• 대한기계학회논문집B
• /
• 제29권8호
• /
• pp.911-920
• /
• 2005

The present study investigates heat/mass transfer and flow characteristics in a ribbed rotating passage with turning region. The duct has an aspect ratio (W/H) of 0.5 and a hydraulic diameter ($D_h$) of 26.67 mm. Rib turbulators are attached in the parallel arrangement on the leading and trailing surfaces of the passage. The ribs have a rectangular cross section of 2 m (e) $\times$ 3 m (w) and an attack angle of $70^{\circ}$. The pitch-to-rib height ratio (p/e) is 7.5, and the rib height-to-hydraulic diameter ratio (e/$D_h$) is 0.075. The rotation number ranges from 0.0 to 0.20 while the Reynolds number is constant at 10,000. To verify the heat/mass transfer augmentation, internal flow structures are calculated for the same conditions using a commercial code FLUENT 6.1. The results show that a pair of vortex cells are generated due to the symmetric geometry of the rib arrangement, and heat/mass transfer is augmented up to $Sh/Sh_0=2.9$ averagely, which is higher than that of the cross-ribbed case presented in the previous study for the stationary case. With the passage rotation, the main flow in the first-pass deflects toward the trailing surface and the heat transfer is enhanced on the trailing surface. In the second-pass, the flow enlarges the vortex cell close to the leading surface, and the small vortex cell on the trailing surface side contracts to disappear as the passage rotates faster. At the highest rotation number ($R_O=0.20$), the turn-induced single vortex cell becomes identical regardless of the rib configuration so that similar local heat/mass transfer distributions are observed in the fuming region for the cross- and parallel-ribbed case.

• 한국분무공학회지
• /
• 제10권2호
• /
• pp.1-9
• /
• 2005

An experimental study was carried out to obtain the fundamental data about the effects of radical ignition on premixture combustion. A CVC(constant volume combustor) divided into the sub-chamber and the main chamber was used. Numerous narrow passage holes are arranged between the main chamber and the sub-chamber. The products including radicals generated by spark ignition in tile sub-chamber derives the simultaneous multi-point ignition in the main chamber. We have examined the effects of the sub-chamber volume, the diameter and number of passage holes, and the equivalence $ratio({\Phi})$ on the combustion characteristics by means of burning pressure measurement and flame visualization. In a CVC, the overall burning time including the ignition delay became very short and the maximum burning pressure was slightly increased by the radical ignition(RI) method in comparison with those by the conventional spark ignition(SI) method. Combustible lean limit by RI method is extended by ${\Phi}=0.25$ compared with that by SI method. Also, In cases of charging the number and the diameter for the fixed total cross section of the passage holes, combustion period increased significantly at a sub-chamber with a single hole, but those of the other conditions had almost a similar tendency in the sub-chamber with 4 or more holes. regardless of equivalence ratio. Therefore, it was Proved that a critical cross section exists with the number of passage holes.

• Molecules and Cells
• /
• 제27권2호
• /
• pp.143-148
• /
• 2009

EBV-transformed lymphoblastoid cell lines (LCLs) are used as a resource for human genetic, immunological, and pharmacogenomic studies. We investigated the biological activity of 20 LCL strains during continuous long-term subculture up to a passage number of 160. Out of 20 LCL strains, 17 proliferated up to a passage number of 160, at which point LCLs are generally considered as "immortalized". The other three LCL strains lost the ability to proliferate at an average passage number of 41, during which these LCLs may have undergone cellular crisis. These non-immortal LCL strains exhibited no telomerase activity, decreased EBV gene expression, and a lower copy number of the EBV genome and mitochondrial DNA when compared with immortal LCLs. Thus, this study suggests that sustained EBV viral activity as well as telomerase activity may be required for complete LCL immortalization.

• BMB Reports
• /
• 제41권10호
• /
• pp.722-727
• /
• 2008

The present study compared the proteomic characteristics of a low passage number (L-33) and high passage number (H-81) LNCaP cell clone. Marked differences in protein expression were noted in the response of L-33 and H-81 cells to androgens. To investigate if regulation of these proteins was androgen-dependent, expression of the androgen receptor was silenced via small interfering RNA. Consistent with the proteomic data, abrogation of androgen receptor production in H-81 cells resulted in the reversed expression level into L-33 cells compared with non-treated H-81 LNCaP cells. The results clarify the progression into an androgen-independent phenotype.

• Reproductive and Developmental Biology
• /
• 제30권1호
• /
• pp.53-58
• /
• 2006

본 연구는 한우 성체 유래 귀세포(Korean bovine ear skin fibroblasts, KbESF)와 태아 섬유아세포(Korean bovine fetal fibroblasts, KbFF)를 이용한 체세포 복제(SCNT) 시 세포종류, 배양기간 그리고 융합방법이 핵이식 수정란의 발달에 미치는 영향을 알아보기 위하여 실시하였다. 태아 섬유아세포는 임신 51일령의 한우태아에서 분리하였고, 귀세포는 28개월령의 성우의 귀에서 채취하였다. 세포는 15주 동안 체외에서 배양하며 체세포 핵이식(SCNT)에 공시하였다. 융합방법을 비교하기 위해 챔버방법과 전극 바늘을 이용한 방법으로 핵과 세포질을 융합하였다. 세포의 doubling time은 KbFF에서 17.3시간, KbESF에서 24.3시간으로 나타났다. 핵이식 후 융합과 분할율은 needle 방법에서 보다 유의적으로 높았으나(각 각 76.1과 81.2%, P<0.05), 배반포 발달율은 차이가 없었다. KbESF의 경우, 배반포 발달율은 passage $5{\sim}9$(39.4%)와 $13{\sim}15$(40.4%)에서 passage $1{\sim}4$에 비하여 유의적으로 높았다(P<0.05). KbFF의 경우, 융합율은 passage $5{\sim}8$과 $13{\sim}15$에서 각각 75.0 및 76.8%로 passage $1{\sim}4$(61.5%)보다 높았으나, 난분할율과 배반포 발달율은 차이가 없었다. 결론적으로, SCNT 수정란의 발달은 융합 방법에 의해 영향을 받을 수 있으나, 계대배양 15회까지 장기배양을 한 경우는 복제수정란의 발육에 영향을 주지 않는 것으로 판단된다.

• 환경생물
• /
• 제30권3호
• /
• pp.173-184
• /
• 2012

In order to investigate the fluctuation rates [FR] of phytoplankton after passage through a cooling system, the standing crops, chlorophyll a concentrations and carbon assimilation number of phytoplankton were surveyed at intake and outlet at Wolsong nuclear power plant [NPP] from July 2006 to June 2008. As a result, the total mean standing crops of phytoplankton were $1.0{\times}10^6\;cells\;L^{-1}$ and $7.3{\times}10^5\;cells\;L^{-1}$ at intake and outlet, respectively. The FR of phytoplankton by passage through the cooling system [PTCS] was 27.0%. Among them, the FR of microplankton and nanoplankton were 34.1% and 12.4%, respectively. In addition, the FR of diatoms and dinoflagellateswere 33.9% and 29.7%, respectively. These results showed the entrainment effects on microplankton and diatoms by PTCS were higher than those of nanoplankton and dinoflagellates. The FR of total chlorophyll a concentrations were 54.4%, and the FR of microplankton, nanoplankton and picoplankton were 58.9%, 38.5%, and 52.4%, respectively. So the entrainment effects on microplankton by PTCS were higher than those of nanoplankton and picoplankton. The mean FR of carbon assimilation number of phytoplankton was 57.6%, and the seasonal variations of FR of carbon assimilation number ranged from 47.5% to 76.8%. Our results indicated that the phytoplankton species responded differently to power plant operating conditions such as elevated temperature, chlorination, and mechanical impacts.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제10권1호
• /
• pp.10-18
• /
• 2002

The objective of present study is to analyze a concentric triple-passage heat exchanger for an optimal design of a continuous hot steel-tube cooling system, where a hot-steel tube line is passing through an antioxidant gas with a constant speed. Velocities and temperatures of the inert gas flowing between inner and outer tubes are calculated theoretically for laminar and numerically for turbulent flow regimes. From their profiles Nusselt numbers and friction factors are calculated (or various ratios of inner/outer tube radii and relative velocities. With these Nusselt numbers triple-passage heat exchangers are investigated for their thermal characteristics. It is shown that heat transfer coefficients based on ratios of average heat fluxes from inner and outer tubes might result in great errors for the temperature distributions of the flows, since local heat transfer coefficients for flows through an annulus are dependent on local wall heat flux ratios.

• International Journal of Oral Biology
• /
• 제30권1호
• /
• pp.1-8
• /
• 2005

The elderly suffer from an impaired immune function being obvious in a higher susceptibility to infections. Although the inflammatory cells are the major immunomodulatory cells, fibroblasts also secrete a variety of inflammatory cytokines and chemokines. Therefore periodontal tissue aging might playa role in development and progress of periodontitis. In this study, we investigated the effect of in vitro periodontal ligament cellular aging on the inflammatory cytokines, chemokines, and matrix metalloprotease(MMP)-2 expression induced by lipopolysaccharide(LPS) treatment. Three different cell populations were used; passages 4-5, 14-15, and 24-25 (at passage 27, more than 90% cells were replicative senescent). LPS increased the expression of interleukin(IL)-1${\beta}$, IL-6, and tumor necrosis factor-${\alpha}$, IL-8, RANTES, and MMP-2. However, the order of induction folds were passages 14-15 > 4-5 > 24-25. While the expression level of Toll-like receptor(TLR) 4 decreased according to the increase in passage number, the level of TLR2 was highest at passages 14-15 and then decreased at passages 24-25. While the spontaneous expression of IL-8 decreased according to the increase in passage number, that of RANTES and proMMP-2 increased according to the increase in passage number. These results suggest that the aging of periodontal ligament fibroblasts differentially affect the role as immunomodulatory cells in response to periodontopathic bacteria and therefore might be another risk factor of periodontitis progression.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년 영문 학술대회
• /
• pp.202-212
• /
• 2008

A three-dimensional computation was conducted to understand effects of the low Reynolds number on the loss characteristics in a transonic axial compressor, Rotor67. As a gas turbine becomes smaller in size and it is operated at high altitude, the operating condition frequently lies at low Reynolds number. It is generally known that wall boundary layers are thickened and a large separation occurs on the blade surface in axial turbomachinery as the Reynolds number decreases. In this study, it was found that the large viscosity did not affect on the bow shock at the leading edge but significantly did on the location and the intensity of the passage shock. The passage shock moved upstream towards leading edge and its intensity decreased at the low Reynolds number. This change had large effects on the performance as well as the internal flows such as the pressure distribution on the blade surface, tip leakage flow and separation. The total pressure rise and the adiabatic efficiency decreased about 3% individually at the same normalized mass flow rate at the low Reynolds number. In order to analyze this performance drop caused by the low Reynolds number, the total pressure loss was scrutinized through major loss categories such as profile loss, tip leakage loss, endwall loss and shock loss.

• 한국유체기계학회 논문집
• /
• 제18권5호
• /
• pp.19-25
• /
• 2015

As a core component of a hydropower station, hydro turbines play a vital role in the integration of a power station. Research on the technology of hydro turbine is continuously increasing with the development of water electricity. On the basis of one-dimensional loss analysis, for three-dimension design, there are a lot of dimension of the internal flow passage shapes that are determined by experience. Therefore, the effect of the internal flow passage shapes on the performance and internal flow characteristics of a Francis hydro turbine model is investigated in this study. In this study, the small curvature of runner blade trailing edge shape is good for improving the efficiency of Francis turbine. The straight stay vane leading edge is good for suppressing the secondary flow. Moreover, suitable tongue passage shape and stay vane number improve the performance of the turbine considerably.