• Transactions of the Korean Society of Automotive Engineers
• /
• v.10 no.1
• /
• pp.162-167
• /
• 2002

An automotive wheel bearing is one of the most important components to guarantee the service life of a passenger car. The endurance life of a bearing is affected by many parameters such as material properties, heat treatment, lubrication conditions, temperature, loading conditions, bearing geometry, internal clearance and so on. In this paper, we analyze the relation between loads and deformations of wheel bearing units. On the basis of it, we calculate the endurance life of wheel bearing units and suggest a method to determine the initial contact angle to achieve a maximum endurance life with considering stress concentration.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.713-720
• /
• 2009

The development goals of the next generation EMU are to improve the system maintainability, transportation capacity, reliability, passenger service and energy efficiency. In this paper, we propose a measurement scheme for the development goals of the next generation Electric Multiple Unit(EMU). To achieve that, we drew meaningful characteristics for each development goal, which mainly affect effectiveness and performance of vehicle system. Finally, the measurement scheme for the development is obtained by using the characteristics, which could be a numerical values such as maximum velocity, acceleration of the vehicle and so on or subjective values such as a results of surveys from passengers and so on. We expect the proposed measurement scheme will be used to measure the development goals of other similar system as well as the next generation EMU.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.7
• /
• pp.2534-2540
• /
• 2010

In this paper we propose contents and results on installation and commissioning test for ATP on-board unit, which has propelled as one of the research projects, so called, "Reliability assessment and operation technology development for Korean-type tilting trains" in order to ensure the safety and operation efficiency of tilting trains. In KRRI, we have developed tilting trains for the speed-up of existing lines and for the passenger service improvement where the KTX is not available. And we also make progress the operation trial test at the speed of 10km with the use of ATS units, used in existing lines, for the purpose of the reliability assessment of the developed tilting trains. In MLTM, they have decided to accelerate the speed at more than 200km/h for the 7 existing lines including Jungang-line and Chungbuk-line where KTX has not operated. According to this decision, Train control system is to be changed from ATS to ATP. We should install an ATP on-board unit in tilting trains and verify the operational suitability. Therefore, we have installed and tested the same ATP on-board unit on tilting trains that used in the ATP construction project on Gyeongbu-line and Honam-line.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.10
• /
• pp.3911-3916
• /
• 2010

In this paper we describe contents and results on running test for ATP on-board equipment, which has propelled as one of the research projects, so called, "Reliability assessment and operation technology development for Korean-type tilting trains" in order to ensure the safety and operation efficiency of tilting trains. We developed tilting trains for the speed-up of conventional lines and for the passenger service improvement where the KTX is not available. And we made progress the operation trial test in the 120,000 km distance with the use of ATS equipment, used in existing lines, for the purpose of the reliability assessment of the developed tilting trains. We decided to accelerate the speed for more than 200km/h with respect to the 6 existing lines including Jungang-line and Chungbuk-line where KTX has not operated. According to this decision, Train control system is to be changed from ATS to ATP. We should have installed an ATP on-board unit in tilting trains and verified the operational suitability, therefore we installed the same ATP on-board unit on tilting trains as that used in the ATP construction project on Gyeongbu-line and Honam-line, and verified that the function and performance of the installed ATP on-board unit conformed to the tilting trains operation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.6B
• /
• pp.474-482
• /
• 2012

Mobile Gateway(MG) is a wireless LAN device to provide internet services to a passenger on vehicles like a bus. For using internet services, MG connects the Road Side Unit AP(RSU AP) based on WLAN .To provide a stable communication service on the moving vehicle, handoff changing MG's RSU must be handled fast and stably. However, it has a physical limits to remove a disconnection time of handoff process by reason of its technological features. In this paper, we suggest a MIMG(Multi-Interface Mobile Gateway) executing seamless handoff by using multiple wireless LAN interfaces for connecting RSU. In the detailed way to do stable handoff, we suggest the "Link Sharing Technique" to disconnection time of packet transmission for RSU to MIMG and the "Path Sharing Technique" to remove disconnection time of packet transmission for MIMG to RSU. we implemented the MIMG which performs the suggested handoff technique. We confirmed the superiority of our system by remove of the disconnection time(0 ms), and improved over 50 % of the communication bandwidth.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.3
• /
• pp.493-500
• /
• 2017

Based on the data accumulated through EMU fault management, this paper examines the reliability of old railway car parts and proposes measurements to improve safety. Subway Line 7 of the Seoul Metropolitan Rapid Transit Corporation, auxiliary power unit (Static Inverter) of the EMU second version is a core equipment to supply power to various room-service units in cars and make an effect directly on passenger satisfaction. To analyze the pattern of failure throughout the field data over a long period of time, this analysis of statistics and reliability considers the operating environment and stress factors. This statistical analysis presents the correlation between failure and the temperature stress factors related to frequent failure occurring intensively in summer. In addition, throughout the analysis of the life of the IGBT inverter, the effect of the temperature stress factor was observed before and after the repair. As a result of an analysis of the optimal operating conditions considering two variations of EMU, such as variable load and outside temperature, a difference in the cooling capacity between the optimal operating conditions and frequent failure conditions was observed. Based on this analysis, this paper suggests a way to minimize cooling capacity difference for the optimal operational conditions.

• Journal of Environmental Policy
• /
• v.8 no.1
• /
• pp.97-127
• /
• 2009

In Germany, North Sea and East Sea possess significant meaning in many aspects. North coast has an important economical significance to North Sea Gulf States. There are a number of harbors and manufacturing facilities in this area. Agriculture is also developed. East sea, where sea water and river water mingle. has a problem that it can not control harmful substances as fast as the North Sea due to its geographical location of being connected with the North Sea as a narrow water. To protect from big and small ship accidents and pollution sources, East Sea and North Sea have enacted HELKOM Convention and OSPAR Convention, respectively. Moreover, Denmark and Germany have made cooperation on tugboats in the occurrence of shipment accidents through the LethGer-Plan and DenGer-Plan. In 1998, after the Pallas accident that occurred near Bremen, the need to improve cooperation among each states on usable resources for ocean security has been increased in Germany. Consequently, the federal government and gulf state governments associated and organized the so called, "Havarie-Kommanando Ship Accident Measure Unit". Haravarie-Kommanando is a federal-state associated organization that deals with affairs that controls national operation and mobilization of ship accident related organizations unitively when serious ship accidents occur. Moreover, federal and state participant organizations, each shipping agencies and Wiking-Helicopers-Services, a helicopter agency, are cooperating well. Also, mutual assistance with the most prominent passenger agency called Scandlines, ARGE Kuestenschutz(Germany-Denmark shipping agency) is making progress as well.