• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.44-45
• /
• 2005

Both $Al_2O_3$ and $SiO_2$ nanopowders were ball-milled to break large agglomerates$(500nm\sim10{\mu}m$). To improve the dispersion of ball-milled nanoparticles in transformer oil, surface modification was performed with oleic acid(OA). The modified nanoparticles were examined by the particle size analyzer, electron microscope, Infrared spectroscopy and stability analyser. Particle Size distributions were measured for ball-milled particles, and the results were compared with the size distribution of primary particles. FTIR results indicated that hydrophobicity of modified nanoparticles was due to the chemical reaction between hydroxyl groups of particle surface and oleic acid. The dispersion stability of surface-modified nanoparticles was quite good in transformer oil.

• The Journal of Advanced Prosthodontics
• /
• 제14권2호
• /
• pp.78-87
• /
• 2022

PURPOSE. This study aimed to compare the effect of different surface treatments and luting agent types on the shear bond strength of two ceramics to commercially pure titanium (Cp Ti). MATERIALS AND METHODS. A total of 160 Cp Ti specimens were divided into 4 subgroups (n = 40) according to surface treatments received (control, 50 ㎛ airborne-particle abrasion, 110 ㎛ airborne-particle abrasion, and tribochemical coating). The cementation surfaces of titanium and all-ceramic specimens were treated with a universal primer. Two cubic all-ceramic discs (lithium disilicate ceramic (LDC) and zirconia-reinforced lithium silicate ceramic (ZLC)) were cemented to titanium using two types of resin-based luting agents: self-cure and dual-cure (n = 10). After cementation, all specimens were subjected to 5000 cycles of thermal aging. A shear bond strength (SBS) test was conducted, and the failure mode was determined using a scanning electron microscope. Data were analyzed using three-way ANOVA, and the Tukey-HSD test was used for post hoc comparisons (P < .05). RESULTS. Significant differences were found among the groups based on surface treatment, resin-based luting agent, and ceramic type (P < .05). Among the surface treatments, 50 ㎛ air-abrasion showed the highest SBS, while the control group showed the lowest. SBS was higher for dual-cure resin-based luting agent than self-cure luting agent. ZLC showed better SBS values than LDC. CONCLUSION. The cementation of ZLC with dual-cure resin-based luting agent showed better bonding effectiveness to commercially pure titanium treated with 50 ㎛ airborne-particle abrasion.

• 한국응용과학기술학회지
• /
• 제26권4호
• /
• pp.385-393
• /
• 2009

Different types magnesium hydroxide groups have been obtained using the hydrothermal precipitation technique from magnesium sulfate and calcium carbonate solution. The Mg atom coordinated around O atom of ${SO_4}^{2-}$ in another layer to form a multi-layer structure crystal. The influence of synthesis parameters on the morphological characteristics and size of magnesium hydroxide groups precipitated in aqueous were investigated such as different of additive and pH. Magnesium hydroxide groups were decomposed gradually and converted finally to MgO particles after heated in air temperature up to $1050^{\circ}C$. The particle size and it's distribution morphology, crystal phase and thermal behavior of the samples were characterized through XRD, SEM, EDS, and TG/DTA.

• 접착 및 계면
• /
• 제3권2호
• /
• pp.9-16
• /
• 2002

자가유화방식의 수분산 폴리우레탄의 경우, 이온성 그룹이 포함된 프리폴리머를 중화시켜 수분산시킨 후 분자량을 증가시키기 위해 사슬연장을 하게 된다. 본 연구에서는 아민계 사슬연장제를 사용하여 사슬연장 시 연속상의 pH의 변화를 관찰하였으며, 이온성 그룹의 함량, 사슬연장제의 사슬 길이와 투입 속도 등과 같은 공정 변수에 따른 최적의 사슬연장 정도와 사슬연장 시 평균 입도 변화를 분석하였다. 투입되는 사슬연장제의 농도가 증가함에 따라서 연속상의 pH가 증가하게 되고, 사슬연장 정도에 따른 pH 변화곡선의 변곡점으로부터 최적의 사슬연장제 함량을 결정하였다. 사슬연장제 투입 속도에 따른 평균 입도 크기 변화의 경우, 초기 사슬연장전의 평균 입자 크기는 거의 비슷하다가 최종 사슬연장이 끝난 후에 사슬연장제 투입 속도가 빠른 쪽의 평균 입도 크기가 증가한다는 사실이 관찰되었다. 이온성 그룹의 함량이 증가할수록 친수성기의 농도가 증가하므로 평균 입도 크기는 감소한다. 사슬연장제의 사슬 길이의 영향이 최적의 사슬연장 정도를 결정하는데 큰 영향은 미치지 않고, 사슬의 길이가 긴 아민류를 사용하였을 시 입자와 입자 사이에서 사슬연장 반응을 통해 입자의 크기가 크게 증가하는 경향이 관찰되었다.

• 구강회복응용과학지
• /
• 제30권2호
• /
• pp.102-111
• /
• 2014

목적: 본 연구의 목적은 air-blasting particle size를 달리하고 분사 압력과 시간을 통상보다 크게 증가시켜 표면에 큰 손상을 유발한 군을 상대적으로 작은 손상을 유발한 군과 비교하여 파절 저항과 접착 강도 차이를 보이는지 평가하는 데 있다. 연구 재료 및 방법: 지르코니아($LAVA^{TM}$) 디스크 표면에 각각 $30{\mu}m$- particle size (Cojet) 2.8 bar 15초, $110{\mu}m$- (Rocatec) 2.8 bar 15초, $110{\mu}m$- (Rocatec) 3.8 bar 30초로 조건을 달리하여 표면처리 후 각각 이축 굽힘하중 강도 실험과 접착 파절 하중 실험을 실행하였다. 접착은 상아질 유사 베이스에 $200{\mu}m$ 두께의 레진시멘트로 시행하여 인장력을 극대화하였으며 음향방출(AE) 센서로 실패하중을 검출하였다. 결과: 이축 굽힘하중 강도, 접착 파절하중은 세 군간 서로 유의성 있는 차이를 보이지 않았다(P > 0.05). 접착 시편의 균열은 대부분 radial crack이었다. 결론: 정하중 평가의 한계 내에서, air-blasting particle size와 압력에 의한 표면 손상은 크지 않았으며, 접착 파절하중 평가는 표면 손상과 접착 강도를 동시에 평가할 수 있는 방법이라 여겨진다.

• 한국물환경학회지
• /
• 제33권6호
• /
• pp.728-735
• /
• 2017

Many restoration projects are underway to revive disturbed streams. In order to achieve successful stream restoration, a variety of microhabitats should be created to promote biological diversity. Research on biological classification of microhabitats is essential for biological diversity. However, research on classification using only physical environmental factors has been carried out. The purpose of this study is to classify and quantify the microhabitat of the stream by using macroinvertebrates systematically. In this study, eight wadeable streams and four non-wadeable streams were surveyed to identify the benthic macroinvertebrates in these various microhabitats. Among the physical environmental factors (current velocity, water depth, substrate), the particle size of the substrate was the most influential factor in the emergence of the Habitat Orientaion Groups. Among the HOGs, clinger and burrower were highly correlated with physical environment factors and showed the opposite tendency. The distribution of clinger and burrower according to the physical environmental factors showed two tendencies based on the current velocity (0.3 m/s) and water depth (0.4 m). In addition, the particle size of the substrate showed three trends (${\leq}-5.0$, -5.0 < mean diameter ${\leq}-2.0$, > -2.0). Based on the abundance tendency of these two HOGs, the microhabitats were classified into nine types, from a eupotamic microhabitat to a lentic microhabitat. Classification of the microhabitats using HOGs can be employed for creating microhabitats to promote biological diversity in future stream restoration plans.

• The Journal of Advanced Prosthodontics
• /
• 제8권4호
• /
• pp.259-266
• /
• 2016

PURPOSE. The purpose of this study was to assess the effect of surface treatments on shear bond strength of resin composite bonded to thermocycled and non-thermocycled CAD/CAM resin-ceramic hybrid materials. MATERIALS AND METHODS. 120 specimens ($10{\times}10{\times}2mm$) from each material were divided into 12 groups according to different surface treatments in combination with thermal aging procedures. Surface treatment methods were airborne-particle abrasion (abraded with 50 micron alumina particles), dry grinding (grinded with $125{\mu}m$ grain size bur), and hydrofluoric acid (9%) and silane application. According to the thermocycling procedure, the groups were assigned as non-thermocycled, thermocycled after packing composites, and thermocycled before packing composites. The average surface roughness of the non-thermocycled specimens were measured after surface treatments. After packing composites and thermocycling procedures, shear bond strength (SBS) of the specimens were tested. The results of surface roughness were statistically analyzed by 2-way Analysis of Variance (ANOVA), and SBS results were statistically analyzed by 3-way ANOVA. RESULTS. Surface roughness of GC were significantly lower than that of LU and VE (P<.05). The highest surface roughness was observed for dry grinding group, followed by airborne particle abraded group (P<.05). Comparing the materials within the same surface treatment method revealed that untreated surfaces generally showed lower SBS values. The values of untreated LU specimens showed significantly different SBS values compared to those of other surface treatment groups (P<.05). CONCLUSION. SBS was affected by surface treatments. Thermocycling did not have any effect on the SBS of the materials except acid and silane applied GC specimens, which were subjected to thermocycling before packing of the composite resin.

• 한국자기학회지
• /
• 제6권1호
• /
• pp.28-35
• /
• 1996

자기 테이프 제조용 초미립 자성 철 분말의 분산 거동을 파악하기 위하여 vinyl계 바이더, polyurethane 바인더, 윤활제등 첨가제 종류 및 양에 따른 분산 거동 및 물리특성들을 조사하였다. 분산성은 바인더의 funtional group의 종류, 자성체와 바인더의 비율등에 크게 영향을 받았으며 적정 조건의 선택으로 분산성은 종래보다 20% 증가하 였다. 이에 따라 자기 특성중 포화 자화는 종래의 경우보다 200 Gauss 증가하였으며, 전자 변환 특성중 휘도 S/N (signal to noise ratio)은 2dB 증가하였다. 적절한 윤활제의 종류및 양에 따라 tape의 마찰계수는 0.15 감소하였으며, 이에 따라 tape의 내구성중 휘도 S/N 열화특성이 4dB 이상 향상되었다.

• Korea-Australia Rheology Journal
• /
• 제15권4호
• /
• pp.179-185
• /
• 2003

Associating polymers act as flocculants in colloidal suspensions, because the hydrophobic groups (hydrophobes) can adsorb onto particle surfaces and create intermolecular cross-linking. The steady-shear viscosity and dynamic viscoelasticity were measured for suspensions flocculated by multichain bridging of associating polymers. The effects of surfactant on the suspension rheology are studied in relation to the bridging conformation. The surfactant molecule behaves as a displacer and the polymer chains are forced to desorb from the particle surfaces. The overall effect of surfactant is the reduction of suspension viscosity. However, the additions of a small amount of surfactant to suspensions, in which the degree of bridging is low, cause a viscosity increase, although the number of chains forming one bridge is decreased by the forced desorption of associating polymer. Since the polymer chains desorbed from one bridge can form another bridge between bare particles, the bridging density over the system is increased. Therefore, the surfactant adsorption leads to a viscosity increase. The surfactant influences the viscosity in two opposing ways depending on the degree of bridging.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2003년도 학술발표논문집
• /
• pp.163-166
• /
• 2003

In this study, a grouping of particle-size distributions(PSDs) by means of the fuzzy c-means clustering method(FCM) was presented. The classification was performed with the whole and the major soil series representing pedological origin. In case of the major soil series, PSDs were clustered as $2{\sim}4$ groups and the characteristics of clustering results were quite different between the soil series. It was found that the characteristics of PSDs at center of each class can be explained by formation process of each soil series. In case of whole soil data, PSDs were classified to 8 classes in which 4 classes were single mode and 4 classes were bimode distributions. Through this study, it is concluded that pedogenetic process is a plausible explanation for grain size distribution of soils.