• Biotechnology and Bioprocess Engineering:BBE
• /
• 제11권6호
• /
• pp.503-509
• /
• 2006

Molecularly imprinted polymeric microbeads (MIPMs) were prepared by the suspension and modified suspension polymerization methods using D-phenylalanine as the template, methacrylic acid as the functional monomer, ethylene glycol dimethacrylate as the cross-linker, toluene as the porogen, polyvinyl alcohol as the stabilizer, and sodium dodecyl sulfate as the surfactant. The addition of a surfactant to the conventional suspension polymerization mixture decreased the mean particle size of the MIPMs and increased the adsorption selectivity. For the modified suspension polymerization method, the mean particle size of the MIPMs was smaller than the particle size of MIPMs prepared via conventional suspension polymerization. Moreover, the adsorption selectivity improved considerably compared to the adsorption selectivities of MIPs reported previously.

• Applied Microscopy
• /
• 제32권4호
• /
• pp.311-317
• /
• 2002

입자 크기에 따라 상전이 경로가 달라지며 매우 큰 응집체로 존재하는 gibbsite 분말과 같은 재료의 정량적인 전이 구조 분석의 전제로서 입자 크기가 선택적인 TEM 시편의 준비가 절실히 요구된다. 입자 크기 선택성을 실현한 TEM 시편 준비의 방법론을 확립하기 위한 방안으로서 본 실험이 전개되었다. 약 1 wt%의 gibbsite 원료 분말을 에탄올 용매에 혼합 한 뒤, ball-milling에 의해 조분쇄 처리를 하고 증류수에 1 : 19의 비로 희석된 분산 조제, Darvan C, 0.25 vol%의 첨가와 함께 ultrasonic 처리를 하여 gibbsite suspension을 만들었다. 제조된 gibbsite suspension의 누적 농도 변화 관찰에 의한 침강 시간의 조정 후 정적 침강 분리에 의해 nm 크기별로 분리된 TEM 시편을 만들 수가 있었다. 시편의 전체적인 양상은 SEM으로 관찰하였고 개개 입자들의 morphology 는 TEM으로 분석하였다. 또한, 공정 과정 중의 상변화 가능성을 검토하기 위해 XRD 분석을 실시하였다.

• Nuclear Engineering and Technology
• /
• 제55권2호
• /
• pp.640-647
• /
• 2023

Material corrosion in nuclear power plant (NPP) is not controlled only by amine injection but also by ion exchange (IX) which is the best option to remove trace Na⁺. This study was conducted to understand the Na⁺ leakage characteristics of IX beds packed with ethanolamine-form (ETAH-form) and hydrogen-form (H-form) resins in the simulated water-steam cycle in terms of intrinsic behaviors of four kinds of cation-exchange resins through ASTM test and Vanselow mass action modeling. Na⁺ was inappreciably escaped throughout the channel created in resin layer. Na⁺ leakage from IX bed was non-linearly raised because of its decreasing selectivity with increasing Na⁺ capture and with increasing the fraction of ETAH-form resin. Na⁺ did not reach the breakthrough earlier than ETAH⁺ and NH₄⁺ due to the increased selectivity of Na⁺ to the cation-exchange resin (H⁺ < ETAH⁺ < NH₄⁺ ≪ Na⁺) at the feed composition. Na⁺ leakage from the resin bed filled with small particles was decreased due to the enhanced dynamic IX processes, regardless of its low selectivity. Thus, the particle size is a predominant factor among intrinsic properties of IX resin to reduce Na⁺ leakage from the condensate polishing plant (CPP) in NPPs.

• KSBB Journal
• /
• 제5권4호
• /
• pp.397-402
• /
• 1990

Hydrolysis of inulin was investigated employing various commercially available resin catalysts for the production of high grade fructose syrup. The particle size and porosity of the resin significantly affected the distribution of the products, indicating that the intraparticle diffusion of reactants controls thc selectivity as well as the reaction rate. To confirm the effect of the intraparticle diffusion, two different types of resin catalysts were prepared: the one having sulfonic acid group distributed uniformly throughout genular microparticles (A-type) and the other having sulfonic acid group located mainly at the exterior surface of genular microparticles (E-type). The results were found that the reaction rate and the selectivity of the E-type catalyst were higher than those of the A-type catalyst.

• Bulletin of the Korean Chemical Society
• /
• 제25권5호
• /
• pp.687-693
• /
• 2004

Composite membranes with a titania layer were prepared by soaking-rolling method with the titania sol of nanoparticles formed in the sol-gel process and investigated regarding the vapor permeation of various organic mixtures. The support modification was conducted by pressing $SiO_2$ xerogel of 500 nm in particle size under 10 MPa on the surface of a porous stainless steel (SUS) substrate and designed the multi-layered structure by coating the intermediate layer of ${\gamma}-Al_2O_3$. Microstructure of titania membrane was affected by heat-treatment and synthesis conditions of precursor sol, and titania formed at calcination temperature of 300$^{\circ}C$ with sol of [$H^+$]/[TIP]=0.3 possessed surface area of 210 $m^2$/g, average pore size of 1.25 nm. The titania composite membrane showed high $H_2/N_2$ selectivity and water/ethanol selectivity as 25-30 and 50-100, respectively. As a result of vapor permeation for water-alcohol and alcohol-alcohol mixture, titania composite membrane showed water-permselective and molecular-sieve permeation behavior. However, water/methanol selectivity of the membrane was very low because of chemical affinity of permeants for the membrane by similar physicochemical properties of water and methanol.

• 멤브레인
• /
• 제25권5호
• /
• pp.373-384
• /
• 2015

지난 수십 년 동안, 고분자막은 기체 분리 분야에서 큰 역할을 해왔다. 온실가스의 주범인 이산화탄소를 분리하기 위해서는 더 높은 투과선택도와 장수명 및 대면적 등을 요구한다. 하지만 기존 고분자 분리막들은 투과도와 선택도의 역상관 관계 특징을 지니고 있으며, 무기물질은 투과성능이 우수하지만 가격이 비싸다는 단점이 있다. 최근 많은 연구가 진행되어온 혼합 매질 분리막은 고분자와 무기물질의 이점들을 혼합하여 기체 분리막의 차세대로서 큰 이목을 이끌고 있다. 혼합 매질 분리막은 대칭적인 구조 또는 비대칭적인 구조를 가지고 있으며, 투과량을 증가시키기 위해서는 비대칭적인 구조가 바람직하다. 혼합 매질 분리막에서 가장 중요한 변수로는 무기입자의 균일한 분산과 무기물과 고분자 사이의 좋은 계면을 형성하는 것이다. 최근에 새로운 분류의 다공성 결정성 물질인 금속 유기 구조체(MOF)는 이산화탄소 분리용 소재로써 많은 관심을 끌고 있다. MOF의 한 종류 중, zeolitic imidazolate frameworks (ZIF)는 가장 흔하게 사용되는 무기입자이며 이는 입자의 크기를 작게 만들 수 있으며, $CO_2$를 분리하기에 적절한 기공의 크기를 가지고 있기 때문이다. 이 밖에 혼합 매질 분리막에 사용되는 특정 물질들을 적용하기 위해서는 선택도와 크기, 호환성, 안정성 등을 동시에 최적화시켜야 한다. 이와 같이 본 총설에서는, 혼합 매질 분리막에 관련된 주요 연구내용과 이러한 연구를 수행하는 대표적인 전략들을 소개하였다.

• Bulletin of the Korean Chemical Society
• /
• 제25권3호
• /
• pp.357-360
• /
• 2004

We developed in the present study molecular imprinted polymers (MIPs), using single templates (pentoxifylline, caffeine and theophylline) and mixed-templates (pentoxifylline-caffeine, pentoxifylline-theophylline and caffeine-theophylline). The MIPs were prepared with methacrylic acid (MAA) as the monomer, ethylene glycol dimetharylate (EGDMA) as the crosslinker and 2,2'-azobis(isobutyronitrile) (AIBN) as the initiator. The obtained polymer particles (particle size after grinding was about 25-35 ${\mu}$m) were packed into a HPLC column (3.9 mm i.d. ${\times}$ 150 mm). The selectivity and chromatographic characteristics of the MIPs were studied using acetonitrile as the mobile phase at a flow rate of 0.8 mL/min. UV detector wavelength was set at 270 nm. Different single template MIPs showed different molecular recognitions to the templates and the structurally analogues, according to the rigidity and steric hindrance of the compounds. Recognition was improved on the mixed-template MIPs as a result of the cooperation or sum effect of the templates, whereas on the pentoxifylline-theophylline imprinted polymer, the highest selectivity and affinity were obtained. Separations of the test compounds on different polymers were also investigated.

• 멤브레인
• /
• 제24권6호
• /
• pp.438-447
• /
• 2014

무정형의 괴상의 다공성 borosilicate는 trimethylborate (TMB)/ tetraethylorthosilicate (TEOS) 몰비 0.01~0.10 겔체를 $700{\sim}800^{\circ}C$ 온도범위에서 열처리 하였을 때 얻어졌다. BET와 SEM 관찰에 의하면 $700{\sim}800^{\circ}C$에서 얻어진 borosilicate의 표면적은 $251.12{\sim}355.62m^2/g$이고, 기공직경은 3.5~4.9 nm이며, 입자크기는 30~60 nm이었다. TGA측정에 의하면 borosilicate가 poly[1-(trimethylsilyl)propyne](PTMSP)에 첨가되었을 때 PTMSP-borosilicate 복합막의 열적 안정성은 향상 되었다. SEM관찰에 의하면 borosilicate는 $1{\mu}m$ 크기로 복합막 내에 분산되어 있었다. 기체투과실험에 의하면 PTMSP에 borosilicate 함량이 증가하면 자유부피, 공동, 기공률이 증가하여 기체투과가 용해확산에 의한 것보다 분자체거름, 표면확산, Knudsen 확산에 의해 일어나는 경우가 점차 증가함으로 해서 $H_2$와 $N_2$의 투과도는 증가하고 선택도($H_2/N_2$)는 감소하였다.

• Bulletin of the Korean Chemical Society
• /
• 제30권2호
• /
• pp.343-347
• /
• 2009

In this study, the surface of inorganic fine powders is hybridized with nanovesicles containing tocopheryl acetate prepared with hydrogenated lecithin via a coating process. From AFM and SEM analyses it is found that the surface of the nanovesicle-coated fine powders lost their traditional topology and improved in terms of their roughness, skewness, and kurtosis. In addition, TEM observations revealed the formation of a 5 nm thick coating layer on the surface of the fine powders. These hybridized powders, in which bioactive materials such as tocopheryl acetate can be embedded, can be employed as a part of a drug delivery system due to their special ability to control release rate and temperature selectivity. Physical properties of the powders, i.e., the different angle and friction coefficient, were excellent.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2002년도 춘계 기술심포지움 논문집
• /
• pp.274-278
• /
• 2002

The purpose of this study was to characterize the reaction of Cu surface with Cu slurry and CMP performance as a function of additives in CMP slurry. The polish rate of Cu was dependent on the kind of organic acids added in slurry. It was considered that polish rate of Cu was dependent on the concentration of carboxylates and mean particle size. When the etchant and oxidant were added in slurry, the highest removal rate and lower etch rate were measured at neutral pH. The addition of etchant, oxidant and pH adjustor played key roles of CMP ability in slurry. As the pH increased, polish rate of Cu was increased by the enhanced the mechanical effects due to effective dispersion of slurry particles. Alumina abrasives was more desirable for 1st step slurry because of high removal rate of Cu and high selectivity ratio among TaN and Cu.