• 대한기계학회논문집B
• /
• 제26권4호
• /
• pp.539-546
• /
• 2002

The Holographic Particle Velocimetry system can be a promising optical tool leer the measurements of three dimensional particle velocities. In this research, validation experiments for the development of holographic particle velocimetry system for spray droplets were conducted with measuring the velocities of glass beads on a rotating disk. Uncertainty analysis was performed to identify the sources of all relevant errors and to evaluate their magnitude. The measurement results of distance between glass beads, size, and velocities obtained with holographic method are compared reasonably well with the known values within acceptable range of errors.

• 방사성폐기물학회지
• /
• 제9권1호
• /
• pp.41-48
• /
• 2011

한국원자력연구원 내 지하 처분 연구시설(KURT)에서 채취한 지하수에 존재하는 나노 콜로이드 입자의 크기 및 농도를 현상에서 조사하기 위해 이동식 레이저 유도 파열 검출 장치를 개발하였다. 제작한 장치는 CCD 카메라를 이용하여 레이저 유도 플라즈마가 발생한 위치를 2-차원 영상으로 기록함으로써 광학적으로 입자의 크기를 결정할 수 있다. 크기가 정확히 알려진 폴리스틸렌 표준 입자를 이용하여 입자 크기 측정용 검정 곡선 (calibration curve)을 구했고, 이를 이용하여 지하 처분 연구시설에서 채취한 지하수 내 콜로이드 입자의 크기를 측정하였다. 지하수 내 존재하는 콜로이드 입자의 평균 크기는 $108{\pm}26$ nm 임을 보였고, 농도는 50 ppb 이하인 것으로 추정하였다.

• Journal of Korean Society for Atmospheric Environment
• /
• 제22권E1호
• /
• pp.35-43
• /
• 2006

Ambient particle size distributions of PCBs and their dry deposition fluxes were measured at a site in Seoul to quantify dry deposition fluxes of PCBs and size characteristics of PCBs in the air, and to estimate ambient concentrations of gaseous PCBs and dry deposition fluxes. The dry deposition plate was used to measure dry deposition fluxes of particulate mass and PCBs and a cascade impactor and rotary impactor were used to measure ambient particle size distributions for small ($D_p<9{\mu}m$) and large ($D_p>9{\mu}m$) particles, respectively. Six sample sets were collected from April to July 1999. The fluxes of particulate total PCBs (the sum of 43 congeners) ranged from 160 to $607ng\;m^{-2}day^{-1}$. The size distribution of total PCBs was bimodal with two peaks in small particle size ($D_p{\sim}0.6\;and\;6{\mu}m$, respectively) and, thus, mass concentration being dominant in small particles. The mean particulate PCBs concentration was $6.9{\mu}g$ PCBs/g. The concentrations of PCB homologues in the gas phase were estimated based on the particle/gas partition coefficient ($K_p$) with the measured values of particulate PCBs in this study and they were comparable to those observed in other previous studies. Dry deposition fluxes were estimated by calculating dry deposition velocities.

• 한국입자에어로졸학회지
• /
• 제5권4호
• /
• pp.179-188
• /
• 2009

The dry deposition fluxes of particulate polychlorinated biphenyls (PCBs) were measured along with their mass size distributions at Seoul and Incheon in fall in 1999. The dry deposition fluxes of PCBs were in the range of $16.7{\sim}62.2ng/m^2/day$. The ambient concentrations of particulate PCBs were in the range of 0.07 to $0.20ng/m^3$. Generally, the mass size distribution of particulate PCBs shows bi-modal distribution. The mass fraction of PCBs in the fine particle fraction ($D_p<2.1 {\mu}m$) was over than 55% of the total PCBs concentrations. It was found that Seoul and Incheon were not the major source of PCBs emissions in Korea. Based on the comparison with the measurement data in summer, 1999, it is likely that both the dry deposition fluxes and ambient particulate PCBs concentrations were not site-specific.

• 한국재료학회지
• /
• 제27권7호
• /
• pp.353-358
• /
• 2017

Recycled cenosphere, which is a hollow shaped particle from fly ash, has become attractive as a building material due to its light weight and excellent heat insulation and soundproof properties. In this paper, we investigated the effect of cenosphere size on the physical and optical properties. High brightness of cenosphere as raw material is required for a wide range of ceramics applications, particularly in fields of building materials and industrial ceramic tiles. Cenospheres were sorted by particle size; the microstructure was analyzed according to the cenosphere size distribution. Cenospheres were generally composed of quartz, mullite, and amorphous phase. Colour measurement corresponding to chemical composition revealed that the contents of iron oxide and carbon in the cenospheres were the major factors determining the brightness of the cenospheres.

• 마이크로전자및패키징학회지
• /
• 제29권4호
• /
• pp.35-40
• /
• 2022

본 연구에서는 실버 파우더의 입자 크기, 즉 평균입자 크기가 2㎛, 7㎛, 이들의 혼합(50:50wt%), 이렇게 3가지 실버 페이스트를 제조하여 점도 및 점탄성, 경화후에 잔류용제 유무 확인을 위한 TGA측정, Strain에 따른 저항변화 및 전극 표면구조 변화에 대해서 검토한 결과 다음과 같은 결론을 얻을 수 있었다. 이러한 결과를 정리하면 Strain에 따른 저항변화를 최소화하기 위해서는 실버 파우더의 입자를 2㎛정도인 것이 가장 바람직함을 알 수 있었다.

• 한국진공학회지
• /
• 제16권6호
• /
• pp.468-473
• /
• 2007

본 논문에서는 저압환경에서 실시간으로 나노입자를 측정할 수 있는 PBMS(Particle Beam Mass Spectrometer)의 개발에 대해 서술하였다. 개발된 PBMS의 교정을 위해 NaCl입자를 사용하였다. DMA(Differential Mobility Analyzer)를 통해 +1가로 하전된입자를 1 lpm 발생시켜 그 중 0.086 lpm을 PBMS 입구의 오리피스를 통해 분기하여 유입시켰다. DMA와 PBMS의 전류값을 비교하여 전송효율을 측정한 결과 입자의 크기에 따라 약 50$\sim$60%를 나타내었다. 또한 DMA에서 특정한 크기의 입자를 발생시켜 PBMS로 측정하였으며 그 결과는 입자크기별 농도분포와 잘 일치함을 확인할 수 있었다.

• 한국염색가공학회지
• /
• 제21권1호
• /
• pp.30-37
• /
• 2009

Studies on plants such as lotus leaf suggested that dual-scale structure could contribute to super-hydrophobicity. We introduced super-hydrophobicity onto poly(ethylene terephthalate)(PET) fabric with dual-scale structure by assembling $TiO_2$ nano sol. PET fabric was treated with $TiO_2$ sol, water-repellent agent using various parameters such as particle size, concentration. Morphological changes by particle size were observed using field emmission scanning electron microscopy(FE-SEM) and AFM measurement, contact angle measurement equipment. The contact angle of water was about 138.5$^{\circ}$, 125.8$^{\circ}$, 125.5$^{\circ}$ and 108.9$^{\circ}$ for PET fabric coated with 60.2nm, 120.1nm, 200nm and 410.5nm $TiO_2$ particles, compared with about 111.5$^{\circ}$ for PET fabric coated with water repellent. When we mixed particle sizes of 60.2nm and 120.1nm by 7:3 volume ratio, the contact angle of water was about 132.5$^{\circ}$. And we mixed particle sizes of 60.2nm and 200nm by 7:3 volume ratio, the contact angle of water was about 141.8$^{\circ}$. Also we mixed particle sizes of 60.2nm and 410.5nm by 7:3 volume ratio, the best super-hydrophobicity was obtained. In this paper, we fabricated various surface structures to the water-repellent surfaces by using four types of $TiO_2$ nano-particles, and we found that the nanoscale structure was very important for the super-hydrophobicity.

• 대한토목학회논문집
• /
• 제37권2호
• /
• pp.467-474
• /
• 2017

하천 합류부에서는 지형적 특성에 기인하는 고유한 수체혼합양상과 흐름특성을 보인다. 이러한 합류부에서의 2차원적 수체혼합양상을 파악하기 위해서는 측선기반이 아닌 평면적 계측이 필요하다. 본 연구에서는 낙동강-금호강 합류부를 대상으로 UAV를 활용한 정성적 수체혼합모니터링과 ADCP, 다항목수질측정기, 현장용광학입도분석기(LISST : Laser In-Situ Scattering & Transmissometry)를 이용한 흐름, 수질, 부유입자특성에 대한 측정을 통해 하천합류부에서의 2차원적 수체흐름 및 물질혼합 특성을 파악할 수 있는 현장측정기법을 제시하고 적용성을 검토하고자 하였다. 수리량, 수질인자, 부유입자의 농도 및 입도분포에 대한 현장측정을 통해 복잡한 지형적 특성을 가지는 하천합류부에서의 2차원적 흐름양상과 그에 따른 수체 및 물질혼합양상을 파악할 수 있음을 확인하였다.

• Journal of Biosystems Engineering
• /
• 제38권2호
• /
• pp.103-112
• /
• 2013

Background: The Korean government launched a project in 2008, where the amount of rice used as raw ingredient in rice-based foods in 2012 was planned to increase up to 10% (470,000 ton) of the total rice production through developing various new rice-based processed foods and their commercial manufacturing technology. Among the four major rice-based processed foods, rice cakes and noodles need rice flour as their main raw ingredient. Technology in rice flour utilization and manufacturing is far behind than the technology pertinent to wheat flour in many subject areas. Purpose: This review aims to provide information on rice flour utilization and manufacturing with some fundamental subjects in the area of size reduction. Results: A variety of food items including bread, noodle, cake, cookie, muffin, pre-mix, beverage, vinegar, surimi, and artificial meat have found rice flour as their raw ingredient. Rice bread made out of 100% rice flour has been developed and is now sold in retail stores. Various noodle products made from rice flour are also on the market. Issues on product definition and labeling regulation about rice flour content of the products were explored. Generalized grinding equations available in the literature were seldom used in practice; instead, it has been a general practice to develop empirical equations from test milling data. Introductory remarks on three popular particle size measurement methods (sieving, Coulter counter, light diffraction) were explained. Mathematical expressions frequently used to describe particle size distribution and to correlate cumulative quantity of particles with particle size were represented. Milling methods used in producing rice flour were described along with their advantages and disadvantages. Because of their profound effect on functional properties of the rice flour, four rice flour milling equipments used at both laboratory experiments and commercial manufacturing plants were discussed.