• Ocean Systems Engineering
• /
• v.3 no.2
• /
• pp.137-147
• /
• 2013

Moonpools are vertical wells in a floating body used onboard many types of vessels like cable-laying vessels and offshore support vessels. Moonpool gives passage to underwater activities for different types of ships as per their mission requirements. It is observed that inside a moonpool considerable relative motions may occur, depending on shape, depth of the moonpool and on the frequency range of the waves to which the ship is exposed. The vessel responses are entirely different in zero and non-zero Froude number. Former situation is paid attention in this study as the mission requirement of the platform is to be in the particular location for long period of operation. It is well known that there are two modes of responses depending on the shape of the moonpool viz., piston mode for square shape and sloshing mode for rectangular shapes with different aspect ratios of opening like 1:1.5 and 1:2 ratios. Circular shaped moonpool is also tested for measuring the responses. The vessel moored using heavy lines are modeled and tested in the wave basin. The moored lines are provided with pre-tension and the dynamic tensions on the lines are measured. The different modes of oscillations of water column are measured using wave gauge and the vessel response at a particular situation is determined. RAOs determined for various situations provide better insight to the designer. The experiments done in the wave basin may also be compared with a software package meant for handling moored floating bodies.

• Coupled systems mechanics
• /
• v.8 no.6
• /
• pp.523-535
• /
• 2019

Artificial Intelligence (AI) is anticipated to be the future of technology. Hence, AI has been applied in various fields over the years and its applications are expected to grow in number with the passage of time. There has been a growing need for accurate, direct, and quick prediction of geotechnical and foundation engineering models especially since the success of each project relies on numerous amounts of data. In this study, two applications of AI in the field of geotechnical and foundation engineering are presented - spatial interpolation of standard penetration test (SPT) data and prediction of consolidation of clay. SPT and soil profile data may be predicted and estimated at any location and depth at a site that has no available borehole test data using artificial intelligence techniques such as artificial neural networks (ANN) based on available geospatial information from nearby boreholes. ANN can also be used to accelerate the calculation of various theoretical methods such as the one-dimensional consolidation theory of clay with high efficiency by using lesser computation resources. The results of the study showed that ANN can be a valuable, powerful, and practical tool in providing various information that is needed in geotechnical and foundation design.

• YAKHAK HOEJI
• /
• v.41 no.2
• /
• pp.260-267
• /
• 1997

To establish prediabetes in vitro model concerning the etiology of IDDM(Insulin Dependent Diabetes Mellitus) in cellular level we have designed prediabetes in vitro models in pa ncreatic beta cells. HIT-T15, RINm5F and isolated rat islets were chosen as pancreatic beta cells, and streptozotocin (STZ) used as diabetogenic agent. Degree of beta cell destruction to establish prediabetic in vitro model was determined by cell proliferation and insulin release using thymidine uptake and radio immuno assay. When HIT-T15 and RINm5F cells were treated with STZ, the degree of cell deterioration was dependent upon the origin and passage number of beta cells, and in the case of isolated islets STZ showed the more sensitivity than above two beta cell lines. The concentration and exposure time of STZ treatment to establish prediabetes in vitro model in beta cell lines and isolated rat islets were 2 ~ 10mM, 30 min. and 1 ~ 5mM, 30 min., respectively.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03b
• /
• pp.163-167
• /
• 2008

In this study, the 1/35 reduced-scale model experiment were conducted to investigate designed ventilation effect on the smoke movement at rescue station fire in railway tunnel. A model tunnel with 2 mm thick, 10 m long, 0.19 m high and 0.26 m was made by using Froude number scaling law. The cross-passages installing escape door at the center were connected between incident tunnel and rescue tunnel. The n-heptane pool fires with heat release rate 698.97W were used as fire source. The fire source was located at the center and portal of incident tunnel as worst case. A operating ventilation system extracted smoke amount of 0.015 cms(cubic meters per second). The smoke temperature and CO gas concentration in cross-passage were measured to verify designed ventilation system. The result showed that, at center fire case without ventilation, smoke did not propagate to rescues station. In portal fire case, smoke spreaded to rescues station without ventilation. But smoke did not propagated to rescues station with designed ventilation.

• Journal of the Korean Applied Science and Technology
• /
• v.26 no.3
• /
• pp.341-349
• /
• 2009

Natural grape extraction was extracted from grape component using diethyl ether as a solvent, and we tested various pharmaceutical and chemical characteristics of this extract. Characteristic experiments to use natural grape extract tested antimicrobial experiment using microbe in pharmaceutical material, and tested dye experiment using fiber in chemical material. From the result of characteristics experiment, some conclusions are obtained as follow. From the result of characteristics experiment, it obtained about 7.5%-grape extraction ratio as semi-solid state, and after dried in freezing from grape extract of semi-solid state, it obtained about 10%-grape extraction ratio as solid state of dark purple color. From result of antimicrobial experiment of grape extract, number of staphylococcus aureus (KCMC-01) and aspergillus niger (KCMC-02) in microbe decreased more and more according to time passage. This phenomenon showed that grape extract influences to antimicrobial effect. From the result of dye experiment of grape extract, it appeared in direction of dark purple color after dyed to use cotton and silk with fiber to control in pH 7.5. Specially the result which confirmed dye of fiber with optical electron microscope(OEM), we could know that it appears darker silk than cotton.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.9
• /
• pp.1219-1227
• /
• 2000

Rumination behavior, in vivo digestibility of cell wall constituents, particle size reduction in the rumen, and retention time in the digestive tract of sheep were examined using rice and oat straw as roughage sources. The in sacco digestibility, rumen fermentation, and microbial population and internal adenosine 5-triphosphate (ATP) content were also determined under feeding conditions of high-roughage and high-concentrate diets. Chewing number and time in rumination behavior were higher with rice straw than with oat straw, while the in sacco and in vivo DMD of rice straw were consistently lower than those of oat straw. Rice straw also showed higher frequency of thinner and longer particles in the rumen contents and lower retention time in the whole digestive tract as compared to those of oat straw. Rice straw was more effective to maintain the ruminal pH than oat straw, being reflected in higher internal ATP content of large-type protozoa on the high- concentrate diet. Changes in the ruminal microflora by shifting from the low- to the high- concentrate diet were also different between rice and oat straw.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.484-489
• /
• 2003

The mass flow rate of gas flow through critical nozzle depends on the nozzle supply conditions and the cross-sectional area at the nozzle throat. In order that the critical nozzle can be operated at a wide range of supply conditions, the nozzle throat diameter should be controlled to change the flow passage area. This can be achieved by means of a variable critical nozzle. In the present study, both experimental and computational works are performed to develop variable critical nozzle. A cone-cylinder with a diameter of d is inserted into conventional critical nozzle. It can move both upstream and downstream, thereby changing the cross-sectional area of the nozzle throat. Computational work using the axisymmetric, compressible Navier-Stokes equations is carried out to simulate the variable critical nozzle flow. An experiment is performed to measure the mass flow rate through variable critical nozzle. The present computational results are in close agreement with measured ones. The boundary layer displacement and momentum thickness are given as a function of Reynolds number. An empirical equation is obtained to predict the discharge coefficient of variable critical nozzle.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2010.05a
• /
• pp.20.2-20.2
• /
• 2010

Recently inkjet printing technology has been developed in the areas of low cost fabrication in environmentally friendly manufacturing processes. Although inkjet printing requires the interdisciplinary researches including development of materials, manufacturing processes and printing equipment and peripherals, manufacturing a printhead is still core of inkjet technology. In this study, a piezoelectric driven DOD (drop on demand) inkjet printhead has been fabricated on three layers of the silicon wafer in MEMS Technology because of its chemical resistance to industrial inks, strong mechanical properties and dimensional accuracy to meet the drop volume uniformity in printed electronics and display industries. The flow passage, filter and nozzles are precisely etched on the layers of the silicon wafers and assembled through silicon fusion bonding without additional adhesives. The piezoelectric is screen-printed on the top the pressure chamber and the nozzle plate surface is treated with non-wetting coating for jetting fluids. Printheads with nozzle number of 16 to 256 have been developed to get the drop volume range from 5 pL to 80 pL in various industrial applications. Currently our printheads are successfully utilized to fabricating color-filters and PI alignment layers in LCD Flat Panel Display and legend marking for PCB in Samsung Electronics.

• Korean Institute of Interior Design Journal
• /
• v.25 no.4
• /
• pp.113-124
• /
• 2016

This research examines domestic and oversea's barrier-free design guidelines provided exclusively for children and their implementations in the common spaces of the outpatient clinics in two pediatric rehabilitation hospitals in Seoul. Based on literature review, a checklist was developed to compare various barrier-free design guidelines in consideration of children's accessibility in space. In addition, four spatial areas in the outpatient clinics of the two hospitals were investigated based on the checklist. As a result, the domestic and Japanese guidelines were aiming primarily to all user groups regardless of ages. Whereas in other oversea's guidelines, a number of barrier-free design standards exclusive for children were found in the facility items such as handrail, sink, urine, toilet, water fountain, chair, table, shelve, and so on, throughout the indoor waiting and sanitary spaces. Concerning implementations, most of the items in the indoor passage, waiting, and sanitary spaces of the two hospitals were not sufficiently facilitated enough to meet with the barrier-free design standards exclusive for children. As such, it is recommended to review and improve the current domestic barrier-free design guideline to accommodate various physical and spatial needs of children in all age groups and regardless of disability types, in the design of a pediatric rehabilitation hospital in the future.

• Korean journal of food and cookery science
• /
• v.23 no.2 s.98
• /
• pp.235-244
• /
• 2007

This study was performed to investigate Seoul undergraduate students' thoughts on funeral rites and sacrificial rituals as well as ritual foods. A total of 542 students offered answers that the importance of sacrificial rituals was connected to filial piety for the ancestor, the customs descended from the past, and the belief that descendents received fortunes. The students didn't know the funeral rites process, but acknowledged they needed to know funeral rites, and would perform their parents' sacrificial rituals. We also found that students whose hometowns were Gangwondo and Jejudo were familiar with sacrificial rituals foods as well as their preparation and cooking. Also, the older the students, the better they knew the funeral rites process, sacrificial rituals and ritual foods. There were great differences in sacrificial rituals according to parent and student religions. Buddhists knew the most about funeral rites and sacrificial rituals, followed by Roman Catholics and agnostics. Protestant Christians were not interested in sacrificial rituals. The funeral rites process and the handing down of sacrificial ritual foods had significant differences based on sibling number. The more brothers and sisters in a family, the more committed they were to performing their parents' sacrificial rituals and the higher their interest in sacrificial ritual foods.