• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2006년도 정기 학술대회 논문집
• /
• pp.749-756
• /
• 2006

Because of the orthotropic elastic properties and significant two-way bending action, orthotropic plate theory may be suitable for describing the behavior of concrete filled grid bridge decks. Current AASHTO LRFD Bridge Design Specification(2004) has live load moment equations considering flexural rigidity ratio between longitudinal and transverse direction, but the Korea highway bridge design specification(2005) doesn't. The Korea highway bridge standard specification LRFD(1996) considers an orthotropic plate model with a single load to estimate live load moments in concrete filled grid bridge decks, which may not be conservative. This paper presents live load moment equations for truck and passenger car, based on orthotropic plate theory. The equations of truck model use multiple presence factor, impact factor, design truck and design tandem of the Korea highway bridge standard specification LRFD(1996). The estimated moments are verified through finite-element analyses.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2000년도 추계학술대회 논문집
• /
• pp.514-520
• /
• 2000

Numerical simulation is conducted to clarify the heat transfer and fluid flow characteristics of HVAC(Heating, Ventilating and Air-Conditioning) for Mugunghwa passenger car. The HVAC system is installed under the floor of carbody. This new HVAC system has a lot of merits in respect of the center of gravity of carbody, flow induced noise and reduction of condensation water etc. The standard k-epsilon turbulent model and SIMPLEC algorithm based on finite volume method are used to solve the physical HVAC model. To assure convergence, QUICK scheme for momentum equation and the first order upwind scheme for turbulent equations are used. From the results of simulation, the temperature and velocity magnitude are also distributed uniformly in the interior of car.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.1475-1480
• /
• 2007

Numerical analysis has been conducted to simulate pedestrian flow in the model of two-storied subway station. Because almost all the subway stations are two or three storied structure, simulations are conducted for the passengers those who get off the train and pass the wicket. Passenger flow analysis is very important factor to design the station and also to manage the operation of subway system. In the subway station, pedestrians move to the horizontal directions as well as vertical ones. Therefore, to consider the movement of pedestrians is necessary for the guarantee of safety and conveniency. As the up and down floors are connected with step, escalator and elevator, the entire movements in the multi-storied station should be simulated as like a 3-dimensional flow. Numerical schemes for the directional sweeping are developed to prevent the dependency on physical structure of station and to determine primary direction and secondary one. By using the developed program, we compared the simulation results of the effects of the location and size of exit and elapsed time.

• 한국가시화정보학회지
• /
• 제8권1호
• /
• pp.25-30
• /
• 2010

The flow characteristics under recirculation cool vent mode is numerically studied using commercial fluid dynamic code(CFX). For the reliable analysis, real vehicle and human FE model is employed in grid generation process. The geometrical location and shape of panel vent, and exhaust vent is set as that of real vehicle model. The flowrate of the working fluid is determined as 330CMH which is equivalent to 70 percent of maximum capacity of HVAC system. The high velocity regions are formed around 4 each panel vent. Because of the non-symmetrically located exhaust, non-uniform flow and partial backflow near the door trim is observed. Streaklines start from each panel vent show the flow pattern of the airflow in the passenger's compartment very well.

• 한국소음진동공학회논문집
• /
• 제19권1호
• /
• pp.101-108
• /
• 2009

This paper presents dynamic analysis of HVAC(heating ventilation & air conditioning) heater case which consists of heater and evaporator unit for passenger car. To analyze the dynamic characteristics of HVAC heater case, finite element model which consists of shell elements is constructed for modal analysis and experimental modal analysis has been conducted. Finite element analysis results are compared with experimental results to evaluate of validity of finite element model. After identifying mode shape and natural frequency of HVAC heater case, local stiffness of HVAC case is evaluated through point mobility using finite element analysis and experiment.

• 한국자동차공학회논문집
• /
• 제3권6호
• /
• pp.69-77
• /
• 1995

This paper presents performance investigation of a continuously variable ER(Electro-Rheological) damper for passenger vehicles. A dynamic model of the damper is formulated by incorporating electric field-dependent Bingham properties of the ER fluid. The Bingham properties are experimentally obtained through Couette type electroviscous measurement with respect to two different particle concentrations. The governing equation of the hydraulic model treating three components of fluid resistances;electrode duct flow, check valve flow and piston gap flow, is achieved via the bond graph method. A prototype ER damper is then designed and manufactured on the basis of parameter analysis. The damping forces of the system are experimentally evaluated by changing the intensity of the electric field, the particle concentration and the electrode gap.

• 한국철도학회논문집
• /
• 제6권1호
• /
• pp.15-20
• /
• 2003

The computer simulation techniques were adopted to evaluate the effects of seating positions of passenger under various accident scenarios. The baseline of computer simulation model was tuned by the sled impact tests which conducted under the upright and standard seating positions. This study shows the effect of relative velocity between occupant and struck vehicle while occupant is impacted to a front seat's seatback. Although, base on the current accident scenarios, The KHST is performed well enough to protect average adult male occupants. However, Results from the tests indicate small size occupant or higher impact speed may cause sever neck and femur injuries.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제17권3호
• /
• pp.181-187
• /
• 2017

Purpose: The purpose of this study is to estimate the lifetime of commercial passenger vehicles shock absorber using degradation test and data. Method: The degradation factor of shock absorber was determined to be a damping force using FMEA. Degradation test was performed on damping force under real world usage condition and analysed the degradation data. Results: To estimate the lifetime of shock absorber, a degradation model was developed and a numerical example was provided. Conclusion: Evaluation of the lifetime of commercial and military vehicles shock absorber will be possible by using the proposed degradation analysis method.

• 대한교통학회:학술대회논문집
• /
• 대한교통학회 2002년도 제41회 학술발표회논문집
• /
• pp.45-77
• /
• 2002

교통혼잡 문제가 점점 심각해짐에 따라 대중교통의 중요성은 날로 부각되며, 대중교통을 지원하기 위한 정책들이 속속 입안되고 있어 대중교통을 심도 있게 분석할 수 있는 틀의 개발은 필연적이라 할 수 있다. 이에 본 연구는 대중교통 통행배정모형 개발과 대중교통 기종점통행량(OD) 추정을 목적으로 수행되었다. 대중교통 통행배정모형의 개발부분에서는 기존의 대중교통 통행배정모형이 개별차량과 다른 대중교통의 특성을 정확히 반영하고 있지 못하다는 한계를 극복하고자, 최적경로 탐색에는 유전자 알고리즘(Genetic Algorithm)을 통행량 배정에는 로짓모형을 기반으로 한 확률적 통행량 배정모형(Stochastic Network Loading Model)을 이용하여 TATSN 모형을 개발하였다. 그리고, 대중교통 기종점통행량의 추정은 전통적인 기종점통행량 추정 방법인 기종점조사 방법이 시간과 비용이 과대하게 소요된다는 단점을 인식하여 관측통행량을 이용하여 추정하는 방법을 제안하였다.

• 무역학회지
• /
• 제47권4호
• /
• pp.35-52
• /
• 2022

Air transport is at the core of global economic growth. There is a close relationship between the flow of regional elements and the growth of the regional economy. It is easy to misestimate the impact of airports on the regional economy without considering spatial spillover effects. This study attempted to establish an asymmetric economic geographical weight matrix by applying the Spatial Durbin Model with cargo volume and passenger numbers as indicators. The influence of spillover effects on the regional economy, including direct spillover effects and indirect spillover effects are studied. The results revealed that passenger numbers and cargo volume have significant positive spillover effects on the regional economy. The driving effect of the airport on the regional economy was considered from a wider space scope. This study contributes to the scientific evaluation of the aviation economy.