• 한국유체기계학회 논문집
• /
• 제9권1호
• /
• pp.25-31
• /
• 2006

The present study investigates the effects of bleed flow on heat/mass transfer and pressure drop in a rotating channel with transverse rib turbulators. The hydraulic diameter $(D_h)$ of the square channel is 40.0mm. The bleed holes are located between the rib turbulators on leading surface and the hole diameter (d) is 4.5 mm. The square rib turbulators are installed on both leading and trailing surfaces. The rib-to-rib pitch is 10.0 times of the rib height(e) and the rib height-to-hydraulic diameter ratio $(e/D_h)$ is 0.055. The tests were conducted at various rotation numbers (0, 0.2, 0.4), while the Reynolds number and the rate of bleed flow to main flow (BR) were fixed at 10,000 and $10\%$, respectively. The results suggest that the heat/mass transfer characteristics in the internal cooling passage are influenced by rib turbulators, bleed flow and the Coriolis force induced by rotation. For the rotating ribbed passage with bleed flow, the heat/mass transfer on the leading surface is hardly affected by bleed flow, but that on the trailing surface decreases due to the diminution of main flow. The results also show that the friction factor decreases with the bleed flow.

• The Korean Journal of Physiology and Pharmacology
• /
• 제10권6호
• /
• pp.349-354
• /
• 2006

The aromatic hydrocarbon receptor (AhR) is a ligand-activated transcription factor that mediates many of the biological and toxicological effects of 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD, dioxin) and related chemicals. The application of recombinant reporter plasmid such as the firefly luciferase gene has proven to be a very effective method to detect these chemicals. The bioassay system, CALUX, is sensitive in directly detecting AhR-agonists from a variety of environmental and biologic materials. However, responses of the AhR-dependent bioassays are dependent on the cell types used. Thus, we developed a sensitive bioassay using the recombinant mouse hepatoma cell (Hepa1c1c7) for the determination of dioxins. The recombinant cell line was stably transfected with firefly luciferase reporter gene (pGudLuc1.1). The transfected cells showed the highest induction of luciferase activity at 4.5 hr and a decrease beyond this time point. The system showed the highest sensitivity of detection ever reported. Upon TCDD exposure cells showed 2 fold increase at 10 pM and 7 fold increase at 100 pM, respectively. The passage number after the transfection played an important role in the sensitivity. The increase of passage number tended to increase the sensitivity of the cells up to 15. The media without phenol red showed a higher induction rate than with phenol red, suggesting the preferable use of phenol red-free media for the bioassay. Since each of the assays has unique characteristics that make them suitable for some screening applications and not others, development of sensitive bioanalytical methods based on a variety of cellular systems in a key to the successful determination of dioxins. The bioassay system developed in this study will contribute to further development of successful screening the AhR agonists among the environmental mixture. In addition, the rapid and sensitive nature of this cellular system can be applied as a valuable tool to screen the dioxin-like moieties among the prodrugs at the initial stage, thereby expediting the new drug discovery.

• Nuclear Engineering and Technology
• /
• 제27권4호
• /
• pp.503-517
• /
• 1995

강제대류 천이비등 열유속을 보다 실제 적으로 예측하기 위한 역학적 모델을 개발하였다. 이 모델은 가열된 벽면 근처를 어떤 기포기둥(Vapor Blanket)이 통과할 때 일어나는 다단계 비등과정 즉, 임계 기포기둥의 형성, 기포기둥밑의 미소액막(Macrolayer)의 기화 및 고갈, 그리고 얇은 기체막에서 일어나는 불안정한 막비등과정에 기초하였다. 핵비등이탈점 (DNB )과 막비등이탈점 (DFB)사이의 천이비등 곡선상의 열유속은 임계 기포기둥이 주어진 벽면을 통과할 동안 상기한 각 비등과정의 지속 시간비(Time Fraction)를 각 비등열유속에 곱한 후 그것을 합하여 정량화하였다. 이 모델의 예측치를 현재까지 발표된 문헌들에 나타난 실험치와 비교한 결과, 본 모델은 저건도 및 10 bar 근처의 고압조건의 실험치를 잘예측하는 것으로 나타났다.

• Animal Bioscience
• /
• 제36권12호
• /
• pp.1889-1897
• /
• 2023

Objective: 'Cultured meat' has been suggested as means of solving the problems associated with overpopulation and gas emissions. Satellite cells are a major component in the production of cultured meat; however, these cells cannot be maintained in vitro over long periods. Fibronectin is a glycoprotein that affects biological processes such as cell adhesion, differentiation, and migration. Unfortunately, the characteristics of porcine satellite cells grown in a long-term culture when exposed to fibronectin-coated dishes are unknown. The objective of this study was to investigate the appropriate concentration of fibronectin coated dishes for proliferation and maintenance of porcine satellite cells at long-term culture. Methods: In this study, we isolated the satellite cells and fibroblast cells with pre-plating method. We next analyzed the cell doubling time, cell cycle, and rate of expressed paired box 7 (Pax7) and myogenic differentiation 1 (MyoD1) in porcine satellite cells cultured with 20 ㎍/mL of fibronectin-, gelatin-, and non-coated dishes at early and late passage. We then analyzed the proliferation of porcine satellite cells with various concentrations of mixed gelatin/fibronectin. We next determined the optimal concentration of fibronectin that would encourage proliferation and maintenance of porcine satellite cells in a long-term culture. Results: Doubling time was lowest when 20 ㎍/mL of fibronectin was used (as tested during an early and late passage). Levels of expressed Pax7 and MyoD1, assessed using immunocytochemistry, were highest in cells grown using fibronectin-coated dishes. The proliferation of gelatin/fibronectin mixed coatings had no significant effect on porcine satellite cells. The concentration of 5 ㎍/mL fibronectin coated dishes showed the lowest doubling time and maintained expression of Pax7. Conclusion: Fibronectin with 5㎍/mL effectively maintains porcine satellite cells, a discovery that will be of interest to those developing the next generation of artificial meats.

• 한국철도학회논문집
• /
• 제12권1호
• /
• pp.9-15
• /
• 2009

본 연구는 축소실험을 통하여 터널내 화재발생시 구난역 내 설계된 환기 시스템 성능을 검증 하였다. Froude 수 상사법칙을 적용하여 실제 터널 크기의 1/35로 축소된 모형터널을 사용하였다. 모형터널은 두께가 2mm인 철을 사용하여 총 길이 10m, 높이 0.19m, 폭 0.26m으로 제작되었다. Cross-passage는 사고터널과 구난 터널 사이에 연결되고 Cross-passage 중앙에는 방화문이 설치되어 있다. 실험에는 n-heptane, $4cm{\times}4cm$ 풀화재를 이용하였다. 화원의 발열량은 695.97W이고, 화원 위치는 터널 중앙과 가장 위험한 경우로써 터널 입구지점에 각각 설치하였다. 환기조건은 0.015cms이고 화원과 가장 인접한 곳에서만 배기하도록 하였다. 구난역 배기 성능을 검증하기 위해 온도와 CO농도를 측정하여 연기의 유무를 파악하였다. 본 실험의 결과는 다음과 같다. 첫째, 터널 중앙화원인 경우 환기가 없어도 구난 터널에 연기가 검출되지 않았다. 둘째, 구난역 입구 부근에 화원을 설치한 경우 환기 조건을 주지 않으면 연기가 구난 터널로 침투하지만, 설계된 배기 조건시 연기는 구난터널로 전파하지 않았다.

• 한국자동차공학회논문집
• /
• 제22권2호
• /
• pp.91-99
• /
• 2014

The common-rail injectors are the most critical component of the CRDI diesel engines that dominantly affect engine performances through high pressure injection with exact control. Thus, from now on the advanced combustion technologies for common-rail diesel injection engine require high performance fuel injectors. Accordingly, the previous studies on the numerical and experimental analysis of the diesel injector have focused on a optimum geometry to induce proper injection rate. In this study, computational predictions of performance of the diesel injector have been performed to evaluate internal flow characteristics for various needle lift and the spray pattern at the nozzle exit. To our knowledge, three-dimensional computational fluid dynamics (CFD) model of the internal flow passage of an entire injector duct including injection and return routes has never been studied. In this study, major design parameters concerning internal routes in the injector are optimized by using a CFD analysis and Response Surface Method (RSM). The computational prediction of the internal flow characteristics of the common-rail diesel injector was carried out by using STAR-CCM+7.06 code. In this work, computations were carried out under the assumption that the internal flow passage is a steady-state condition at the maximum needle lift. The design parameters are optimized by using the L16 orthogonal array and polynomial regression, local-approximation characteristics of RSM. Meanwhile, the optimum values are confirmed to be valid in 95% confidence and 5% significance level through analysis of variance (ANOVA). In addition, optimal design and prototype design were confirmed by calculating the injection quantities, resulting in the improvement of the injection performance by more than 54%.

• Clinical and Experimental Reproductive Medicine
• /
• 제36권4호
• /
• pp.311-319
• /
• 2009

목 적: 인간 배아줄기세포 (human embryonic stem cells; hESCs)는 미분화 상태로 무한 증식할 수 있는 자가 증식(self-renewal) 능력과 인체의 모든 세포로 분화할 수 있는 전분화능 (pluripotency)의 특징을 가진 세포로, 손상된 세포를 건강한 세포로 대체하고자 하는 세포치료 (cell therapy) 연구에 활용하기 위한 세포 공급원 (cell source)으로 제시되고 있다. 그러나 인간 배아줄기세포는 확립된 초기에 세포를 안정적으로 배양하고 유지하는 과정이 쉽지 않으며, 특히 동결보존되어 있던 세포를 해동한 후 배양할 때 자연 발생적 분화가 높기 때문에 세포주의 유지에 많은 어려움이 따른다. 본 연구에서는 동결보존되어 있던 초기 계대의 인간 배아줄기세포를 해동하여 다시 배양할 때 자연 발생적 분화 부분을 기계적 분리 방법으로 제거하여 미분화 상태의 세포를 보다 빠르게 확보하기 위한 효율적인 방법에 대해 알아보고자 하였다. 연구방법: 인간 배아줄기세포를 계대 배양한지 4일이 되는 날, 50% 이상의 자연 발생적 분화가 나타난 세포군에서 분화된 부분만을 절개용 유리 피펫 (drawn-out dissecting pasture pipette)을 사용하여 기계적인 방법으로 제거하였다. 이후 지속적으로 배양액을 교환해 주며 세포군의 제거된 부분을 7일째 되는 날까지 관찰하였다. 결 과: 기계적 분리 방법을 사용하여 인간 배아줄기세포의 자연 발생적인 분화 부분을 제거한 빈 공간에 미분화상태의 인간 배아줄기세포가 분열하여 채워지는 것을 관찰하였다. 또한, 이 실험 방법을 연속 두 번 적용하여 배양했을 때 미분화 세포로 회복되는 세포군의 비율이 조금 더 높아지는 것을 확인할 수 있었다. 결 론: 동결되어 있던 초기 계대 인간 배아줄기세포의 해동 후, 자연 발생적 분화에 의해 미분화 상태를 유지하는 세포의 수가 적어 계대를 유지 하기가 어려울 때 이와 같은 기계적 분리 방법을 사용하여 자연 발생적 분화 부분을 제거한 후 배양을 지속하는 것이 단기간 내에 미분화 상태를 유지하는 인간 배아줄기세포의 양적 확보를 위한 효율적인 방법이라고 사료된다.

• Corrosion Science and Technology
• /
• 제6권3호
• /
• pp.103-111
• /
• 2007

The effect of stress factors on the growing process of stress corrosion cracking (SCC) of the sensitized 18-8 stainless steel in high temperature water was investigated using equations of crack growth rate derived from applying electric circuits to SCC corrosion paths. Three kinds of cross sections have to be considered when electric circuit is constructed using total current. The first is ion flow passage area, $S_{sol}$, of solution in crack, the second is total dissolving surface area, $S_{dis}$, of metal on electrode of crack tip and the third is dissolving cross section, $S_{met}$, of metal on grain boundary or in base metal or in welding metal. Stress may affect each area. $S_{sol}$ may depend on applied stress, $\sigma_{\infty}$, related with crack depth. $S_{dis}$ is expressed using a factor of $\varepsilon(K)$ and may depend on stress intensity factor, K only. SCC crack growth rate is ordinarily estimated using a variable of K only as stress factor. However it may be expected that SCC crack growth rate depends on both applied stress $\sigma_{\infty}$ and K or both crack depth and K from this consideration.$\varepsilon(K)$ is expressed as ${\varepsilon}(K)=h_2{\cdot}K^2+h_3{\cdot}K^3$ when $h_{2}$ and $h_{3}$ are coefficients. Also, relationships between SCC crack growth rate, da/dt and K were simulated and compared with the literature data of JBWR-VIP-04, NRC NUREG-0313 Rev.2 and SKIFS Draft. It was pointed out in CT test that the difference of distance between a point of application of force and the end of starter notch (starting point of fatigue crack) may be important to estimate SCC crack growth rate. An anode dissolution current density was quantitatively evaluated using a derived equation.

• International Journal of Fluid Machinery and Systems
• /
• 제7권2호
• /
• pp.42-53
• /
• 2014

Phase resonance in Francis type hydraulic turbine is studied. The phase resonance is a phenomenon that the pressure fluctuation in the penstock of hydraulic turbine installation can become very large when the pressure waves from each guide vane caused by the interaction with the runner vane reach the penstock with the same phase. Experimental and numerical studies have been carried out using a centrifugal fan. In the present study, comparisons between the pump mode and the turbine mode operations are made. The experimental and numerical results show that the rotational direction of the rotor does not affect characteristics of the pressure fluctuation but the propagation direction of the rotorstator interaction mode plays an important role. Flow rate fluctuations through the stator are examined numerically. It has been found that the blade passing flow rate fluctuation component can be evaluated by the difference of the fluctuating pressure at the inlet and the outlet of the stator. The amplitude of the blade passage component of the pressure fluctuation is greater at the stator inlet than the one at the stator outlet. The rotor-stator interaction mode component is almost identical at the inlet and the outlet of the stator. It was demonstrated that the pressure fluctuation in the volute and connecting pipe normalized by the flow rate fluctuation becomes the same for pump and turbine mode operations, and depends on the rotational direction on the interaction mode.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년 영문 학술대회
• /
• pp.775-780
• /
• 2008

This paper reports on the internal flow of a centrifugal mini pump working at the low flow rate operating conditions. The RNG $\kappa-\varepsilon$ turbulence model was employed to simulate the three-dimensional turbulent flow in the pump. To examine and certify the simulation results, a transparent acrylic centrifugal mini pump model which is suitable for PIV measurement has been developed. The tongue region and the passages region between blades were investigated using PIV. In order to eliminate the effect of refraction on the area closed to the wall and increase the measurement accuracy, the fluorescent particles were scatted into the working fluid with the tracing particles. It is found from the calculation and PIV measurement results that there is a large area of recirculation flow near the tongue at low flow rate operating conditions. The computationally predicted water head using the $\kappa-\varepsilon$ turbulence model at low flow rate operating conditions are in very good agreement with the experimentally measured water head and the mean velocity distributions at investigation area obtained by PIV and calculation showed a satisfactory agreement as well. Meanwhile, the results of PIV measurements show that the flow status in one passage is different to another. And for capturing the internal flow detail information, the $\kappa-\varepsilon$ turbulence model is not very suitable.