• 한국재료학회지
• /
• 제7권2호
• /
• pp.145-151
• /
• 1997

AI-xSi/ySiC( x:6~18wt%, y: 3~9wt%, SiC 입자크기: $10~28{\mu}m$) 복합재료를 재용해한 후 항온 유지하고 응고 시킬때 SiC 입자가 몰드의 하부로 침강하는 현상을 계통적으로 조사하였다. AI-Si/SiC 복합재료 용탕을 항온으로 유지하면 입자가 없는 지역은 유지시간이 약 처음 30분 동안 빠르게 증가한다. SiC 입자가 크기가 클수록 SiC입자의 크기가 클수록 SiC입자의 침강속도가 빠르다. 또한 복합재료중 철가한 SiC 입자의 부피분율이 증가하면 입자의 침강속도는 감소한다.

• Wind and Structures
• /
• 제4권5호
• /
• pp.441-454
• /
• 2001

Conical vortices on roof corners of a prismatic low-rise building have been investigated by using the PIV(Particle Image Velocimetry) technique. The Reynolds number based on the free stream velocity and model height was $5.3{\times}10^3$. Mean and instantaneous vector fields for velocity, vorticity, and turbulent kinetic energy were measured at two vertical planes and for two different flow angles of $30^{\circ}$ and $45^{\circ}$. The measurements provided a clear view of the complex flow structures on roof corners such as a pair of counter rotating conical vortices, secondary vortices, and tertiary vortices. They also enabled accurate and easy measurement of the size of vortices. Additionally, we could easily locate the centers of the vortices from the ensemble averaged velocity fields. It was observed that the flow angle of a $30^{\circ}$ produces a higher level of vorticity and turbulent kinetic energy in one of the pair of vortices than does the $45^{\circ}$ flow angle.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제9권4호
• /
• pp.390-403
• /
• 2017

Smoothed Particle Hydrodynamics (SPH) method has a good adaptability for the simulation of free surface flow problems. There are two forms of SPH. One is weak compressible SPH and the other one is incompressible SPH (ISPH). Compared with the former one, ISPH method performs better in many cases. ISPH based on Rankine source solution can perform better than traditional ISPH, as it can use larger stepping length by avoiding the second order derivative in pressure Poisson equation. However, ISPH_R method needs to solve the sparse linear matrix for pressure Poisson equation, which is one of the most expensive parts during one time stepping calculation. Iterative methods are normally used for solving Poisson equation with large particle numbers. However, there are many iterative methods available and the question for using which one is still open. In this paper, three iterative methods, CGS, Bi-CGstab and GMRES are compared, which are suitable and typical for large unsymmetrical sparse matrix solutions. According to the numerical tests on different cases, still water test, dam breaking, violent tank sloshing, solitary wave slamming, the GMRES method is more efficient than CGS and Bi-CGstab for ISPH method.

• Journal of Astronomy and Space Sciences
• /
• 제32권4호
• /
• pp.281-287
• /
• 2015

Two mini neutron monitors are installed at Concordia research station (Dome C, Central Antarctica, $75^{\circ}06^{\prime}S$, $123^{\circ}23^{\prime}E$, 3,233 m.a.s.l.). The site has unique properties ideal for cosmic ray measurements, especially for the detection of solar energetic particles: very low cutoff rigidity < 0.01 GV, high elevation and poleward asymptotic acceptance cones pointing to geographical latitudes > $75^{\circ}S$. The instruments consist of a standard neutron monitor and a "bare" (lead-free) neutron monitor. The instrument operation started in mid-January 2015. The barometric correction coefficients were computed for the period from 1 February to 31 July 2015. Several interesting events, including two notable Forbush decreases on 17 March 2015 and 22 June 2015, and a solar particle event of 29 October 2015 were registered. The data sets are available at cosmicrays.oulu.fi and nmdb.eu.

• 대한조선학회논문집
• /
• 제37권3호
• /
• pp.37-44
• /
• 2000

수면 하에서 정속으로 움직이는 MACA0012 수중익에 의하여 생성되는 정상파 및 쇄파에 대한 실험적 연구를 회류수조에서 수행하였다. 실린더의 몰수깊이에 따른 자유표면 파형을 관측하였고, PIV를 이용하여 수중익과 자유표면 사이 유동장의 순간속도와 평균속도를 계측한 후 와도분포를 구하였다. 쇄파의 발생, 전개 그리고 소멸과정을 조사하였고, 특히 자유표면 부근의 와류 구조와 같은 복잡 순간유동장의 가시화를 통하여 수중익과 쇄파 간의 상호작용을 해석하고자 하였다. 본 실험으로 PIV 계측기법은 조선해양공학의 다양한 연구분야에 훌륭히 적용될 수 있음을 보았고 더욱이 정량적인 해석이 필요한 실험에도 사용이 가능함을 확인하였다.

• 정보처리학회논문지B
• /
• 제19B권3호
• /
• pp.177-182
• /
• 2012

본 논문에서는 대규모 실내 환경에서 WiFi 모듈이 내장된 스마트폰 사용자의 위치를 추적하기 위한 효과적인 이동 모델과 관측 모델을 제시한다. 제안하는 세 가지 부속 이동 모델들은 보행자의 움직임에 대한 더 정확한 예상 확률 분포를 제공한다. 또, 가우시안 보간법 기반의 관측 모델은 훈련 데이터 의 수집이 이루어지지 않은 지역들에 대해서도 관측 우도 계산을 가능하게 한다. 파티클 필터 프레임워크 속에 이와 같은 이동 모델과 관측 모델을 결합함으로써, 본 연구의 위치 추적 알고리즘은 대규모 실내 환경들에서도 스마트폰 사용자의 위치를 정확하게 추적할 수 있다. 한 복층 건물에서 안드로이드 스마트폰으로 수행한 실험을 통해, 본 연구에서 제안한 WiFi 위치 추적 알고리즘의 성능을 확인할 수 있었다.

• 한국대기환경학회지
• /
• 제16권5호
• /
• pp.529-537
• /
• 2000

Several Pt-based oxidation catalysts with different loading were prepared with various metal precursor solutions and characterized with H$_2$ chemisorption and TEM for Pt particle size. V was added to Pt-based catalyst for inhibiting SO$_2$oxidation reaction, as result, Pt-V/Ti-Si catalyst prepared by ERMS(Free Reduced Metal in Solution) method showed high enough activity and better inhibition on SO$_2$oxidation than Pt only catalyst. Optimum Pt particle size for diesel oxidation reaction turned out to be the size of around 20 nm. A prototype catalyst was prepared for light=duty diesel passenger car, and teated for the emission reduction performance with Korean regulation test mode(CVS-75 mode) on chassis dynamometer. The catalyst shows the performance reduction of 75~94% for CO, 53~67% for HC and 10~31% for PM. In the case of heavy-duty diesel catalyst, the domestic formal regulation teat mode D-13 was adopted for both Na engine and Turbo engine. The conversions of CO and THC are high enough(86% and 41%) while the reductions of NOx and PM are relatively low(3~11%).

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제37회 추계학술대회논문집
• /
• pp.737-744
• /
• 2011

탄화수소 계열의 점화원과 달리 선행 연구된 스팀 플라즈마 점화기를 이용한 알루미늄 분말의 지속 연소 성공을 바탕으로, 고온의 플라즈마를 이용한 알루미늄 분말의 점화 특성을 알아보기 위해 산화제가 없는 환경을 조성하여 점화 특성 확인 실험을 수행하였다. 아르곤 플라즈마를 이용하여 이전의 연소 실험과 동일한 4500 K의 온도 조건 및 이송 가스를 이용한 입자 공급 조건을 조성하여 실험을 수행하였으며, 플라즈마의 온도는 방출분광법을 사용하여 측정하였고 점화 특성은 SEM 촬영과 EDS 분석을 통해 비교 분석하였다. 고온의 플라즈마 제트 내부를 통과한 알루미늄 분말은 탄화수소 계열의 점화원과 다르게 급격한 기화로 인한 점화 촉진 효과를 확인 할 수 있었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 춘계학술대회 논문집 반도체재료
• /
• pp.34-37
• /
• 2001

As the integrated circuit device shrinks to smaller dimensions, chemical mechanical polishing (CMP) process was required for the global planarization of inter-metal dielectric (IMD) layer with free-defect. However, as the inter-metal dielectrics (IMD) layer gets thinner, micro-scratches are becoming as major defects. Micro-scratches are generated by agglomerated slurry, solidified and attached slurry in pipe line of slurry supply system. To prevent agglomerated slurry particle from inflow, we installed 0.5${\mu}m$ POU (point of use) filter, which is depth-type filter and has 80% filtering efficiency for the $1.0{\mu}m$ size particle. In this paper, we studied the relationship between defect generation and pad count to understand the exact efficiency of the slurry filtration, and to find out the appropriate pad usage. Our preliminary results showed that it is impossible to prevent defect-causing particles perfectly through the depth-type filter. Thus, we suggest that it is necessary to optimize the flow rate of slurry to overcome depth type filters weak-point, and to install the high spray of de-ionized Water (DIW) with high pressure.

• Macromolecular Research
• /
• 제15권6호
• /
• pp.547-552
• /
• 2007

Water soluble polymer, poly(vinyl pyrrolidone) was chosen to conjugate with 1,2-dioleoyl-sn-glycero-3-phosphoethanolamine-N-(succinyl) (N-succinyl DPPE) to make a new drug delivery system. PVP with an amine group (amino-PVP) was polymerized by free radical polymerization. The amine group of amino-PVP was conjugated with the carboxylic group of N-succinyl DPPE. The resultant conjugate could form nanoparticles in the aqueous solution; these nanoparticles were termed a lipid-polymer system. The critical aggregation concentration was measured with pyrene to give a value of $1{\times}10^{-3}g/L$. The particle size of the lipid-polymer system, as measured by DLS, AFM and TEM, was about 70 nm. Lipophilic component in the inner part of the lipid-polymer system could derive the physical interaction with hydrophobic drugs. Griseofulvin was used as a model drug in this study. The loading efficiency and release profile of the drug were measured by HPLC. The loading efficiency was about 54%. The release behavior was sustained for a prolonged time of 12 days. The proposed lipid-polymer system with biodegradable and biocompatible properties has promising potential as a passive-targeting drug delivery carrier because of its small particle size.