• Journal of Power Electronics
• /
• 제16권3호
• /
• pp.1236-1243
• /
• 2016

This paper presents the analysis and design of an active electromagnetic interference (EMI) filter (AEF) for the common-mode (CM) noise reduction of switching power converters. The features of the several types of AEFs are discussed and compared in terms of implementation. The feed-forward AEF with a voltage-sensing and voltage-cancellation (VSVC) structure is implemented for an LLC resonant converter to replace a multiple-stage passive EMI filter and thereby reduce CM noise. The characteristics and performance of the VSVC-type AEF are investigated through theoretical and experimental works.

• 한국음향학회지
• /
• 제20권7호
• /
• pp.13-20
• /
• 2001

소음제어기술은 산업현장에서 발생되는 소음을 감소시키기 위해 사용된 고전적인 방법이다. 능동적인 소음 감쇠기는 수동적인 소음 감쇠기에 비해 많은 이점을 가지고 있으며, 특히 능동적인 소음 감쇠시스템은 낮은 대역의 주파수 영역에서 소음감쇠 성능이 우수하고, 소형, 경량으로 설계할 수 있는 이점이 있다. 본 논문에서는 수동적인 소음감쇠기로 헬멧을 사용하여 외부 소음을 감소시킨 후 헬멧 내에서의 소음을 제어할 수 있는 능동 소음 감쇠시스템을 제안한다. 제안된 능동적인 소음 감쇠시스템은 위상 지연 보상과 반전 회로와 외부 소음을 감지할 수 있는 마이크로폰과 외부 소음을 줄이기 위해 반전된 위상을 발생하는 스피커로 구성되어 있다. 그리고 소음감쇠 성능을 향상시키기 위해서 위상천이기를 사용하여 진폭응답곡선에서 최대가 되는 주파수에서 위상차가 180°가 되도록 위상을 보정하여 소음을 저감했다 본 논문에서 개발된 시스템은 위상 지연이 50°와 310°사이에 존재하는 소음이 감소되었다. 이 시스템으로 인한 소음 감쇠는 약 20 dB의 감쇠 결과를 얻었다.

• 한국소음진동공학회논문집
• /
• 제15권8호
• /
• pp.891-896
• /
• 2005

On the basis of theoretical studies on the effect of the cylinders attached to semi-infinite screens, the tangential sound power-transport parallel to the surface of the attached cylinder is minimized by means of a secondary sound field, which is generated from a part of the attached cylinder. The numerical study shows the possibility of deflecting the incident sound by minimizing the sound field of the upper sections. The acoustical shadow region was more pronounced in both near- and far-field compared to the passive case with rigid surface, i.e. without active control. For a relatively wide frequency range it was possible to enhance shielding effects only with few secondary sources and error microphones. In this paper effects of control parameters on the actively controlled sound field near the top edge of noise barriers are studied. Results of numerical study and model measurements are shown and discussed.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.482-485
• /
• 2004

On the basis of theoretical studies on the effect of the cylinders attached to semi-infinite screens, the tangential sound power-transport parallel to the surface of the attached cylinder is minimized by means of a secondary sound field, which is generated from a part of the attached cylinder. The numerical study shows the possibility of deflecting the incident sound by minimizing the acoustic surface impedance of the upper sections. The acoustical shadow region was more pronounced in both near- and far-field compared to the passive case with rigid surface, i.e. without active control. For a relatively wide frequency range it was possible to enhance shielding effects only with few secondary sources and error microphones. In this paper effects of some control parameters on the actively controlled sound field near the top edge of noise barriers are studied. Results of numerical study and model measurements are shown and discussed.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.233-236
• /
• 2005

Phase noise in a phase-locked-loop (PLL) is unwanted and unavoidable. It is a main concern in oscillation system especially PLL. The phase noise is derived in term of power spectrum density by using a reliable phase noise model. There are four noise sources being considered in this paper, which are generated by reference oscillator, voltage controlled oscillator, filter, and main divider. The major concern for this paper is the noise from the filter. Two types of second order low pass filter are used in the PLL system. Applying the mathematical phase noise model, the output noises are compared. The total noise from the passive filter is lower than the active filter at the offset frequency range between 1 Hz to 33 kHz.

• Journal of Biosystems Engineering
• /
• 제20권2호
• /
• pp.127-132
• /
• 1995

In the first part of this paper, an analysis of the cab noise of a selected agricultural tractor was presented. In this study, using the results of the previous analysis, two passive noise control measures of the sound insulation and absorption were conducted to reduce the noise level inside the cab. These measures of noise control reduced the total noise level by 6.2㏈(A) at the operator position inside the cab. In order to further reduce the cab noise, particularly, of lower frequencies than 630Hz, stiffness and damping of the floor panel should be enforced. It was also suggested that a proper suspension for the cab mounting is necessary to reduce the level of structure-born noises.

• 해양환경안전학회지
• /
• 제29권6호
• /
• pp.620-627
• /
• 2023

선내 소음은 선원의 거주성과 건강을 위한 중요한 요소 중의 하나로, 선내 소음을 줄이기 위한 노력이 활발하게 진행되고 있다. 소음 저감 방법에는 수동소음제어(PNC) 방법과 능동소음제어(ANC) 방법이 있다. 자동차, 항공기와 달리 선박에서는 ANC를 이용한 소음 저감 대책이 미미한 실정이다. 본 연구는 능동소음제어(ANC)와 같이 방음판과 고주파진동원을 이용하여 기관실에 발생한 소음을 줄이고자 하였다. 이를 위해 아크릴 상자를 이용하여 실험 모형을 만들었고, 4가지 조건별로 소음 저감 효과를 측정하였다. 실험 결과는 다음과 같다. 첫째, 방음판은 55 dB ~ 85 dB까지 모든 범위에서 소음 저감 효과가 있었다. 고주파진동원은 낮은 소음에서 효과가 없었으나, 70.8 dB(A)과 85 dB(A)와 같은 높은 소음에서는 효과가 있었다. 둘째, 방음판과 고주파진동원을 동시에 사용하는 경우에는 최대 -2.2 dB(A) 만큼의 소음 저감 효과가 있었다. 본 실험의 결과는 아크릴판으로 제작한 실험모형에서 얻은 결과로 철판으로 된 실제 선박과 다를 수 있다. 추후 연구에서 실제 선박에서 사용하는 철판(재질과 두께, 구조를 고려)을 이용하여 실험하고자 한다. 이 연구가 선박에 승선하는 선원들의 거주성 향상과 건강 증진에 도움이 되기를 기대한다.

• 한국소음진동공학회논문집
• /
• 제21권1호
• /
• pp.56-65
• /
• 2011

A new hybrid mount system is proposed for microvibration control in a high-tech factory. The mount consists of an airspring as a passive device and a piezostack actuator as an active device. The two devices are connected in series. Some numerical simulations and experimental tests are carried out to evaluate isolation performance of the mount system comprising of four proposed hybrid mounts. As a control logic, the specific algorithm is adopted for considering multiple target frequencies of excitation based on a Filtered-X LMS algorithm. The results are compared with isolation performance of the passive airspring mount system. It is confirmed that the proposed hybrid mount system has great performance on microvibration.

• 한국소음진동공학회논문집
• /
• 제16권12호
• /
• pp.1252-1261
• /
• 2006

This paper summarizes theoretical work on the multichannel decentralized feedback control of sound radiation from aircraft trim panels using piezoceramic actuators. The aircraft trim panels are generally honeycomb structures designed to meet the design requirement of low weight and high stiffness. They are resiliently-mounted to the fuselage for the passive reduction of noise transmission. It is motivated by the localization of reduction in vibration of single channel active trim panels. 12-channel decentralized feedback control systems are investigated in terms of the reduction of noise and vibration for three configurations of sensor actuator pairs. Local coupling of the closely-spaced sensor and actuator pairs was modeled using single degree of freedom systems. The multichannel control system is characterized using the state-space model. For the stability point of view, the relative stability or robustness is evaluated by comparing the real part of eigenvalues of the system matrix for the three configurations. The control performance is also evaluated and compared for the three configurations. It is found that the multichannel system can lead to the globalization of the reduction in vibration and radiated noise. It does not appear to yield a significant improvement in the vibration because of decreased gain margin. However, the reduction in the radiated noise is remarkably improved due to the variation of the vibration pattern with the actuation configurations.

• 한국소음진동공학회논문집
• /
• 제12권5호
• /
• pp.374-379
• /
• 2002

A new active muffler system has been developed and its superior performance on both noise reduction and engine torque increase is demonstrated with experiment. Main characteristic of the proposed muffler system is the use of destructive interference by transmission path difference of divided exhaust pipes to reduce major exhaust noise components thereby overcoming problems of other active exhaust noise control methods. The exhaust pipe is divided into two sections and joined again downstream. One divided pipe has a sliding mechanism to vary its length, which is controlled to make half wavelength transmission path difference for the major engine rpm frequency. In this system one divided pipe is used to control major rpm frequency and its Harmonics and another pipe is used to control noise component double the frequency of rpm. An after-market tuning muffler, which has very simple internal structure and minimal back pressure, is also installed to remove remaining wideband noise. To make the system to be small enough to be practical, conventional muffler is also installed and used in low rpm range and active muffler is only employed in high rpm range. Noise reduction of the proposed system is comparable to conventional passive muffler. The engine dynamo test has proved the proposed system can recover almost all the torque lost by conventional muffler.