• 공업화학
• /
• 제25권2호
• /
• pp.147-151
• /
• 2014

많은 고분자 공정에서 고분자에서의 유기 용매와 같은 저분자 물질의 확산은 중요하다. 고분자에서의 저분자 물질의 이동은 중합 반응기의 효율성과 제조된 고분자의 특성을 결정한다. 공정을 설계하고 최적화하는데 중요한 물성값은 고분자/용매 상호확산 계수이다. 용매의 농도가 매우 낮은 무한희석 상태에서의 고분자/용매 계의 무한확산계수를 측정하기 위해서 capillary column inverse gas chromatography (CCIGC) 기법이 흔히 사용된다. 이 기법을 사용하면 비교적 짧은 시간에 확산계수와 분배계수를 측정하는 것이 가능하다. 본 연구에서는 CCIGC 기법을 사용해서 styrene/butadiene/styrene (SBS) 블록 공중합체에서 환형 구조를 가지는 용매의 확산계수와 분배계수를 다양한 온도 범위에서 측정하였다.

• Macromolecular Research
• /
• 제11권4호
• /
• pp.283-290
• /
• 2003

Organic drugs including aspirin, omeprazole, and naproxen with three different levels of octanol/water partition coefficient were examined for their release behavior from the amphiphilic PCL-b-PEO-b-PCL (PCEC) matrix. Scanning electron micrograph (SEM) of PCEC illustrated a well defined two-phase morphology consisted of dispersed poly(ethylene oxide) (PEO) domain and continuous polycaprolactone (PCL) phase. Differential scanning calorimetry (DSC) and X-ray diffractometry (XRD) experiments veri tied that three model drugs are dissolved as a molecular dispersion in PCEC matrix. The release of hydrophilic aspirin closely followed the water absorption profile of the matrix indicating that its major fraction is present in PEO domain. However, substantial amount of aspirin present in less hydrophilic region displayed discontinuous biphasic release pattern. In the case of omeprazole with intermediate hydrophobicity consistent release behavior was observed for a period of 24 hrs after the rapid liberation of ca. 10% of the drug presumably partitioned in PEO phase. It was ascribed to the fact that the progressive hydration of PCEC matrix gradually increased the chance of drug/water exposure to compensate the exhaustion of device. Naproxen with the highest octanol/water distribution coefficient among three model drugs exhibited a limited release of 35% for 24 hrs. Finally, hydroxypropyl methylcellulose phthalate (HPMCP)/PCEC blend matrix demonstrated an accelerated and quantitative release of hydrophobic naproxen by generating high porosity and thereby expanding polymer/water interface.

• 산업식품공학
• /
• 제14권4호
• /
• pp.354-358
• /
• 2010

The methods for determining the diffusion parameters for the diffusion of d-limonene, a major volatile compound of orange juice, through a multi-layered food packaging material and predicting its absorption into the packaging material have been investigated. The packaging material used was the 1.5-mm thick multi-layered packaging material composed of high impact polystyrene (HIPS), polyvinylidene chloride (PVDC), and low density polyethylene (LDPE). Orange juice was placed in a cell where volatiles were absorbed in the sample package and kept at $23{\pm}2^{\circ}C$ for 72 hr. The d-limonene absorbed in a 1.5-mm thick multi-layered food packaging material was analyzed by a solid phase micro-extraction (SPME). The absorption parameters for the absorption of d-limonene in the packaging material were determined and absorption of d-limonene into the packaging material was predicted using absorption storage data. The SPME desorption at $60^{\circ}C$ for 1 hr resulted in the most sensitive and reproducible results. The diffusion coefficients of d-limonene in the packaging material and the partition coefficient at $23{\pm}2^{\circ}C$ were approximately $1-2{\times}10^{12}m^2$/s and 0.03, respectively. The absorption profile no earlier than 30 hr was fit well by a model derived from the Fick's law.

• Journal of the korean society of oceanography
• /
• 제33권3호
• /
• pp.64-70
• /
• 1998

Forty sediment samples from Kyeonggi Bay, Korea were analyzed for butyltins, including tributyltin (TBT), dibutyltin (DBT), and monobutyltin (MBT) to determine their distribution and source in this area. Total butyltin concentrations in Kyeonggi Bay sediments ranged from 0.8 to 297 ng/g dry wt. with a mean value of 38 ng/g. The highest butyltin concentration was found in the innermost site in Incheon Harbor basin. The mouth of Han River had higher butyltin levels in sediments compared to open ocean. Butyltin levels correlated well with organic carbon content of sediment, but the major factor was the distance from the source area where antifouling paints were used for vessels and marine structures. Butyltin concentrations in the study area were lower than those reported for bays in other parts of the world. Considering the high toxic potential and sediment/water partition coefficient of TBT, further studies are needed to assess its biological effect in the marine ecosystem of Kyeonggi Bay.

• Journal of Microbiology and Biotechnology
• /
• 제7권5호
• /
• pp.345-351
• /
• 1997

An aqueous/organic two-phase reaction system was applied to the production of catechol using immobilized resting cells of Pseudomonas putida CY 400. Water/ethyl ether system was used because of high partition coefficient of catechol and thus to reduce the product inhibition and degradation. Among the tested immobilization carriers, polyacrylamide gel gave the highest catechol productivity. The immobilization seemed to protect the cells against solvent toxicity. From the simulation of reaction conditions based on two-phase models, it was found that there was an optimum acetate concentration at fixed benzoate and cell concentrations for the catechol productivity. A lower phase volume ratio (lower fraction of organic phase) gave a higher productivity. However, the substrate conversion was low at low phase volume ratio.

• Biomolecules & Therapeutics
• /
• 제1권2호
• /
• pp.204-210
• /
• 1993

The distribution and excretion of DWC-751, a new cephalosporin, were examined in rats and mice following a single intravenous administration. DWC-751 in plasma and urine was determined by both HPLC and microbiological assay. The plasma concentration of the drug declined biexponentially. The initial and terminal half lives of the drug were 3.0 and 28.3 min, respectively. Binding of the drug to plasma proteins was 42.3%. The distribution volume at steacly-state ($Vd_{ss}$) was only 0.341 ι/kg, which is well correlated with the low n-octanol/water partition coefficient of the drug ($K_{o/w{\cong}0$) Actually, the drug was distributed to liver, kidney and lung with very low organ/plasma concentration ratio. The drug, was excreted mainly via renal excretion, i.e., the total($CL_T$) and apparent renal($CL_{R}$) clearances of the drug were 10.8 and 7.5 ml/min/kg, respectively.

• Communications for Statistical Applications and Methods
• /
• 제3권3호
• /
• pp.205-214
• /
• 1996

As flexible Bayesian test criteria for nested point null hypotheses of multiple regression coefficients, partial and overall Bayes factors are introduced under a class of intuitively meaningful prior. The criteria lead to a simple method for considering different prior beliefs on the subspaces that constitute a partition of the coefficient parameter space. A couple of tests are suggested based on the criteria. It is shown that they enable us to obtain pairwise comparisons of hypotheses of the partitioned subspaces. Through a Monte Carlo simulation, performance of the tests based on the criteria are compared with the usual Bayesian test (based on Bayes factor)in terms of their respective powers.

• 한국연초학회지
• /
• 제10권1호
• /
• pp.49-57
• /
• 1988

The phenolic compounds were isolated from the cigarette smoke condensate using two immiscible organic solvents by a partition coefficient. Of them, 20 phenolic compounds were identified by GC and GC/MS. The amount of the phenolic compounds was phenol, p-crestol, hydroxybensoic acid in order. And there was no difference in composition of these compound dependent on leaf tobacco . About 70% amount of these compounds were absorbed to cellulose acetate filter used. The contents and composition of these compounds were various in the commercial cigarette.

• 한국경영과학회지
• /
• 제25권4호
• /
• pp.1-14
• /
• 2000

The methods of sensitivity analysis for linear programming can be classified in two types: sensitivity analysis using an optimal solution, and sensitivity analysis using an approximate optimal solution. As the methods of sensitivity analysis using an optimal solution, there are three sensitivity analysis methods: sensitivity analysis using an optimal basis, positive sensitivity analysis, and optimal partition sensitivity analysis. Since they may provide different characteristic regions under degeneracy, it is not easy to understand and apply the results of the three methods. In this paper, we propose a generalized sensitivity analysis that can integrate the three existing methods of sensitivity analysis. When a right-hand side or a cost coefficient is perturbed, the generalized sensitivity analysis gives different characteristic regions according to the controlling index set that denotes the set of variables allowed to have positive values in optimal solutions to the perturbed problem. We show that the three existing sensitivity analysis methods are special cases of the generalized sensitivity analysis, and present some properties of the generalized sensitivity analysis.

• 한국잠사곤충학회지
• /
• 제31권1호
• /
• pp.45-54
• /
• 1989

본 연구에서는 견에 대한 산성염료의 염착기구를 규명하기 위하여 전하수가 다른 산성염료에 의한 흡착실험을 수행하여, 견섬유와 피브로인막의 구조와 염료의 구조를 관련시켜서 산성염료의 흡착거동에 관한 해석을 하였다. 산성염료에 sulfonic acid group이 도입됨에 따라서 partition coefficient(Kp)는 감소하였지만 Langmuir type sorption constant(KL)는 증가하였고, 염욕의 pH와 온도의 증가에 따라서도 Kp, KL 값은 증가하였다. 전하수가 1, 2인 Dye I과 Dye II는 견섬유와 피브로인 막에 대하여 stoichiometric adsorption이 잘 적용될 수 있었으나 전하수가 3인 Dye III는 잘 적용되지 않았다. sulfonic acid group이 산성염료에 도입됨에 따라 각각의 sulfonic acid group의 표준친화력은 감소하였고, 모든 엔탈피 값은 음(-)으로 나타난 반면에 엔트로피 값은 양(+)으로 나타났다. 견섬유와 피브로인 막의 흡착 constant를 비교한 결과, 견 피브로인에 대한 산성염료의 흡착거동은 견 피브로인의 구조에 영향을 받는다는 것을 알 수 있다.