• 대한전기학회논문지:전력기술부문A
• /
• 제55권2호
• /
• pp.59-61
• /
• 2006

In our country most of transmission lines are double-circuit lines. In these lines, the combining method of increasing conductor height and installation of passive shield-loop to mitigate magnetic field near a transmission line, is a good and feasible method. The basic principle of passive shield loop is that the field from the current induced in the shield loop conductors counteracts the field from the phase conductors. This method applied to domestic transmission lines to meet the magnetic field level, 100, 30, 10 and 4 mG, respectively. In each magnetic field level, the minimum conductor height and passive loop height are presented for the implementation of the practical design.

• 대한전기학회논문지:전력기술부문A
• /
• 제54권5호
• /
• pp.234-241
• /
• 2005

The performance of passive conductor loop (hereinafter 'loop') method which is used to mitigate the magnetic field around overhead power transmission line is dependent on its configuration and installed location, which are affected by installation conditions of the loops such as objective areas and levels of magnetic field mitigation. Thus, because the design problem of loops is difficult and cumbersome by variety of their configuration and complexity of magnetic coupling mechanism, it is need to be formulated as a computer-based optimum problem to determine the most effective and reasonable loop model satisfying the installation conditions. In this paper, the optimum locations of the multi-wired multiple loops including series reactance compensations are searched by using the genetic algorithm (GA) to mitigate effectively the magnetic fields of relatively near points or far points from transmission line at Am height, and the magnetic fields mitigation characteristics of each loop are analyzed in the view of magnitude, direction and phase of cancellation fields by polarized vector concept to identify their adequacy and rationality for the installation objectives.

• 조명전기설비학회논문지
• /
• 제17권6호
• /
• pp.31-38
• /
• 2003

가공송전선로주변 자계저감 기법 중에서 수동루프 방식은 기존 송전철탑에 적은 비용으로 용이하게 적용되어 만족할 만한 저감효과를 제공할 수 있지만 수동루프에 유도되는 전류에 의해 송전손실이 증가될 뿐 아니라 송전선로의 기하학적 비대칭성이 증가됨으로써 상불평형이 증가하게된다. 따라서 본 논문에서는 수동루프 설치에 따른 송전손실과 송전선로 수전단에서의 상불평형을 모의하고자한다. 345[kV]급 수평 상배치 1회선 가공송전선로를 선정하여 수동루프를 송전선로의 선로정수에 포함시킨 비대칭 3상 분포정수 모델로 표현하였으며 이것에 대한 미분방정식을 정의하고 해를 구함으로써 수전단 3상의 전압과 전류를 계산했다. 그 결과로부터 각 상에 따라 전력손실이 다르게 발생하며 수전단에서 정상분이 감소하는 대신에 역상분이 증가함을 확인하였다. 일반적으로 수동루프에 의한 상불평형이 차지하는 비중이 크지는 않지만 수동루프 설치구간과 유도전류의 크기 등에 비례하여 증가하므로 수동루프 도입에 따른 소요비용을 산출하는 과정에서 그에 따른 영향을 포함시켜야 할 것으로 판단된다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 추계학술대회 논문집 전기설비전문위원
• /
• pp.5-7
• /
• 2005

When 345 kV transmission lines began to be operated in 1976,electrostatic shocks were problems due to high electric field. By reducing the electirc field below 3.5 kV/m, the problems were solved. But recently a transmission line route.is proposed, nearby people strongly object to build the line worrying abour the effect of magnetic field,even though they do not really know the megnetic effect. Some environmentalists insists to reduce to reduce the magnetis field to a few mG near the transmission line. So we have studied the mitigation method to reduce magnetic field by two conductor passive loop.