• The Journal of the Acoustical Society of Korea
• /
• v.39 no.1
• /
• pp.38-46
• /
• 2020

LOw Frequency Analysis Recording (LOFAR) and Demodulation of Envelop Modulation On Noise (DEMON) grams are bearing-time-frequency plots of underwater acoustic signals, to visualize features for passive sonar. Those grams are characterized by tonal components, for which conventional data coding methods are not suitable. In this work, a novel LOFAR/DEMON gram compression algorithm based on binary map and prediction methods is proposed. We first generate a binary map, from which prediction for each frequency bin is determined, and then divide a frame into several macro blocks. For each macro block, we apply intra and inter prediction modes and compute residuals. Then, we perform the prediction of available bins in the binary map and quantize residuals for entropy coding. By transmitting the binary map and prediction modes, the decoder can reconstructs grams using the same process. Simulation results show that the proposed algorithm provides significantly better compression performance on LOFAR and DEMON grams than conventional data coding methods.

• The Journal of the Acoustical Society of Korea
• /
• v.32 no.6
• /
• pp.532-540
• /
• 2013

In this paper, we propose the modified SED (Subband Energy Detection) which can assign weights adapting to the receiving signal level for the broadband energy detection in the passive SONARs. SED which is one of the broadband processing mainly employed by passive SONARs to detect a target is more robust against interference like multi signals or a clutter than CED (Conventional Energy Detection), but it degrades detection performance to assign weights independent of extracted extrema level of the receiving signal. Therefore, in this paper, the weighting method which can efficiently assigns rewards or penalties adapting to extracted extrema level of the receiving signal is proposed. In order to evaluate the performance of proposed method, we conducted experiments by using simulation and real ocean acoustic signal which is acquired from Yellow Sea. From the experiments, our proposed method has shown better performance than conventional SED.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.227-231
• /
• 2014

Underwater radiated noise is one of the vital factors in underwater weapon systems like submarine. A passive elastic mount is an effective reduction method for the vibration from a ship-board machinery transmitted to the hull which is radiated as noise outside the hull. A passive elastic mount shows the limitation on the vibration reduction and needs multi stage mounting system including double stage one to meet the required underwater radiated noise criteria. It is necessary for the multi stage mounting system to consider the large displacement in the underwater shock explosion. So it is difficult to apply the multi stage mounting system in submarine because of space limitation. Also recent navy sonar system are trying to have the capability to detect the ship-borne acoustic signals in the low frequency range. An alternative to the passive mount is an active mount with moving-coil type electromagnetic actuator based on a conventional rubber mount in the low frequency range. In the previous paper, 4 active mounts with moving-coil type electromagnetic actuator based on the rubber mount were installed on the hard floor of the facility, which means no consideration on the elastic foundation effect for the control of the active mounts was taken into account. In this study, an experimental performance analysis on the active mount was carried out using 4 active mounts installed on the cylindrical structure to investigate the elastic foundation effect.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.1E
• /
• pp.7-13
• /
• 2001

In this paper we propose a new subspace tracking algorithm based on the PASTd (Projection Approximation Subspace Tracking with deflation). The algorithm is obtained via introducing the variable forgetting factor which adapts itself to the time-varying subspace environments. The tracking capability of the proposed algorithm is demonstrated by computer simulations in an abruptly changing DOA scenario. The estimation results of the variable forgetting factor PASTd(VFF-PASTd) outperform those of the PASTd in the nonstationary case as well as in the stationary case.

• Proceedings of the KIEE Conference
• /
• 1991.07a
• /
• pp.888-891
• /
• 1991

In this paper, we have shown a new approach of neural networks for mobile robot motion control under an indoor refracted environment. The vehicle has two powered wheels and four passive casters which support a free motion. And it also uses sonar sensors, infrared sensors, Internal odometer, and contact sensors. Two experiments were conducted to demonstrate our objectives. The first one is that the vehicle executes a reflexive motor control to maintain a constant distance to the boundary. The second one is that as well as the boundary following, the vehicle makes a block obstacle avoidance during its path. Without prior knowledge of external environment. we have accomplished the tasks by employing a simple, reactive stimulus-response neural network scheme associating sensor data with the vehicle's action.

• Journal of Biomedical Engineering Research
• /
• v.28 no.3
• /
• pp.363-368
• /
• 2007

Most surgery illumination systems have been developed as passive systems. However, sometimes it is inconvenient to relocate the position of the illumination system whenever the surgeon changes his pose. To cope with such a problem, this study develops an auto-illumination system that is autonomously tracking the surgeon's movement. A 5-DOF serial type manipulator system that can control (X, Y, Z, Yaw, Pitch) position and secure enough workspace is developed. Using 3 ultrasonic sensors, the surgeon's position and orientation could be located. The measured data aresent to the main control system so that the robot can be auto-tracking the target. Finally, performance of the developed auto-illuminating system was verified through a preliminary experiment in the operating room environment.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.06e
• /
• pp.133-136
• /
• 1998

The aim of the work described in this paper is to develop a complex underground acoustic system which detects and locates the origin of an underground hammering sound using an array of six hydrophones located about 100m underground. Two different methods for the sound localization will be presented, a time-delay method and a power-attenuation method. In the time-delay method, the cross correlation of the signals received from the array of sensor sis used to calculate the time delays between those signals. In the power-attenuation method, the powers of the received signals provide a measure f the distances of the source from the sensors.

• The Journal of the Acoustical Society of Korea
• /
• v.15 no.6
• /
• pp.104-109
• /
• 1996

In passive sonar system, frequency lines generated by underwater target are very important for detection, tracking and classification. In this paper, the extraction method of unstable frequency line from the time samples of the radiated noise of underwater target is studied. As unstable frequency line is time varying, an extended Kalman filter algorithm which is desirable for nonlinear system is applied to extract unstable frequency line. The proposed method shows good extraction of unstable frequency line by application of simulated signal and real target.

• Proceedings of the KSRS Conference
• /
• 1998.09a
• /
• pp.138-148
• /
• 1998

The aim of the work described in this paper is to develop a complex underground acoustic system which detects and localizes the origin of an underground hammering sound using an array of hydrophones located about loom underground. Three different methods for the sound localization will be presented, a time-delay method, a power-attenuation method and a hybrid method. In the time-delay method, the cross correlation of the signals received from the way of sensors is used to calculate the time delays between those signals. In the power-attenuation method, the powers of the received signals provide a measure of the distances of the source from the sensors. A new hybrid method has been developed for estimating the origin of the underground acoustic source by coupling both methods. The Nelder-Meade simplex search algorithm is then used to numerically estimate the position of the source in those methods. For each method the sound localization is carried out in three dimensions underground. The distance between the true and estimated origins of the source is in some cases less than 6m for a search area of radius 250m.

• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2102-2104
• /
• 2002

Batch estimation 알고리듬은 수집된 표적에 대한 모든 정보들을 사용하여 상태변수의 초기값을 추정하게 되며 그 구간동안 표적이 일정한 속도로 움직이고 표적 음원의 주파수는 그 값이 항상 일정하다는 가정을 했다. 본 논문에서는 이러한 가정을 위배하는 표적 음원의 주파수 변화에 대해 대처하기 위한 각도와 주파수정보를 이용하는 Batch estimation 알고리듬과 각도정보만을 사용하는 Batch estimation 알고리듬의 경우를 표적 음원의 주파수 변화를 감지하여 스위칭 할 수 있는 방법에 대해 알아본다.