• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.1078-1083
• /
• 2000

A high speed rotor balancing machine was developed, which is capable of balancing a flexible rotor in high speed. The machine is largely consisted of vacuum chamber, oil supply system and vacuum pump system. And, in order to investigate performances of the machine, various tests were carried. After high speed rotor balancing of gas turbine engine rotor using influence coefficient method, the flexible engine rotor passed smoothly through its critical speed.

• 한국전기전자재료학회논문지
• /
• 제20권9호
• /
• pp.787-792
• /
• 2007

To understand the effects of forest fires on polymer insulators for transmission lines, the forest fire simulation tests were performed with polymer and porcelain insulators at Gochang testing center. These tests consisted of energizing 90 kV at line-to-ground voltage of 154 kV lines and open flame rising up to $600-630^{\circ}C$ as being measured at insulator surface. Mechanical and electrical characteristics such as specific mechanical load, leakage current, low frequency dry flashover voltage and impulse flashover voltage were analyzed for the polymer insulators before, during and after simulation tests compared with porcelain insulators. At the end of fire simulation tests, there was no detrimental deterioration of any insulators. All insulators passed the criteria of KEPCO specification. This study showed that forest fire simulation had no impact on polymer insulators.

• 신재생에너지
• /
• 제4권3호
• /
• pp.45-50
• /
• 2008

GFRP based composite rotor blades were developed for 750 kW & 2 MW wind turbines. The blade sectional geometry was designed to have a general shell-spar and shear web structure. For verifying the structural safety under all relevant extreme loads specified in the GL guidelines, the structural analysis of the rotor blades was performed using commercial FEM codes. The static load carrying capacity, blade tip deflections and natural frequencies were evaluated to satisfy the strength and stability requirements. Full-scale proof tests of rotor blades were carried out with optical fiber sensors for real-time condition monitoring. Finally, the prototype of each rotor blade passed all proof tests for GL certification.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 추계학술대회 논문집
• /
• pp.299-302
• /
• 2008

GFRP based composite rotor blades were developed for 750kW & 2MW wind turbines. The blade sectional geometry was designed to have a general shell-spar and shear web structure. For verifying the structural safety under all relevant extreme loads specified in the GL guidelines, the structural analysis of the rotor blades was performed using commercial FEM codes. The static load carrying capacity, blade tip deflections and natural frequencies were evaluated to satisfy the strength and stability requirements. Full-scale proof tests of rotor blades were carried out with optical fiber sensors for real-time condition monitoring. Finally, the prototype of each rotor blade passed all proof tests for GL certification.

• Bulletin of the Korean Chemical Society
• /
• 제33권12호
• /
• pp.4137-4140
• /
• 2012

A novel bioabsorbable suture material, poly(glycolide-caprolactone) (PGLCL) monofilament, was prepared by spinning of the PGLCL copolymer. The physical properties, strength retention, biocompatibility, and organism resolvability of the PGLCL monofilament were investigated. The results showed that the knot pull strength of the monofilament was higher than that stated in European Pharmacopoeia. The in vivo retention strength following implantation was 64%, 23%, 7%, and 0% after one, two, three, and four weeks, respectively. Mortality, clinical signs, validation, and sterility tests indicated that all items had passed. Organism resolvability tests showed that the PGLCL monofilament, as a suture, was absorbed within 91 days.

• Nuclear Engineering and Technology
• /
• 제56권2호
• /
• pp.375-388
• /
• 2024

In this study, to evaluate the shock and vibration load characteristics of used fuel, a sea transportation test was conducted using simulated fuel assemblies under normal transport conditions. An overall test data analysis was performed based on the measured strain and acceleration data obtained from cruise, rotation, acceleration, braking, depth of water, and rolling tests. In addition, shock response spectrum and power spectral densities were obtained for each test case. Amplification and attenuation characteristics were investigated based on the load path. The load was amplified as it passed from the overpack to the simulated used fuel-assembly. As a result of the RMS trend analysis, the fuel-loading position of the transportation package affected the measured strain in the fuel rod, and the maximum strains were obtained at the spans with large spacing. However, even these maximum strains were very small compared to the fatigue strength and the cladding yield strength. Moreover, the fuel rods located on the side exhibited a larger strain value than those at the center.

• 한국구조물진단유지관리공학회 논문집
• /
• 제23권2호
• /
• pp.1-9
• /
• 2019

대표적인 콘크리트 혼화재료 중 하나인 고로슬래그 미분말을 혼입한 콘크리트는 잠재수경성에 의해 콘크리트의 장기 내구성능 및 역학적 성능이 향상된다. 본 연구에서는 3 가지 수준의 물-결합재 비(0.37, 0.42, 0.47) 및 고로슬래그 미분말 혼입률(0 %, 30 %, 50 %)을 고려하여 염해에 대한 내구성능 평가를 수행하였으며, 염화물 확산 거동(촉진 염화물 확산계수, 통과 전하량)을 예측하는 식을 도출하고 촉진 염화물 확산계수와 통과 전하량간의 상관관계를 평가하였다. 2년 양생조건 시 고로슬래그 미분말 혼입 콘크리트에서 OPC 콘크리트 대비 촉진 염화물 확산계수 평가 결과에서는 최대 28 %의 감소율을 통과 전하량 평가에서는 최대 29 %의 감소율을 나타냈다. 또한 물-결합재 비의 증감에 의한 영향을 OPC 콘크리트 보다 GGBFS 미분말 혼입 콘크리트에서 더 적게 받는 것으로 판단된다. 배합 특성 및 실험 결과를 바탕으로 촉진 염화물 확산계수 및 통과 전하량을 예측하는 식을 다중회귀분석을 통해 도출한 결과, 통과 전하량 예측식이 확산계수 예측식보다 높은 결정계수를 나타냈다.

• 한국관광식음료학회지:관광식음료경영연구
• /
• 제15권2호
• /
• pp.57-72
• /
• 2004

This study is carried out to investigate the effect of any periods in the freezer and the product of value, moisture content, baking loss, specific volume loaf in manufncturing process thereof. The moisture content of the croissant slightly decreased as the periods passed in the freezer. And as passed periods frozen croissant dough dried naturally by the freezer fan. 1. As frozen periods passed croissant dough decreased moisture content and loaf volume. The volume is relation to the molsture content and croissant dough' gluten. Yeast is active but croissant dough is dried so pastry margarine's moisture vaporized little by little. 2. 1 day frozen bench time provided maximum specific loaf volume while croissant shape was unsettled, moisture content was highest. At the same dough croissant hardness had very sofi crust. 3. 1week and 2weets frozen dough had specific loaf volume and hardness with proper crust color. As the proper bench time provided best shape of croissant, color. 4. 4weeks and 8weeks frozen dough had over-al] value of croissant accelerating older product. As the same result, over Sweets frozen periods product were not available for sale and serving to customers. 5. By the sensory evaluation tests, over-all croissant as 1 week, 2weeks were significantly higher quality those than 6. 1day, 4weeks and 8weeks. Textural properties of croissant over 4weeks frozen periods so hard for every panel. According to the study, not croissant dough but also any other frozen dough(ex.Danish, brioche etc.)have to need proper bench time and 1week or 2weeks circulation making method have to given encouragement to practical pastry industry. Add to this study using only for frozen dough yeast instead of using fresh and instant

• 한국안전학회지
• /
• 제27권3호
• /
• pp.15-19
• /
• 2012

The fatigue behavior of AM60 magnesium alloy produced by equal channel angular pressing(ECAP) process was investigated through fatigue lifetime and fatigue crack propagation rate tests. The grain structure of the material was refined from 19.2 ${\mu}m$ to 2.3 ${\mu}m$ after 6 passes of ECAP at 493 K. The yield strength(YS) and ultimate tensile strength (UTS) increase after two passes but decrease with further pressing, although the grain size becomes finer with increasing pass number. The softening effect due to texture anisotropy overwhelmed the strengthening effect due to grain refinement after 2 passes. A large enhancement in fatigue strength was achieved after two ECAP passes. The current finding suggests that two passed material is better than the multi-passed material in view of the static strength and fatigue performance.

• 전자공학회논문지SC
• /
• 제47권3호
• /
• pp.19-27
• /
• 2010

KSLV-I은 100kg급 소형 인공위성을 지구 저궤도에 진입시키는 임무를 수행하여야 하며, 이를 위해 상단의 3축 자세제어를 위한 자세제어 시스템이 요구된다. 추력기 노즐을 통해 질소가스를 방출함으로써 발생하는 작용 반작용 모멘트를 제어모멘트로 사용하는 냉가스 추력기 자세제어 시스템을 KSLV-I 상단의 3축 자세제어 시스템으로 선정하였다. 본 논문에서는 KSLV-IRCS 추력기의 설계 및 기능시험, 성능시험, 환경시험에 대한 내용을 다룬다.