• 한국CDE학회논문집
• /
• 제7권4호
• /
• pp.240-247
• /
• 2002

Most commercial CAD systems provide parametric modeling functions, and by using these capabilities designers can edit a CAD model in order to create design variants. It is necessary to transfer parametric information during a CAD model exchange to modify the model inside the receiving system. However, it is not possible to exchange parametric information of CAD models based on the cur-rent version of STEP. The designer intents which are contained in the parametric information can be lost during the STEP transfer of CAD models. This paper introduces a hybrid CAB model translator, which also uses the feature tree of commercial CAD systems in addition to the macro file to allow transfer of parametric information. The macro-parametric approach is to exchange CAD models by using the macro file, which contains the history of user commands. To exchange CAD models using the macro-parametric approach, the modeling commands of several commercial CAD systems are analyzed. Those commands are classified and a set of standard modeling commands has been defined. As a neutral fie format, a set of standard modeling commands has been defined. Mapping relations between the standard modeling commands set and the native modeling commands set of commercial CAD systems are defined. The scope of the current version is limited to parts modeling and assemblies are excluded.

• 대한기계학회논문집
• /
• 제12권6호
• /
• pp.1227-1237
• /
• 1988

본 연구에서는 Fig.1은 본 시스템이 제품의 형상을 모델링하고 그것으로부터 어떻게 금형을 설계하는 지를 설명해주고 있다. 본 연구의 범위는 Fig.1의 점선에 의해 둘러 싸인 부분이다. 즉 본 시스템의 모델링 기능을 사용하여 생성시킨 최종제 품 형상으로부터 적당한 몰드 베이스와 그에 장착되는 금형판을 설계 생성시키는 작업 이다.수지의 유동 해석과 NC공구 경로의 계산은 개발 중에 있으며 이들과 함께 통 합되면 완전한 CAD/CAM 시스템을 Fig.1에서와 같이 구축할 수 있다.

• 전자공학회논문지B
• /
• 제30B권1호
• /
• pp.29-37
• /
• 1993

The purpose of this paper is to estimate the attitude and the position of SPOT satellite which are needed in producing DEM(Digital Elevation Model) using SPOT satellite image pairs. DEM extraction is consists of three parts. First part is the modeling of satellite position and atitude, second part is the matching of two images to find corresponding point of them and third part is to calculate the elevation of each point by using the result of the first and second part. For modeling inaccessible area, extended modeling algorithm which removes the GCP(Ground Control Point) most errorneous from the GCPs extracted from map iteratively is proposed According to the experiments using a collinearity equation, the second order polynomials are shown to the optimal for .omega.(pitch), and Zs parameters while the first order ones for .kappa.(yaw) .PHI.(roll), Xs, and Ys parameters. The input images used in this paper are 6000*6000 level 1A panchromatic digital SPOT images of Chungchong-do, Korea. With 30 GCPs, experiments on SPOT images show that the planimetric and altimetric RMS errors are 7.11m and 7.10m, respectively, for test points.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2000년도 춘계학술발표대회
• /
• pp.133-136
• /
• 2000

In recent years, hybrid neural network approaches which combine neural networks and mechanistic models have been gaining considerable interests. These approaches are potentially very efficient to obtain more accurate predictions of process dynamics by combining mechanistic and neural models in such a way that the neural network model properly captures unknown and nonlinear parts of the mechanistic model. In this work, such an approach was applied in the modeling of a full-scale coke wastewater treatment process. First, a simplified mechanistic model was developed based on the Activated Sludge Model No.1 and the specific process knowledge, Then neural network was incorporated with the mechanistic model to compensate the errors between the mechanistic model and the process data. Simulation and actual process data showed that the hybrid modeling approach could predict accurate process dynamics of industrial wastewater treatment plant. The promising results indicated that the hybrid modeling approach could be a useful tool for accurate and cost-effective modeling of biochemical processes.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.141-144
• /
• 1997

This paper presents design automation system using API and parametric modeling of solid modeler, which is applied on axial fans for cooling towers. The design data including chord length and twist angle according to the fan length are given by design program, and API functions are applied to automate the modeling and assembly process of fan blade. The boss to connect fan and motor is designed with parametric design function provided by UG so as to be flexibly changed by the value of design parameters. The process of generating 2-D drafting for parts and an assembly is also automated. With developed system, the modeling time is reduced to 5 minutes even with unskilled operators.

• Journal of electromagnetic engineering and science
• /
• 제11권3호
• /
• pp.192-200
• /
• 2011

This paper proposes a new modeling method for estimating the impedance of an on-chip power/ground meshed plane. Frequency dependent R, L, and C parameters are extracted based on the proposed method so that the model can be applied from DC to high frequencies. The meshed plane model is composed of two parts: coplanar multi strip (CMS) and conductor-backed CMS. The conformal mapping technique and the scaled conductivity concept are used for accurate modeling of the CMS. The developed microstrip approach is applied to model the conductor-backed CMS. The proposed modeling method has been successfully verified by comparing the impedance of RLC circuit based on extracted parameters and the simulated impedance using a 3D-field solver.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제8권4호
• /
• pp.254-259
• /
• 2008

Uncertainty of result of context awareness always exists in any context-awareness computing. This falling-off in accuracy of context awareness result is mostly caused by the imperfectness and incompleteness of sensed data, because of this reasons, we must improve the accuracy of context awareness. In this article, we propose a novel approach to model the uncertain context by using ontology and context reasoning method based on Bayesian Network. Our context aware processing is divided into two parts; context modeling and context reasoning. The context modeling is based on ontology for facilitating knowledge reuse and sharing. The ontology facilitates the share and reuse of information over similar domains of not only the logical knowledge but also the uncertain knowledge. Also the ontology can be used to structure learning for Bayesian network. The context reasoning is based on Bayesian Networks for probabilistic inference to solve the uncertain reasoning in context-aware processing problem in a flexible and adaptive situation.

• 산업공학
• /
• 제12권1호
• /
• pp.102-113
• /
• 1999

BOM(Bill of Material) is a description of parts, assemblies and raw materials that comprise a product structure. In manufacturing companies that produce various products with short life cycles, it is very important to manage to BOM of products with various options and versions efficiently. This paper describes an effective modeling and implementing technique of Generic BOM Management System(GBMS) for management of number of variant products. In this paper, OMT(Object Modeling Technique) was used to model a generic BOM and Object-Relational Database Management System(ORDBMS) was used to implement the GBMS database. In order to prove the effectiveness of proposed methodology, a case that assembles computer with various options was studied.

• 대한원격탐사학회지
• /
• 제16권4호
• /
• pp.347-353
• /
• 2000

The purpose of this paper is to extract DEM (Digital Elevation Model) using KOMPSAT images. DEM extraction consists of three parts. First part is the modeling of satellite position and attitude, second part is the matching of two images to find corresponding points of them and third part is to calculate the elevation of each point by using the result of the first and second part. The position and attitude modeling of satellite is processed by using GCPs. Area based matching method is used to find the corresponding points between the stereo satellite images. The elevation of each point is calculated using the exterior orientation information obtained from sensor modeling and the disparity from the stereo matching. In experiment, the KOMPSAT images, 2592$\times$2796 panchromatic images are used to extract DEM. The experiment result show the DEM using KOMPSAT images.

• 한국정밀공학회지
• /
• 제10권4호
• /
• pp.30-41
• /
• 1993

Developed in this paper is a feature based modeling system for the design of welded plat construction(WPC) which is composed of flat or bended plates represented as reference plane with a constant thickness. First, the necessity and the characteristics of the modeing system for WPC as compared with the assembly of mechanical parts are investigated. Secondly, feature library for the assembly of WPC is shown which contains several types of features like joint feature, groove feature, material feature, and precision feature. Thirdly, the assembly procedures are presented which mainly consist of both the assembly transformation and the correct assembly checking. Fourthly, weld lines of the assembled WPC are defined so that those can be used in the process planning or the manufacturing stage. Finally, a prototype by a geometric modeling software Pro/Engineer, a graphic software GL(Graphic Library), and C language on a CAD workstation IRIS.