• Proceedings of the KSR Conference
• /
• 2002.10a
• /
• pp.497-502
• /
• 2002

TGIS(Train General Information System) is monitoring Train status and analyzing fault happened. TGIS informed a lot of Passenger data, Driving data, Status data and Fault data to 'Depot'. For dealing them more properly, TGIS need specified data and specialized data handling method. This paper suggest Optimize data of Train Monitoring System and Apply that to Main Line Car.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.394-399
• /
• 2004

Train is one of the most famous and convenient transporting ways. However, the noise problem caused by the train hinders people from living in a silent environment. Furthermore, this problem is related with the environmental rights of people nearby the railroad. The estimation of train noise is the pre-research of train noise reduction. This research is about measurement and analysis of train noise which can be a base-study about the estimation of train n(lise. The noise of ‘Mugungwha’ train, the most frequently used train in Korea, is the main object in this measurement and analysis. The characteristics of the train noise were evident in the criteria of height, distance and velocity. Furthermore, the noise differences between locomotive and passenger coach were observable.

• Proceedings of the KIEE Conference
• /
• 2007.10a
• /
• pp.397-398
• /
• 2007

Currently, most of Passenger Service System is supported to VOD in Korea. This current PSS has not internet access, real time broadcasting system and entertainment. The system did not come up to the expectation of consumer. This paper presents an application of new Passenger Service System for developing multimedia as well as wireless communication technology on internet, satellite broadcasting.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.1875-1880
• /
• 2003

Measurements of wind flow and pressure fluctuations induced by train passing on station platform have been conducted. Test conventional trains have a different nose shapes - bluff nose and wedged nose. The bluff nose train influence peak value of pressure fluctuations on station platform three times more than the wedged nose train for train speed of 108 km/h. Also, air flow induced by the bluff nose train passing is three times more than the wedged nose train passing. Current study shows that the gust induced by the bluff nose conventional train may threaten a passenger's safety on station platform in proximity to train passage.

• Proceedings of the KSR Conference
• /
• 2000.05a
• /
• pp.543-550
• /
• 2000

This study investigated and analysed the surface contaminant of the passenger car. Because the surface contaminants change the paint color of the passenger car, it is necessary to cleanse them for prolongating the maintenance period, Analysis method of the contaminant according to the kind of the passenger car, the line and the part of the train are systemized. Contamination mechanism and deterioration reason of paint colors on the surface of passenger car are studied. We expect that results of this study could contribute to providing of a fundamental research data, which is necessary for the development of a low-pollution passenger car cleanser.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11b
• /
• pp.35-38
• /
• 2005

It is widely recognized that train Is one of the most efficient and convenient ways for passenger and freight transportation. However, the environmental noise problem is occurred with the construction and service of train. The noise problems caused by train prevent people from living in a silent environment. Furthermore, this problem is related with the right to preserve one's environment. The objectives of this research are train noise measurement and analysis which might be a base-study for prediction of train noise. This paper mainly deals with the noise of the 'Semaul' train. The train noise shows distinct characteristics according to the variation of height and distance. Furthermore, the database and its interface program are developed for systematic analysis and future research.

• Proceedings of the KSR Conference
• /
• 2005.05a
• /
• pp.586-590
• /
• 2005

In order to compare the dynamic loading effects of particular trains it is necessary to use methodology that separates the two inherent aspects of the dynamic response of the total dynamic system-the characteristics of the train and a bridge. Because the train signature profile is a function of axle spacing and axle loads, it can be calculated which is independent of the characteristics of an individual bridge. Thus the use of the train signature enables a rapid comparison of the effects of different trains to be made. If the magnitude of train signature for a new train type is less than of existing trains on a route then the route will be satisfactory for the new train. This study presents a quantitative analysis of the dynamic loading effects for various domestic real trains-PMC8, PMC16, Mugunhwa passenger coach, several freight coach, KTX and TTX(Tilting Train Express)- Using the train signature.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.810-813
• /
• 2003

The present headway on KNR(Korea National Railway) lines varies from 6 to 10 minutes depending on the each line and by the operation of High Speed line in 2004, the bottleneck would be expected within a few sections such as Daejeon-Daejeon shunting yard which will be the common mute between KTX(Korea Train Express) and conventional trains. Therefore, KNR would like to reduce the headway of the all lines by 4 minutes with the implementation of ERTMS/ETCS on-board system. Where ETCS(European Train Control system), the subsystem of ERTMS, is Automatic Train Protection system for safety train running. This study will be analyze expected braking distance and running time depending on characteristics of conventional passenger and freight trains and high speed train will be operated within electrified conventional line for comparing the headways of ATS(Automatic Train Stop) system and ETRMS/ETCS system within the Daejeon-Daejeon shunting yard section.

• Journal of the Ergonomics Society of Korea
• /
• v.33 no.3
• /
• pp.215-227
• /
• 2014

Objective: The purpose of this study was to evaluate Korea's Honam express train's first- and second-class seat discomfort by using pressure measurement, subjective discomfort rating, and physical compatibility. Background: Over the years, the demand for an express train service is continually increasing. A comfortable ride is important to achieving passenger satisfaction. A train seat plays a significant role in fulfilling passenger seating comfort. With this in view, a field survey and pressure measurements were performed on the selected train seat. Method: The pressure ratio at the body-seat interface (thigh and buttock regions) was measured by the pressure mat system. The interface pressure ratio was calculated and compared. The subjective discomfort rating scale was used to evaluate the subjects' overall feeling. The dimensions of train seats were analysed according to the anthropometric and demographic characteristics of the population data from Size Korea. Results: The results highlighted that the interface pressure ratio was greater while participants sat on the second-class seat than the first-class seat in the left- and right-side thigh regions. Also the pressure ratio was greater for the participants in the 1st~25th percentile height groups (149.8~160.8cm). The subjects rated higher discomfort for the second-class seat than the first-class seat. The physical compatibility results showed that the second-class seat's breadth was inadequate for the 95th and 99th percentile male. Conclusion: Overall, interface pressure measurement, subjective discomfort score and physical compatibility results showed that the second-class seat was more uncomfortable for the passengers than the first-class seat. Application: The adopted methodologies could be used to measure the seating comfort of the train seats.

• Journal of computational fluids engineering
• /
• v.17 no.1
• /
• pp.23-28
• /
• 2012

The pressure transient inside the passenger cabin of high-speed train has been simulated using computational fluid dynamics(CFD) based on the axi-symmetric Navier-Stokes equation. The pressure change inside a train have been calculated using first order difference approximation based on a linear equation between the pressure change ratio inside a train and the pressure difference of inside and outside of the train. The numerical results have been assessed for the KTX train passing through a 9km long tunnel of Wonju-Kangneung line at the speed of 250km/h assuming that the train is satisfying the train specification for airtightness required by the regulation.