• Proceedings of the Korea Society of Design Studies Conference
• /
• 2000.11a
• /
• pp.82-83
• /
• 2000

G7 고속전철 개발사업의 진행은 고속전철개발 기본 준선 설정의 출발점인 승객에 대한 요구조건들이 간과된 채, 350km/h의ㆍ속도로 주행만을 위한 기술개발로 시작되었다. 그 결과, 승객 910명의 무게 72.8 톤이라는 화물에 대한 운송조건만이 고려되게 되었다. (중략)

• Proceedings of the KSR Conference
• /
• 2004.06a
• /
• pp.277-283
• /
• 2004

The time to ignition, heat release rate characteristics and carbon monoxide yield of fiber reinforced and sandwich phenol resin were investigated with cone calorimeter. The fire characteristics of unsaturated polyester, mostly being applied to the existing passenger train, and phenolic resin were compared. Thermal gravimetric analysis(TGA) was used to monitor the degree of thermal decomposition for the phenolic resin. According to the cone calorimeter data, the time to ignition, heat release rate and CO yield was faster and higher as the external heat flux increase. Under the same heat flux, the time to ignition of sandwich type phenolic resin was shorter than that of fiber reinforced. The result of comparison between unsaturated polyester and phenolic resin was that phenolic resin was shown to have better fire resistance than that of unsaturated polyester.

• Proceedings of the KSR Conference
• /
• 2000.11a
• /
• pp.157-164
• /
• 2000

This study is about predicting the interior pressure level of the korean high speed train using ray acoustic method. The motor car and the motor and passenger cabin are investigated under the environment of passing open countryside and inside tunnel of 350 km/hr. Calculated sound levels are compared with the proposed sound levels and suggestions about the transmission Joss values of isolating panels inside motor car and the guide lines of allowed sound power limit of motor equipments are provided. Results of TPI car show calculated interior sound level is below the proposed values for both cases of open countryside running and inside tunnel. Since ray acoustic method calculated only air borne noise component, real sound level of the motor car may be higher than prediction. Passenger cabins of TMI, TM5 show higher sound level than the proposed values, so window method was carried out to find the contribution of each panel components and point out the remedy of transmission path. Reduction of sound power of motor equipments should be condisered at the same time.

• Proceedings of the KSR Conference
• /
• 1998.05a
• /
• pp.241-248
• /
• 1998

A Systematic approach to estimate an interior noise level for a railway passenger car has been proposed. The prediction is based on the sound power values obtained from measured sound pressure lever, when a high speed train runs at 300km/hr. Then, the exterior sound pressure value is calculated by using the BEM code. After that, an interior sound lever is estimated, considering the transmission loss of body structures and absorption effect inside of the train. In this application, the estimated noise level is between 66 dBA and 74 dBA. The proposed approach could be useful for rough estimation of a noise level inside a passenger car at the design stage, a]though the method has some limitation to be implement for a general situation.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.23 no.11
• /
• pp.1020-1026
• /
• 2013

An accurate railway environmental noise prediction model is required to make the proper solution of the railway noise problems. In this paper, an engineering model for predicting the noise of conventional passenger cars is presented considering the acoustic source strength in octave-band frequencies and the propagation over grounds with varying surface properties. Since the formation of a train can be variable, the source strength of each locomotive and passenger car was estimated by measuring the pass-by noise and analysing the wheel-rail rolling noise. Some validation cases show on the average small differences between the predictions of the present model and the measurement results.

• Proceedings of the KSR Conference
• /
• 2005.11a
• /
• pp.1153-1158
• /
• 2005

The passenger cabin of train is generally insulated from exterior environment to ensure the safety of passengers and to enhance the heating and cooling efficiency. Therefore, the IAQ management of passenger cabin is very important in aspect of amenity and health of passengers. In this study, we measured some IAQ factors influencing on the indoor air quality of passenger cabin. The measurement was carried out to investigate the PM-10, PM-2.5, PM-1.0, temperature, relative humidity, carbon monoxide, carbon dioxide leves of KTX. The results showed that the air quality of the cabin was largely satisfactory, but carbon dioxide level was relatively higher. The control of carbon dioxide levels need the extensive research in the future.

• International Journal of Railway
• /
• v.4 no.2
• /
• pp.29-33
• /
• 2011

High-speed rail study needs to focus on passenger movements as a key element of the planning process. A particular challenge is obtaining comprehensive information on high-speed rail passenger movements. A national preference stated survey was conducted from October to November of 2011 to meet this challenge through direct personal interviews of travelers between Seoul and Busan (the so called Kyung-Bu corridor). Over 40 interviewers were hired and trained to conduct personal interviews at several stations along locations within Kyung-Bu Seoul and Busan corridor. A total of 4,550 travelers were interviewed, furnishing an extensive database on high-speed rail passenger movements. The methodology and procedure employed to collect the national data for Korean high-speed train KTX are described. Specific issues investigated include survey design, questionnaire and strategy. Lessons learned from the high-speed rail passenger movement study provide insights for other countries contemplating similar high-speed rail studies.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.25 no.4
• /
• pp.266-274
• /
• 2015

Vibration exposure of domestic high speed trains(KTX and ITX-saemaeulho) to passenger traveling on the Gyung-Bu line was measured to evaluate health effect which is based on ISO 2631-1. The vibration exposure was compared with the frequency weighted root mean square(r.m.s.) and vibration dose value(VDV) of the two trains’ vibration. It is concluded that vibration exposure of the two train during round trip of Busan-Seoul in single day is evaluated to be safe for the passenger’s health according to the health guidance caution defined on ISO 2631-1. Futhermore KTX’s vibration exposure is found to be significantly lower than ITX-saemaeulho thanks to lower vibration magnitude as well as shorter trip time.

• Journal of the Korean Society of Safety
• /
• v.33 no.6
• /
• pp.85-92
• /
• 2018

This study aimed to reduce of traps incident of metro train door by suggesting preventive actions throughout analyzing why railway drivers and passengers commit unsafe behaviors which are human factors making occurrence of the incidents. The incident cases were analyzed and Incident Tree was structured by brainstorming with safety experts. In addition, the questionnaire survey was conducted for comparison with the analysis results. As the result, this study suggested driver's factors, passenger's factors, and public relation plan for safe use of metro in order to reduce the frequency of the incidents. For driver's factors, implementing job-rotation systems between railway and non-railway drivers, installing Object Detection Sensors between the metro doors and PSD, and flexible operation of dwell time were suggested. For passenger's factors, placing a platform safety person, installing a safety fence in front of the stairs and the elevators, and country wide public relations through mass media were suggested.

• Proceedings of the KSR Conference
• /
• 2006.05b
• /
• pp.1124-1127
• /
• 2006