• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.8
• /
• pp.3835-3838
• /
• 2016

Background: Breast cancer is one of the most frequent cancer types within female populations. Silibinin is a chemotherapeutic agent ative against cancer. Niosomes are biodegradable, biocompatible, safe and effective carriers for drug delivery. Objective:To prepare nanoniosomal silibinin and evaluate its cytotoxicity inthe T-47D breast cancer cell line. Materials and Methods: Niosomes were prepared by reverse phase evaporation of a mixture of span 20, silibinin, PEG-2000 and cholesterol in chloroform and methanol solvent (1:2 v/v). The solvent phase was evaporated using a rotary evaporator and the remaining gel phase was hydrated in phosphate buffer saline. Mean size, size distribution and zeta potential of niosomes were measured with a Zetasizer instrument and then nanoparticles underwent scanning electron microscopy. The drug releasing pattern was evaluated by dialysis and the cytotoxicity of nanoniosomes in T-47D cells was assessed by MTT assay. Results: Particle size, size variation and zeta potential of the niosomal nanoparticles were measured as $178.4{\pm}5.4nm$, $0.38{\pm}0.09$ and $-15.3{\pm}1.3mV$, respectively. The amount of encapsulated drug and the level of drug loading were determined $98.6{\pm}2.7%$ and $22.3{\pm}1.8%$, respectively; released drug was estimated about $18.6{\pm}2.5%$ after 37 hours. The cytotoxic effects of nanoniosome were significantly increased when compared with the free drug. Conclusions: This study finding suggests that silibinin nanoniosomes could serve as a new drug formulation for breast cancer therapy.

• Journal of Electrochemical Science and Technology
• /
• v.6 no.4
• /
• pp.121-130
• /
• 2015

The micro emulsion method has been successfully used for preparing perovskite LaCoO₃ with uniform, fine-shaped nanoparticles showing high activity as electro catalysts in oxygen reduction reactions (ORRs). They are, therefore, promising candidates for the air-cathode in metal-air rechargeable batteries. Since the activity of a catalyst is highly dependent on its specific surface area, nanoparticles of the perovskite catalyst are desirable for catalyzing both oxygen reduction and evolution reactions. Herein, LaCoO₃ powder was also prepared by sol-gel method for comparison, with a broad particle distribution and high agglomeration. The electro catalytic properties of LaCoO₃ and LaCoO₃-carbon Super P mixture layers toward the ORR were studied comparatively using the rotating disk electrode technique in 0.1 M KOH electrolyte to elucidate the effect of carbon Super P. Koutecky-Levich theory was applied to acquire the overall electron transfer number (n) during the ORR, calculated to be ~3.74 for the LaCoO₃-Super P mixture, quite close to the theoretical value (4.0), and ~2.7 for carbon-free LaCoO₃. A synergistic effect toward the ORR is observed when carbon is present in the LaCoO₃ layer. Carbon is assumed to be more than an additive, enhancing the electronic conductivity of the oxide catalyst. It is suggested that ORRs, catalyzed by the LaCoO₃-Super P mixture, are dominated by a 2+2-electron transfer pathway to form the final, hydroxyl ion product.

• Journal of the Korean Ceramic Society
• /
• v.34 no.2
• /
• pp.188-194
• /
• 1997

Wet gel with surface modification by TMCS was redispersed in EtOH and redispersed silica sol for coat-ing was prepared. After spin coating of redispersed sol was conducted on silicon substrate, processes of drying(8$0^{\circ}C$) and heat treatment(>25$0^{\circ}C$) were, followed at ambient pressure. The influence of heat treat-ment of properties of film was observed, changing temperature at heat treatment. The optimum redisp-ersion condition for stable silica sol was wet gel:EtOH=1g:110$m\ell$ and the concentration and viscosity of redispersed silica sol with average particle size of 30nm were 0.11 M, 2.0-2.2 cP respectively. Crack-free thin film with the refractive index of 1.14 and thickness of 400 nm was obtained through drying at 8$0^{\circ}C$ and subsequent heat treatment at 45$0^{\circ}C$ for 2 hrs respectively after spin coating of 1500rpm, 10 times.

• Biomedical Science Letters
• /
• v.10 no.4
• /
• pp.515-521
• /
• 2004

To measure regional cerebral blood volume (rCBV) with perfusion MR imaging of cerebral fat embolism by neutral fat and free fatty acids in cats. Triolein (group 1, n=15), oleic acid (group 2, n=9) and linoleic acid (group 3, n=11) were infused into unilateral internal carotid artery using microcatheter through the transfemoral approach. PVA particle was used as a non-fat embolic material in a control group (group 4, n=9). Perfusion-weighted MR image was obtained at 30 minutes and 2 hours postembolization, based on T2-and diffusion-weighted images. The data of lesion and contralateral normal area were transferred to personal computer, time-to-signal intensity curve was drawn and trans for used to △R2/sup */ curve in regular order. The process in the personal computer was done by using the author's developmental image processing program and interactive data language (IDL) softwares. Statistical significance was approved by paired t-test and ANOVA. rCBV of the lesion was decreased comparing to the normal area in all groups. The ratios of rCBV were as follows (group No, at 30 minutes, at 2 hours); group 1,32％, 51％; group 2, 30％, 44％; group 3, 39％, 61％; group 4, 21％, 36％. rCBVs of 2 hours was significantly increased compared to those of 30 minutes in all groups (P<0.005). rCBV was decreased at 30 minutes in cerebral fat embolism and recovered a little, but significantly at 2 hours. Perfusion-weighted images was useful method in offering hemodynamic information in cerebral fat embolism.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.11a
• /
• pp.17-18
• /
• 2007

Solid oxide fuel cells are clean, pollution-free technology for the electrochemical generation of electricity at high efficiency. Specially, the polarization resistance between electrolyte and electrode of SOFC unit cell is of importance, because it is desirable to develop SOFC operating at intermediate temperature below $800^{\circ}C$. The LSCF cathode prepared using modified oxalate method was investigated with different electrolyte. A precursor was prepared with oxalic acid, ethanol and $NH_4OH$ solution. The LSCF precursor was prepared at $80^{\circ}C$, and pH control was 2, 6, 8, 9 and 10. The precursor powder was calcined at $800^{\circ}C$, $1000^{\circ}C$ and $1200^{\circ}C$ for 4hrs. The crystal of LSCF powders show single phase at pH 2, 6, 8 and 9, and the average particle size was about $3{\mu}m$. The LSCF cathode with heat treatment at $1200^{\circ}C$ showed a plot of electric conductivity versus temperature. Unit cell prepared from the LSCF cathode, buffer layer between cathode and electrolyte and the LSGM, YSZ, ScSZ and CeSZ electrolyte. Also interface reaction between LSCF, buffer layer and electrolyte were measured by EPMA and the polarization resistance for unit cell with cycle measure using a Solatron 1260 analyzer.

• Journal of the Korean Ceramic Society
• /
• v.13 no.1
• /
• pp.35-44
• /
• 1976

The effect of quartz which exists in clays, especially in kaolin used for the production of chamotte sagger, on the strength of refractory was examined. In this study, a mixture of chamotte 50%, kaolin 25%, plastic clay 25% in ternary component system was selected as a batch composition. To this mixture 1%, 3% and 5% of feldspar and sericite were added respectively. The plastic clay used here was separated under 170 mesh by dry process. Feldspar and sericite were separated under 325 mesh by dry process. Feldspar and sericite were separated under 325 mesh by dry process. In order to change the particle size and the content of quartz, the kaolin was separated under 60, 115, 170 and 325 mesh by wet process, substituted quartz for coarse parts of it. Chamotte was classified into three grades, coarse (5-10mesh): medium (10-20mesh): fine(20-115mesh) and the ratio was 1:1:1. Samples were formed in 0.8xIx10cm size with 12.5% water at 160kg/$\textrm{cm}^2$ pressure, and fired at 130$0^{\circ}C$ for 1 hr. The fired samples were ivnestigated by means of x-ray diffraction analysis and microscopic observation, and the physical properties of them were also examined, such as firing shrinkage, apparent specific gravity and bulk specific gravity, apparent porosity, water absorption and modulus of rupture. The obtained results are as follows: 1. When screened kaolin with low content of quartz was added to fixed chamotte-plastic clay system, the sample lowered modulus of rupture and increased apparent porosity as the size of kaolin became finer. 2. When kaolin under 325 mesh with 7.2-15.81% quartz between 60-325 mesh was added to fixed chamotte-plastic clay system, the sample had higher apparent porosity and lower modulus of ruputure as the size and the amount of quartz became larger. 3. The addition of feldspar and sericite to chamotte-plastic clay system improved apparent porosity and modulus of rupture. The effect of feldspar was better when quartz content was low, although that of sericite was better than quartz content was high.

• Journal of the Korean Applied Science and Technology
• /
• v.31 no.2
• /
• pp.238-243
• /
• 2014

The mechanical properties of NATM resin were measured by SEM, FT-IR spectra, tensile properties, mole ％ of [NCO/OH], and particle size analyzer on stainless steel. Growing concerns in the environment-friendly NATM resin, we have synthesized the solvent-free NATM resin to be coating on metals such as stainless. The properties of the synthesized NATM resin to be contained polyols, MDI, silicone surfactant, fillers and crosslink agents(diethyltoluene diamine, anhydrosorbitol), that they have highly stronger in intensity and longer durability than general NATM resin to be contained polyols, IPDI, silicone surfactant, fillers in general packing materials and coatings. The rigid segments of polyurethane in mechanical properties of coatings were due to cross linkage and the increase mole % of [NCO/OH]. In conclusion, the NATM microstructure with cross linkage can be good material for coating of anticorrosion of metal substrates such as stainless steel.

• Korean Journal of Materials Research
• /
• v.28 no.1
• /
• pp.6-11
• /
• 2018

There are various manufacturing processes for pure $SiO_2$ that is used as abrasives, chemicals, filters, and glasses, and in metallurgy and optical industries. In the optical fiber industry, to produce $SiO_2$ preform, $SiCl_4$ is utilized as a raw material. However, the combustion reaction of $SiCl_4$ has caused critical environmental issues, such as ozone deficiency by chlorine compounds, the greenhouse effect by carbon dioxide and corrosive gas such as hydrochloric acid. Thus, finding an alternative source that does not have those environmental issues is important for the future. Octamethylcyclotetrasiloxane (OMCTS or D4) as a chlorine free source is recently promising candidate for the $SiO_2$ preform formation. In this study, we first conducted a vaporizer design to vaporize the OMCTS. The vaporizer for the OMCTS vaporization was produced on the basis of the results of the vaporizer design. The size of the primary particle of the $SiO_2$ formed by OMCTS was less than 100 nm. X-ray diffraction patterns of the $SiO_2$ indicated an amorphous phase. Fourier-transform infrared spectroscopy analysis revealed the Si-O-Si bond without the -OH group.

• Membrane Journal
• /
• v.24 no.1
• /
• pp.20-30
• /
• 2014

A membrane-coupled sequencing batch reactor (MSBR) was used for the advanced treatment of rural village sewage which is very low C/N ratio. The effect of powdered activated carbon, aeration rate, and external organic material loadings on the treatment efficiency and filtration performance were investigated in sequencing batch reactor, in which a flat-sheet type microfiltration membrane with a pore size of $0.4{\mu}m$ was submerged. At the initial operation (within 54 days) MLSS concentration, and the removal efficiencies of COD, T-N, and T-P were increased with the increase of C/N ratio. After 89 days the removal efficiencies of COD, T-N, and T-P were 97.1%, 75.0%, and 48.3%, respectively. Suspended solid-free effluent was obtained by membrane filtration. The T-P removal was relatively low because of depending on the amount of excess sludge wasting. During the operation of MSBR with powdered activated carbon, the particle size of the sludge reduced by the increase of collision frequency and mixing intensity. In comparison with MSBR without powdered activated carbon, TMP of MSBR with that was significantly elevated.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.8
• /
• pp.1165-1169
• /
• 2002

Palm kernel cake (PKC), a by-product of oil palm seeds after extraction of their oil. The aim of this study was to investigate the effects of different levels of PKC on growth performance and blood lipids in rats. A total of 64 Sprague-Dawley (8 weeks of age) male rats were assigned individually to four treatments with different levels of PKC in the diet: 0, 15, 20 and 25%. No differences (p<0.05) were found in daily feed intake (6-8 g/day), body weight, growth rate and epididymal fat weight for all the dietary groups. Plasma protein and very low density lipoprotein (VLDL) triacylglycerol (TG) were higher (p<0.05) for 20% PKC fed rats than the control rats. Conversely, the plasma cholesterol and TG and VLDL-phospholipid (PL) concentrations of the control rats were higher (p<0.05) than those of PKC fed rats. The VLDL-protein, total cholesterol, free cholesterol (FC) and cholesteryl ester (CE) were not significantly different (p>0.05) among the treatment groups. Rats fed PKC had greater (p<0.05) ratios of total surface to core lipid components [(FC+PL)/(CE+TG)] than control rats. The results reflect dissimilarities of VLDL particle size between PKC treatment and control rats, where the plasma of the PKC treated rats contained more lipid rich VLDL. In conclusion, there was no adverse effect on growth performance when inclusion of PKC up to 25%. However, fibre content may affect the plasma lipid concentrations.