• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2000년도 유체기계 연구개발 발표회 논문집
• /
• pp.122-128
• /
• 2000

Aerodynamic optimization of an automotive air-conditioning blower is a hard task because of the highly complex flow phenomena related to three-dimensional flow separations and the unsteady nature caused by the interaction between primary and secondary air flows throughout the fan. In this paper, an aerodynamic study on a forward-curved centrifugal fan has been carried out Firstly we obtained the fan performance curves versus flow rates showing its unstable nature in the surging operation range. Secondly aerodynamic characterizations were carried out by investigating the velocity and pressure fields in the casing flow passage using a 5-hole pilot probe, at different operating conditions. Surface flow pattern near the cut-off area exhibits similar flow behavior above the best efficiency operating point, although the pressure level increases substantially with the Increase of flow rate. Vorticity in the casing passage flow occurs in all (low rates, downstream from the r-Z plane $\theta$=120 deg., where the position of its core changes with the circumferential location. Although complex, the general flow behavior were common, giving insight in its main aerodynamic features.

• 한국유체기계학회 논문집
• /
• 제18권5호
• /
• pp.5-12
• /
• 2015

This paper presents a numerical investigation of the effect of the dihedral stator on the loss in a transonic axial compressor. Four stator geometries with different stacking line variables are tested in the flow simulations over the whole operating range. It is found that a large shroud loss at the rotor outlet and the subsequent shroud corner separation in the stator passage occur at low mass flow rate. The hub dihedral stator and bowed blade generate unexpected hub-corner-separation, thereby causing a large total pressure loss over the entire operating range. However, the corresponding blockage forces the high momentum flow near the hub to divert toward the upper part of the passage suppressing the negative axial velocity region. The dihedral stator increases deflection angle and secondary vorticity near the endwall where the dihedral is applied. As a result, the endwall loss which is related to the endwall relative velocity decreases.

• Fisheries and Aquatic Sciences
• /
• 제18권1호
• /
• pp.81-88
• /
• 2015

We investigated factors affecting primary cultures of Pacific abalone Haliotis discus hannai ovary-dissociated cells to identify general aspects of their early-phase culture. Ninety-seven cell populations derived from 30 individuals were cultured in different media with varying compositions of medium supplements, and initial attachment, subculture, and survival for ${\geq}10$ weeks were assessed according to medium composition and individual. We also examined the time required for subculture and the rate of cell death according to both culturing period and passage number within 10 weeks. A lack of fetal bovine serum (FBS) and hemolymph significantly inhibited the growth of cultured cells, while we detected no significant effect of medium composition on initial cell attachment. Through data reallocation, with the omission of data from cell populations cultured in FBS-free and hemolymph-free media, we showed that growth inhibition was also affected by individual differences among the abalones used. During the culture, we observed four different types of cell morphology. Moreover, considerable time was required for subculture-18.4 and 19.5 days for first and second subcultures, respectively-and cell death did not occur within 30 days or for passage 0. Our results will provide valuable information for developing universal cell culturing guidelines in abalone species and suggest the feasibility of culturing abalone ovary-dissociated cells.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2005년도 연구개발 발표회 논문집
• /
• pp.178-184
• /
• 2005

The present study investigates the effects of bleed flow on heat/mass transfer and pressure drop in a rotating channel with transverse rib turbulators. The hydraulic diameter ($D_h$) of the square channel is 40.0 mm. The bleed holes are located between the rib turburators on leading surface and the hole diameter (d) is 4.5 mm. The square rib turbulators are installed on both leading and trailing surfaces. The rib-to-rib pitch is 10.0 times of the rib height (e) and the rib height-to-hydraulic diameter ratio ($e/D_h$) is 0.055. The tests were conducted at various rotation numbers (0, 0.2, 0.4), while the Reynolds number and the rate of bleed flow to main flow were fixed at 10,000 and 10%, respectively. The results suggest that the heat/mass transfer characteristics in the internal cooling passage are influenced by rib turbulators, bleed flow and the Cariolis force induced by rotation. For the rotating ribbed passage with bleed flow, the heat/mass transfer on the leading surface is hardly affected by bleed flow, but that on the trailing surface decreases due to the diminution of main flow. The results also show that the friction factor decreases with the bleed flow.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년 영문 학술대회
• /
• pp.202-212
• /
• 2008

A three-dimensional computation was conducted to understand effects of the low Reynolds number on the loss characteristics in a transonic axial compressor, Rotor67. As a gas turbine becomes smaller in size and it is operated at high altitude, the operating condition frequently lies at low Reynolds number. It is generally known that wall boundary layers are thickened and a large separation occurs on the blade surface in axial turbomachinery as the Reynolds number decreases. In this study, it was found that the large viscosity did not affect on the bow shock at the leading edge but significantly did on the location and the intensity of the passage shock. The passage shock moved upstream towards leading edge and its intensity decreased at the low Reynolds number. This change had large effects on the performance as well as the internal flows such as the pressure distribution on the blade surface, tip leakage flow and separation. The total pressure rise and the adiabatic efficiency decreased about 3% individually at the same normalized mass flow rate at the low Reynolds number. In order to analyze this performance drop caused by the low Reynolds number, the total pressure loss was scrutinized through major loss categories such as profile loss, tip leakage loss, endwall loss and shock loss.

• 해양환경안전학회지
• /
• 제13권4호
• /
• pp.1-7
• /
• 2007

본 연구는 최근 우리나라에 영향을 미친 태풍 우사기(USAGI)와 나리(NARI) 내습시 낙동강 진우도 해안쓰레기량을 조사하여 그의 양, 종류 및 구성 성분을 평가하고, 수치모형실험을 통한 태풍 내습 파랑분포와의 상관성을 비교하였다. 그 결과에 따르면, (1) 태풍 내습시 낙동강 하구 진우도 해안쓰레기는 $5,769/86kg/km^2/day$의 퇴적속도로 퇴적되는 것으로 산정되었다. 이는 평상시보다 약 14.42 배 많은 양이다. (2) 진우도 전면해역에서의 태풍 내습시 파고분포는 4.1-3.5m였으며, 진우도 전면해역이 도요등 전면해역보다 파고비가 약 1.0배에서 2.5배 상승하여, 파랑에너지의 집중도가 크고, 보다 많은 양의 부유물질(쓰레기)의 밀집이 예상된다.

• 한국동물생명공학회지
• /
• 제35권3호
• /
• pp.215-222
• /
• 2020

Mesenchymal stem cells (MSCs) have been widely used as donor cells for somatic cell nuclear transfer (SCNT) to increase the efficiency of embryo cloning. Since replicative senescence reduces the efficiency of embryo cloning in MSCs during in vitro expansion, transfection of telomerase reverse transcriptase (TERT) into MSCs has been used to suppress the replicative senescence. Here, TERT-transfected MSCs in comparison with early passage MSCs (eMSCs) and sham-transfected MSCs (sMSCs) were used to evaluate the effects of embryo cloning with SCNT in a porcine model. Cloned embryos from tMSC, eMSC, and sMSC groups were indistinguishable in their fusion rate, cleavage rate, total cell number, and gene expression levels of OCT4, SOX2 and NANOG during the blastocyst stage. The blastocyst formation rates of tMSC and sMSC groups were comparable but significantly lower than that of the eMSC group (p < 0.05). In contrast, tMSC and eMSC groups demonstrated significantly reduced apoptotic incidence (p < 0.05), and decreased BAX but increased BCL2 expression in the blastocyst stage compared to the sMSC group (p < 0.05). Therefore, MSCs transfected with telomerase reverse transcriptase do not affect the overall development of the cloned embryos in porcine SCNT, but enables to maintain embryo quality, similar to apoptotic events in SCNT embryos typically achieved by an early passage MSC. This finding offers a bioengineering strategy in improving the porcine cloned embryo quality.

• Asian-Australasian Journal of Animal Sciences
• /
• 제12권7호
• /
• pp.1040-1048
• /
• 1999

Four ruminally fistulated crossbred $(Sahiwal{\times}Holstein\;Friesan)$ adult (~6 yr.) cattle of about $318{\pm}16kg$ body weight were randomly assigned in an experiment based on $4{\times}4$ latin square design to study the effect of different level of barseem (Trifolium alexendrinum) supplementation to wheat straw based diet on intake, digestion, VFA production, eating behaviour and passage rate. Four dietary treatments were wheat straw ad lib. (I), supplementation to wheat either 15(II), 30(III) or 45(IV)% of berseem. Mean total volatile fatty acids (TVFA) concentration in rumen liquor was 58.45, 66.14, 77.92 and 78.64 mmol/l. TVFA concentration in rumen liquor increased significantly (p<0.01) with increased level of berseem supplementation upon 30% level of breseem. Two peaks of TVFA concentration was observed at 4 and 8 h post feeding. Brseem supplementation showed no significant effect on daily time spent for eating, ruminating or idling, chews per minute or number of rumination boli ingested per minute. Time spent for eating and ruminating one kg neutral detergent fibre (NDF) was significantly (p<0.05) less in breseem supplemented groups. Animals in groups I, II, III and IV consumed 26, 34, 47 and 57% of DM within 1st 4 h and 64, 70, 70 and 77% of total DM within 1st 8 h of offering. All the animals consumed more than 90% of their DMI within 12 h. Active period of rumination was observed 8h post feeding reached the peak at 16 h post feeding, then declined and animals spend considerable time idling in last 4 h of 24 h feeding cycle. Berseem supplementation showed no significant effect on eating and rumination time. It is concluded that berseem supplementation upon 30% increases the efficiency of chewing during eating and rumination, which results in increase intake and TVFA production and nutrient digestibility.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2008년도 춘계 학술논문 발표대회
• /
• pp.83-86
• /
• 2008

The concrete used most in construction materials. There is an overcrowded iron dimensions use of the concrete at time of the other concrete theory on the reinforcing rod back which did congestion and compares it with this, and there are more few dimensions of the aggregate than concrete, and quantity of aggregate passage is superior in mortar than concrete. If a volume rate of the aggregate writes mortar than concrete against this, therefore, unit amount increases, and quantity of paste increases and quantity of dry shrinkage than increase concrete. However, I let I regulate lay priest distribution of the aggregate, and the results rates increase and reduce unit amount and decrease quantity of dry shrinkage, and separation resistance and the gap passage characteristics are judged because it can be it in a substitute document of very superior concrete. I came to carry out the study that I watched to let I was useful a little more and do the improvement repair of a become building wall body, a basement pillar and repair reinforcement of the assistant in the reinforcing rod back, the old age when I made congestion here. I regulated lay priest distribution of the aggregate in the study and regulated substitution rate of the aggregate (40%, 50%, 60%) and divided W/C 30%, 40% standards and produced mortar and I compared quantity of air by this, slump, compression robbery and showed it this time.

• Asian-Australasian Journal of Animal Sciences
• /
• 제15권6호
• /
• pp.793-799
• /
• 2002

Four feeds, three concentrates (rice bran, soybean meal and flaked corn) and one forage (corn silage) were incubated in four ruminally fistulated Holstein steers over three one week periods in a 3${\times}$4 incomplete latin square design where steers served as blocks and feeds as treatment. The objectives of the study were to investigate in situ DM, N and P degradability characteristics of feeds in order to assess availability of these nutrients by ruminants. In each period, all feeds were incubated in quadruplets (corn silage in triplicates) in the rumen of each steer in a reverse order for 3, 6, 9, 12, 18, 24 and 48 h. The DM 'a' fraction was higher and lower (p<0.001) in corn silage and rice bran respectively. Although corn silage contained the lowest (p<0.01) DM 'b' fraction, flaked corn contained the highest. Rate of DM degradation of flaked corn and corn silage were half (p<0.05) of the rate of DM degradation of either rice bran or soybean meal. Potential or effective DM degradability (p<0.05 to 0.001) at various passage rates were the lowest for rice bran and the highest for soybean meal. Corn silage N 'a' and 'b' was the highest and lowest, respectively (p<0.01). N 'c' of corn silage and rice bran was higher (p<0.001) than other feeds. Potential N degradability was the lowest in flaked corn (p<0.05). P 'a' was high (p<0.01) for corn silage and rice bran. P 'b' fraction was very high (p<0.001) in soybean meal but was absent in corn silage. Availability of DM (p<0.01 or 0.001), N (p<0.001) and P (p<0.05) differed between feeds at various passage rates except P availability at k=0.02 per h (p>0.05). The results demonstrate that the availability of DM, N and P by ruminants depends on feed as well as categories of animal.