS
    • /
    • pp.782-785
    • /
    • 2005
  • This article introduces technique to reduce harmonic by using the $5^{th}$ and $7^{th}$ harmonic tune filter and line reactor in the comparison to the technique of intervening firing method at the pulse of the 6-pulse phase-controlled converter in every 1/6 period. The design of the technique introduced in this article is to reduce the harmonic distortion of the current and the voltage resulted from three-phase thyristor phase-controlled converter. The waveform obtained from the experiment was analyzed on the spectrum of the current, voltage and the total harmonic distortion. The double firing method causes zero vectors of output voltage and input current. Designing the mechanism of the converter based on the idea of Park Vector Theory, the number of harmonic distortion in the intervening firing method were compared to those in normal firing method.

  • PDF